obd2scantool.info

Launch X431,Autel Tools,Autoboss tools,Autocom CDP

Latest Posts

What is funtion of Porsche Piwis II Engineering Mode ?

Piwis II Porsche diagnostic tool, Porsche Piwis 2 with regular version and Piwis 2 engineering mode, what’s the Piwis tester ii developer mode spcial? what can the Porsche piwis II engineering mode do? Here eobdtool.com share PIWIS II developer mode function as following help to customer choose it.

The software version is:V18.100

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

 

What is funtion of Porsche Piwis Tester II Engineering mode ?

 

1. Start/stop”LAST MODE”wait for stopping the engine and change memory

2. Spoiler”lessen time when the car starts

3. Spoiler”fixed”

4. Spoiler”change angle”

5. Change VO code

6. Close Air Mercury

7. Upgrade power

8. Remove the tire pressure sensor

9. Install reversing camera

10. Install USB/BT

11. Close the seat belt warning

12. Change CDR/PCM operation interface

13. Air condition memorization

14. Start CDR_AUX

15. Open the PCM function

16. Manually set codes

17. Automatically set codes

18. Manually do programming

19. Automatically do programming

 

PIWIS II Developer Mode software display:

 

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year for Porsche car models

 

http://www.cnautotool.com/blog/2017/07/20/what-is-funtion-of-porsche-piwis-ii-engineering-mode/

Bluetooth Cat3 CAT Caterpillar ET Diagnostic Adapter III 2015A Heavy Duty Truck Scanner New Available

Latest 2015A CAT ET 3 III WIFI Communication CAT Adapter 3 P/N 317-7485 CAT3 Professional Heavy Duty Truck Diagnostic Tool New Available!!

29-1

CAT Caterpillar ET Diagnostic Adapter III is the latest generation of the Communication Adapter group, and replaces the Comm Adapter II. This is the only recommended communication device for et 3,and the only datalink device that will allow you to properly communicate with a CA engine on dual datalinks. This function is needed for some ET (Electronic Technician) functions.

CAT Communications Adapter III Feature:
1. WiCaterpillar Communication Adapter3
2.Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet
(future release), CT DataLink, and J1708 (ATA) vehicle networks;
3.Flash program allows adapter firmware upgrades as additional features become available;
4.Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
5.Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

CAT ET Diagnostic Tool CAT ET 3 III Bluetooth function:
-Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
-View ECM\’s current configuration and change user settings
-Perform diagnostic tests and calibrations, and calibrate
-Electro-mechanical and electro-hydraulic components
-Context sensitive help leads operator through every task ET can perform
-Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.

CAT ET 3 Wireless Adapter III truck diagnostic tool Function:
1.ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3.Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4.Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5.To help dealer identify problems without visiting machine.
6.Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Showswhen problem occurred and how often it happened.
7.Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubeshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the “How To” around the software.
OBD II Scanner Tools provide best quality CAT Communications Adapter III with laptop. You can get it to work when you receive the package. Our engineer will activation the software for you, it is very convenience and easy to use.

MB SD C4 Tourismo bus communication error (fixed)

I bought the MB SD C4+Dell D630 Laptop pre-installed bundle, when I test it have the problem Mb Star C4 cannot power on when connected with Mercedes Tourismo bus, I contacted there customer service at cnautotool.com, and here is the solution provided by their engineer.

I will explain my problem in detail:

” I have tried 2 different mb sd connect c4 on Tourismo buses and sd connect does not power on.In the meantime those MB SD Connect C4 works normally to any other MB Truck and car.also on Tourismo have check MB Star C3 and works normally.”

You should check:

bus with OBD
pin 4 + 5
both must be connected and ground

In SDConnect “-” is 5 pin only. There is 4 contact not used in 16pin OBD connector.

“i’m getting an communication error when connecting xentry to a Mercedes tourismo.”

4-1

A Communication error has occurred when access FPS system

4-2
4-3
Solution:

– turn OFF/ON BUS ground switch (our remove battery – cable). FPS1 wake up and MB Star diagnostic recognized FPS1/VIN code.

or

– enter the DAS ATEGO truck come and place manually and then it will work perfect

” Another problem is : “Currently the speed limit is set to 100 km/h. I’m trying to set it to higher value (with Mercedes Star Diagnosis MB SD C4 DAS using modified EOL files). On the menu it tells me that I can, because there are higher values (105 km/h. 112 km/h, etc). But when I try to set the speed limit to higher than 100 km/h it doesn’t allow me to do it (can’t save the changes). When I try to set it below 100 km/h everything goes fine.”

I done the Access special settings , and it working perfect now!

The Original Factory CAT Caterpillar Adapter III

the Difference Between the Oirignal Factory CaterPillar ET Diagnostic Adapter III with OEM Caterpillar ET Diagnostic III

1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.

2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.

if you need learn more information about the Caterpillar ET Diagnostic Adapter III 2017 please checK;

http://www.cnautotool.com/search.php?keywords=Caterpillar&imageField=+

2017.05 Latest BMW ICOM ISTA-D4.05 ISTA-P 3.61 Reviews

 

BMW ICOM software has been updated to V2017.05 Version, the ISTA-D 4.05.20 ISTA-P 3.61.4.002.And here are ISTA-D4.05.20 ISTA-P3.61.4.002 on Windows 7 reviews.

BMW ICOM ISTA 2017.05 review 1:

Download ISTA-D 4.04.31 ISTA-P 3.61.4 from www.cnautotool.com

Well done !
Perfect instruction for installing

I personally went for VM WS installation, because of the portability is a very important issue
for me.

For these run out of disk space, like me, i suggest to install ISTA+in VMWare WS Ver 12X with
win7 X64 Guest, Earlier VMWare versions down to 10 probably will work as well. Disk space need
runs to 350GB. I used 350GB diskspace on SSD installed in a caddy sitting in DVD slot of an i3
notebook.

ISTA can be working good soon, in case you are following the excellent instructibles of spider80
without missing not a one step of instruction.

X86 apps in VM X64 environment like itoolradar arose a java problem, even when I tried to
isntall an outdated X86 Java version.

Mayor Ista+/ISTA P Working like a charm(i used icom with latest firmware update). Running ISTA-P
requires good charging

equipment with constant additional load otherwise it will quit session. BMW currentliy advices
supply> 70A. For older cars like E-series.
25A seem to be ok in my opinion.
BMW ICOM 2017.05 ISTA Review 2:

Installed…100% working…so had to log back in and reply with Big thanks to the super package
with ecellent step by step install instructions.

Just had two little snags when installing under win7 X86….

1) vcrdist_X86 2008.exe download was corrupt…but easily solved by re-downloading from
microsh@ft
2) no java included in download package…again easily found via Guugle! many thanks again
spider80…you’re done an supporb job here. with brilliant step by step instructions

now I just need to find an BMW ICOM Next interface at reasonable money for all to fully work on
latest B’Mers!

Autel Maxidas DS808 full kit fit small repair shop – affordable price and good performance

I have the first generation Autel Maxidas DS708 for many years, I love it because of its reasonable price and cost efficient function, but what a pity that it will not be updated any more.

Then you consider to have one Autel Maxidas DS808K full kit which adds extra special functions i.e injector coding, key coding, adaptation, ECU information, trouble codes, freeze frame, live data, active test and special functions. I have one small repair shop and have many different car brands fix, MaxiDAS DS808 can fully meet my requirements.

It has many different vehicles’ diagnostic adapters which are not standard 16pin(see following pic). Maxidas DS808 is compatible to many US, European, Asian vehicles, user friendly and has software for different vehicle models and systems.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-1.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-2.jpg

Its new CPU and LCD touch screen (7″ LCD 1024×600 resolution touch scrren), dramatically improved the entire users’experience, much more smooth comparing with DS708. Personally, I would recommend DS808 for those small shops with limit budgets. Of course, if money is not a problem, Maxisys Elite may be your good choice.It is smaller than ms906, so very handy.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-3.jpg

This is what I got Autel Maxidas DS808 full kit
www.cnautotool.com claims they are the exclusive sales dealer authorized by auteltech. Means lowest price $845 free shipping.

BTW, I am not affiliate with this shop, but a customer.

Next is my Autel Maxidas DS808 tests report:
Program new keys ………Yes
Program the abs module ……..NO (maxisys pro yes)
AutoVIN Technology……….Yes
MaxiFix Cloud-Based Information System ……..yes
Shop Manager ………..yes
Injector coding …….yes
Key coding ……….yes
Many special function works: Oil Reset Service, TPMS Programming Service, EPB Service, ABS/SRS Services, SAS Calibration Service, DPF Regeneration Service

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-4.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-5.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-6.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-7.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-8.jpg

Register Autel Maxidas DS808:

Registering the device was easy. I simply go to autel’s website and set up an account. Once I do that I take the registration code/passcode from the scan tool and register it on the website. I  then make sure that the scan tool is hooked up to my wifi which is setup in settings. Then I am ready to update the scan tool with the latest software.

Update Autel Maxidas DS808:

Make sure the Display Tablet is connected to a power source with stable access to the internet.

Tap the Update application button from the Autel Maxisys Job Menu;or tap the update notification message when received one; or tap the Update icon on Vehicle Menu in Diagnostics application.

The Update application screen displays.

Check all available updates:

If you decide to update all the items, tap the Update All button.

If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).

Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.

When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-9.png

Autel MaxiSYS MS906,Autel DS808 which to buy?

As known , this is Autel Maxidas revolution course:

Autel Ds708 scanner -> Autel MaxiSYS MS906-> Autel DS808 standard package-> Autel DS808K full package

Honda CR-V Full Diagnosis by Launch X431 Pro Mini Review

Launch X431 Pro Mini review for sharing:

Use new tool Launch X431 Pro Mini OBD2 Diagnostic Scan Tool to diagnose Honda CR-V full systems. 6.9 inch screen bigger than my friend’s X431 Diagun III and run faster!

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-1.jpg

About the hardware, I really love it’s special handle! Easy to grab it and fit my hand perfectly.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-2.jpg

Launch X431 Pro Mini connect car by new Bluetooth VCI module, different from Diagun III.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-3.jpg

After connect the VCI box with car, power on X431 Pro Mini device.

Click “Diagnosis” button on main menu, choose car maker region to select car brand.

Asia→ Honda

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-4.jpg

When enter launch x431 Honda V46.40 software, it automatically pair the Bluetooth with car.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-5.jpg

Choose “16 PIN DLC” and it show Honda CRV car info.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-6.jpg

There are 4 options to choose:

Health report, is a full system scanning test and show lots of useful data.

System scan, maybe a basic scanning, haven’t click it.

System selection, select a single system to diagnose if know what’s wrong exactly.

Frequently used special function, like reset DPF, EPB, Service light, Battery registration, IMMO matching etc.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-7.jpg

Go to check the Health report and X431 Pro Mini diagnose this Honda CRV fully to 100%!

Electric powertrain, BCM, TPMS, ESP, ABS, SRS, etc.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-8.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-9.jpg

Also go to “System selection”, choose to diagnose Honda CRV engine system.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-10.jpg

Menu show many functions: read & clear DTC codes, ECM/PCM reset, read data stream, read freeze frame, actuation test and special function.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-11.jpg

X431 Pro Mini read Honda CRV engine DTC fault codes.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-12.jpg

X431 Pro Mini reset Honda CRV PCM/ECM OK.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/4-13.jpg

Tips: I bought Launch X431 Pro Mini from this trusted website:www.cnautotool.com

The obdstar company recently has released a OBDSTAR X300 DP key programmer.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-0.jpg

Here, engineers at CnAutotool.com wanna guide you how to use OBDSTAR X300 DP to erase a working key and program a new key.

About X300 DP obdstar:
There are two versions of this obdstar key programmer in the market:

Full package: Immobilizer + mileage adjustment + EEPROM/PIC adapter + OBDII + ABS + TPS + SRS reset + TPMS (low tire) reset+ Steering angle reset + CVT learning/Value reset + EPB + Oil service reset + Battery matching + Diagnosis(Japanese and Korean serials)

Standard package: Immobilizer + mileage adjustment + EEPROM/PIC adapter + OBDII

obdstar X300 DP pad clear a working key:

This is the working key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-1.jpg

Go to Diagnosis & Programming

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-2.jpg

Select the model:
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-3.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-4.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-5.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-6.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-7.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-8.jpg

Go to Immobilizer system for the GS model’s non-smart key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-9.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-10.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-11.jpg

Reading vin

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-12.jpg

Clear a key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-13.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-14.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-15.jpg

OBDSTAR X300 DP obdstar key programmer add a new key:

Go to program a key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-16.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-17.jpg

Enter pass

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-18.jpg
Program a key successfully

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-19.jpg

Test the new key on the car and verify it’s working.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-20.jpg

Done!

KTAG FW 7.020 vs. KTAG 7.003 vs. KTAG 6.070: Which new ECU?

This blog will totally make you clear:

What’s the difference KTAG FW 7.020 vs. KTAG 7.003 vs. KTAG 6.070? Which ECU types are newly supported?

Check below KTAG FW 7.020 Ksuite V2.23 screenshots!

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-1.jpg

In general, KTAG Firmware 7.020 add more than 100 ECU protocols newly supported.

Some screenshots of KTAG FW 7.020 Ksuite V2.23 new ECU protocols:

BDM 68K (CAT ADEM III, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-2.jpg

BDM HC12 (Continental Siemens VDO, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-3.jpg

BDM HC16 (DENSO 21175, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-4.jpg

BDM MPC5XX (BOSCH EDC16/16+, BOSCH EDC7, BOSCH ME9/9+, etc )

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-5.jpg

BOOTLOADER M32R (DENSO 21175, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-6.jpg

BOOTLOADER MITSUBISHI (MITSUBISHI 21175, MITSUBISHI E6T, MITSUBISHI E2T, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-7.jpg

BOOTLOADER ST10FXXX (BOSCH M7.4.4, BOSCH M7.9.7, BOSCH ME7.1.1, BOSCH ME7.4.4, BOSCH ME7.4.5, BOSCH ME7.9.10, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-8.jpg

BOOTLOADER TRICORE (BOSCH EDC17, BOSCH ME17, CONTINENTAL SID208, SIEMENS EMS2204, SIEMENS EMS3110, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-9.jpg

JTAG MPC5XXX (CONTINENTAL CM2150E, MARELLI 8DF, DELPHI DCM3.5, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-10.jpg

JTAG RENESAS (DELPHI DCM3.4, DELPHI DCM3.7, DENSO 32920, DENSO RA6, HITACHI A56, HITACHI MEC, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-11.jpg

NBD NEC 76F00XX (DENSO 175822 TOYOTA, DENSO 275036 TOYOTA, etc)

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-12.jpg

And KTAG Firmware 7.020 PCB Board for checking:
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-13.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/19-14.jpg

New OBDSTAR RFID Adapter for VAG 4th 5th IMMO Key Programming

OBDSTAR RFID Adapter for VW AUDI SKODA SEAT 4th and 5th generation immobilizer is newly rolled out in CnAutotool.com.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/14-1.jpg

Function:
For VAG group VW Audi Skoda Seat 4th & 5th IMMO key programming
Compatible Key Programmers:
OBDSTAR X300 DP (Key Master DP)
OBDSTAR DP PAD
OBDSTAR X300 Pro3 (Key Master)
OBDSTAR X100 Pro

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/14-2.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/14-3.jpg

Where to buy this adapter? Directly buy from:

http://www.cnautotool.com/goods-6534-OBDSTAR+RFID+Code+Reader+Adapter.html