obd2scantool.info

Launch X431,Autel Tools,Autoboss tools,Autocom CDP

Latest Posts

Digimaster 3 Function Menu

Digimaster 3 Function Menu

Digimaster 3 Connector Instruction
1     25 Pin adapter connector     8     15 Pin adapter connector
2     Mini USB Connector     9     Power adapter
3     USB Mouse Connector     10     switch
4     RJ45 LAN Connector     11     Power Indicator Light
5     Earphone Connector     12     Touch-Pen Connector
6     SD Card Connector     13     Keyboard
7     Microphone Connector     14     7 Inch LCD Touch-screen

Keystoke     Function Instruction
F1     Backspace
keyboard     open/close soft-keyboard
ESC     ESC
OK     Enter

Yanhua Digimaster 3 Function Menu

Digimaster 3 IMMO code reader is applicable for the following car models

Mileage Correction Digimaster 3 workable market and cars: Europe, America, Japan and Korea, Motor and Engineering truck

Digimaster 3 airbag resetting for the following brand cars

Digimaster 3 supports audio decoding for the following cars

OBD2 Scanner Digimaster 3 workable market

Digimaster 3 supportted European car list

Digimaster 3 supportted American car list

Digimaster 3 supportted Japanese and Korean car list

Digimaster iii support Motor type

Digimaster iii program keys for Mercedes Benz and support models

Digimaster iii make key for BMW and workable immobilizer type, D3 program ECU for BMW and
supported chip type

Digimaster iii-please select the operation type: File, IC Read, CPU Program and Signal Generator

Digimaster iii Dgiagnostic port read code

Digimaster iii supported Citroen type

How to update BMW ICOM firmware to V1.40?

http://www.cnautotool.com/images/201410/goods_img/4345_G_1414566433944.jpg

BMW diagnostic software firmware to V1.40 steps:

1.Download BMW ICOM V1.40 firmware update file

2. Please connect BMW ICOM A2 with computer using internet cable, power ICOM by 12V power adapter or from 1x DLC

3. Unzip ICOM FW v1.40 upgrade files.

4. Open IE Internet Explorer, enter address http://169.254.33.45:60080/ if you update Perfect version BMW ICOM, log in with

username: root

password: NZY1150263
PS: to upgrade common version ICOM A2 A1, browse http://169.254.92.38:60080/ and the next steps are the same.

6. Click “Update Firmware”, you will see ICOM firmware version information.

7. Click “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.

8. When it pops up “Write the image file to the flash?”, click “Yes”, then ICOM indicator light will turn red.

9. When it pops up “The SYSTEM IMAGE update was successful”, click “Update Firmware”.

10. Choose “ICOM-ApplicationImage-01-40-05.bin”, set image type as “APPLICATION”, click “Send the file”, it will spend several minutes since the file is a little bit large.

11. When it pops up “Write the image file to the flash?” click “Yes”, then the ICOM indicator light will turn red for the second times.

12. When it finish upgrading, click “reboot”.

13. Click “Home” – “Update Firmware”, you will find ICOM A2 firmware update to the newest version:
Current SYSTEM IMAGE version: 01.25.02
Current APPLICATION IMAGE version: 01.40.05

How to get the icarscan password if you forget it

How to get the ICarScan VCI password if you forget it? Forget the password ? Please check the steps how to find it back as following :

1.Run Icarscan APP “EZdiag

2.Click “Need Help?”at the bottom

3.Click “ Forget Password?”


4.Enter in your email address which you registered before, click “OK”,you will receive the email for the new password .

How to Confirm Our Autel Maxisys MS906 with 2 Years Update

How to Confirm Our Autel Maxisys MS906 with 2 Years Update

 

If you are the buyer who can not believe that our AUTEL MaxiSYS MS906 supports 2 years free update, you can register the AUTEL MaxiSYS MS906 to check the update time after you receive it.
How to register the AUTEL MaxiSYS MS906 diagnostic device
1. Visit the website: http://pro.autel.com.
2. On the Sign In page, input your account ID and other information to
log in, if you already have an account.
3. If you are a new member to Autel and do not have an account yet,
click the Create Autel ID button on the left side.
4. Enter   the   required   informotin  in  the  input  fields,  read  through
Autel’s  Terms  and  Conditions  and  tick  Angree,  and  then  click Create Autel ID at the bottom to continue.
5. The online system will automatically send a confirmation email to the
registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens.
6. s  serial  number  and  password  from  the  About
section of the Settings application on the display tablet.
7. Select  the  product  model  of  your  device,  enter  the  product  serial number and password on the Product Registration screen, and click Submit to complete the registration procedure.
8. Login My Account screen displays the comprehensive information of the user and  the  product,  which is synchronized with the on-line registered  account, including User Info, Device Info, Update Info and Service Info
9. Enter Update Info and you can find out the exact valid update time

How Can You Update Your Launch X431 V/V+/Pro With Small Fees

How Can You Update Your Launch X431 V/V+/Pro With Small Fees

 

All the Launch Scanner users know that the latest launch x431 diagnostic tools with dbscar connector is with only one year free update online. After one year, you need to pay a lot of update fee, for example, if you want to update your launch x431 pro or pad, you need to pay more than thousand dollars. The price is beyond your budget, but you really need the latest software. Where can you get the help on it? Is there any solution? Yes, you can visit cnautotool and search item number A221-1 LAUNCH X431 5C Wifi/Bluetooth Tabletand then place order directly. After you place order, please send us your launch x431 pro or pad clear sn photo. Then we will send you the latest software by email.
Can I get the latest update by email for my launch x431 pro3?
Yes, we can send you the latest update softwares by email for all launch x431 scan tools like Launch X431 V /V+/Diagun Iii/ Pro /Pro3/ Pros/ Pro3S/ PAD/5C. But please remember to send us the necessary sn photo. If the SN is not right, the software won’t be compatible with your hardware. LAUNCH X431 5C Wifi/Bluetooth Tablet is only 128USD. For details, welcome to check: http://www.cnautotool.com/goods-4584-The+Update+for+Launch+X431+V+Vdiagun+iii+pro+pro3+pros+pro3S+PAD5C.html

Best Obd2 Scanner Super Launch X431 Idiag With 100 Software

Launch x431 heavy duty Scanner Super Launch X431 Idiag With 100 Software

 

 

if you are looking for the best obd2 scanner for different vehicles recently, please do check our this new tool-Launch x431 heavy duty. It can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and full car system diagnose make it a professional automotive diagnostic tool. Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special functions etc; If the other brand diagnostic tools like Launch, Autel, Autoboss, Xtool, OBDStar ect are too expensive and you can not afford to it, do not hesitate to buy this super launch x431 idiag with only 188USD on cnautotool.
Launch x431 heavy dutyBluetooth Connector Vehicle List:
USA Car Software Bundle List:
E0BD,Buick,Cadillac,Chevrolet,Chrysler,Dodge,Fiat(Brazil),FORD,USAFORD,GM,GM(Brazil),Jeep,Lincoln
European Car Software Bundle List:
Abarth,Romeo,Audi,Bentley,BMW,Bugatti,Citroen,Dacia,Ferrari,Fiat,EURO Ford,GAZ,GMSA,Jaguar,Lancia, Landrover,Maserati,Maybach,Bugatti,Mini,Opel,Peugeot,Porsche,Renault,Rollsroyce,Rover, Saab,Seat,Skoda,Smart,Sprinter,Vauxhall,VAZ,Volvo,VW
Asia Car Software Bundle List:
Acura, Changan, ChangCheng, Daewoo, Daihatsu, Flyer, Australia Ford, Hafei, HaoQing, Holden, Honda, HuaChen, Hyundai, Infiniti, Isuzu, Jacty, Jiao, JinLong, JPIsuzu, Kia, Lexus, Luwei_TY, Mahindra, Maruti, Mazda, Mitsubishi, Nissan, Perodua, Proton, Qirui_TY, SSANGYONG, Subaru, Suzuki, Tata, TLIsuzu, Toyota, Xiali, ZhongShun, ZhongTai and ZhongXing.
Resetfuntion: Reserbms,Resetbrake,Reseroil,Resettpms,Resetets,Resetdpf,Resetbleed,Ecuaid,Resetgear

OurLaunch x431 heavy duty can be installed in any phone and tablet with Android system. There is detailed instruction in the package and easy to install. But it needs your phone or tablet is with extra spare space more than 2GB, otherwise it can not work normally. Anyway the more space, the better it can work. It can replace launch x431 IV,V,V+X431 Diagun 3,X431 PROand X431 PRO3,available for some 12V diesel cars. You can select different software language before ship.

MB SD C5 Star Diagnostic Tool Has Update Software 2016.09

MB STAR C5 Star Diagnostic Tool Has Update Software 2016.09

 

Our A358-3 MB STAR C5 Star Diagnostic Tool With Vediamo V05.00.06 Engineering Software Plus EVG7 Tablet PC Support Offline Program has latest update software now, it’s till 2016.09, welcome to visit cnautotool and buy it. The highlights for C5 is that it includes the Super Engineer Mode for Benz cars Vediamo, vediamocbf is 8.16GB. What’s the function for this software? It’s a diagnostic application for measurement analysis, control of actuators, DTC reading, activation of ECU functions, flashing, variant coding, parametrize and calibrate of ECUs, and for erecution of automated test sequences(Scripts).

New MB Compact 5 Features
1. New MB SD Connect Compact 5 Star Diagnosis support wireless diagnose;
2. New MB SD Connect Compact 5 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol.
Because old MB STAR C5 main board do not have UDS chip, so old MB STAR C5 can not support it;
3. Multiplexer now use Lan cable to connect
4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;
5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;

The software will be preinstalled in the EVG7 tablet for thisMB STAR C5, you can get it work directly after you receive it. But please note that you can not connect it to internet when you use it or can not update it, otherwise the software will be damaged at once. If you pay attention to it, the full set of c5 plus tablet including software will be your great assistant.

V2.11 KTAG BDM ECU Programming Tool Hardware V6.070

Here comes good news!! We released KTAG Programming Tool Master Hardware V6.070 recently.

Highlights of K-tag V2.11:
1.With Unlimited Tokens: V2.11 Ktag have a renew button, simply press this button, you can get more token freely and much more easily. No need to charge new tokens via j-link adapter as before.

2.ECU Picture and connection manual included in the newest software, after you choose car model, it will show you which cable to connect, and how to operate it step by step, much more easy to use

3. Work on more Vehicle(cars, trucks, bikes, boat and tractor) and ECU Type than old version

Detail information, please check Ktag Master ECU Tuning Kit Vehicle List and ECU List
4. Support BDM function, but do not support OBD communication, for that, you can check V2.10 Kess V2
5. With multi-language: English, Italian, German, French, Portuguese, Spanish

Here is video show you how to install Ktag Master V2.11

Update:
1. If you want to update your old Ktag(V1.89, 2.06) to Newest Version V2.11
2.You need to send the main unit of your old ktag back to us, the update cost is 370.00USD
3. As the hardware of Ktag V2.11(V6.070) and old Ktag(firmware v5.001) is not same, we are unable to update old ktag to newest version directly.
4. Our factory will recycle your old V5.001 firmware K-TAG programmer and change a brand new K-TAG ECU programmer with hardware V6.070 and software V2.11

FAQ / Solution of KESS V2 and KTAG

I try now to start a post where all the FAQ/solution about KESSV2 and Ktag can be found the people ask again and again.

Kess v2 vs Ktag
1.Ktag is able to work with Truck that Kess v2 can’t do.
2.Ktag read & write ECU via BDM, Kess v2 via OBD.
3.The newest ktag fw V6.070 is unlimited tokens and also newest KESS is.

Why do I buy KESS V2 and Ktag programmer together? (user review)

KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).

With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and  open it, after you can make the read/write operation.

Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.”

Kess:
Q: Where can I buy a good working clone from china?
A: This can’t be answered. Tools from China quality is most times 50:50 (50% good, 50% crap)
I bought from CnAutotool.com, it is not perfect, but do some it can do.

Q: I have fw 4.036 is it possible to read out the fw or to reflash the fw?
A: No it is not possible. You only can reset the token counter!

Q: I have fw 3.099 is it possible to read out, reflash or to update the fw?
A: Yes all is possible.

Q: How many Tokens do i have while using FW 4.036?
A: Every fw with fw 4.036 has 30 token

Q: My kess run out of token, what can i do now? Have i to replace the nxp?
A: No there is no need to replace the nxp. There are 3 solutions now: 1: vendor does reset by Teamviewer, 2: Customer can reset via Software, 3: There are vendor which offer the tool with reset button

Q: Would you recommand to buy a EU Clone?
A: Depends on your budget. EU clones are more expansive, but they use HQ Parts and are more stable. So it is your choice!

Q: Which is the newest version for clones available at the moment?
A: Newest version for clones is fw. 4.036

Q: Which version of ksuite shall I use for my fw. 4.036 clone?
A: You should use ksuite v2.08

Q: Why i can’t use newer Ksuite Version? Newer Version have newer cars!
A: There is no benefit to use higher version as v2.08. Fore sure newer ksuite version will support more cars, but for this you need also new fw!

Q: My tool is not working correct. Are there any information about which parts I have to change?
A: Please look at Kess v2 rework picture for reference.
15-1

Q: My nxp is blocked, where can buy a new one?
A: there are many places. You can buy for example on tme.eu the order number is LPC2478FBD208

Ktag:

Q: Does V6.070 K-TAG support Mercedes W211?

A: No. KTM100 FW: 7.003 support Mercedes-Benz W222 & BMW F chassis petrol, which K-TAG ECU Programming cannot do that.
Q: Where can I buy a good working clone from china?
A: This can’t be answered. Tools from China quality is most times 50:50 (50% good, 50% crap)
Again buy ktag from CnAutotool.com.

Q: I have fw 6.070 is it possible to read out the fw or to reflash the fw?
A: No it is not possible. You only can reset the token counter!

Q: I have fw 5.001 is it possible to read out the fw or to update the fw?
A: This depends on if your NXP is locked or not! It is 50:50 just try to read out your fw. If this will work you also can update!

Q: My ktag run out of token, what can i do now? Have i to replace the nxp?
A: No there is no need to replace the nxp. There are 3 solutions now: 1: vendor does reset by Teamviewer, 2: Customer can reset via Software, 3: There are vendor which offer the tool with reset button

Q: Would you recommand to buy a EU Clone?
A: Depends on your budget. EU clones are more expansive, but they use HQ Parts and are more stable. So it is your choice!

Q: Which is the newest version for clones available at the moment?
A: Newest version for clones is fw. 6.070

Q: Which version of ksuite shall I use for my fw. 6.070 clone?
A: You should use ksuite v2.11

Q: Why i can’t use newer Ksuite Version? Newer Version have newer cars!
A: There is no benefit to use higher version as v2.11. Fore sure newer ksuite version will support more cars, but for this you need also new fw!

Q: My tool is not working correct. Are there any information about which parts i have to change?
A: Please look at the rework picture as follows.
15-2

Q: My nxp is blocked, where can buy a new one?
A: there are many places. You can buy for example on tme.eu the order number is LPC2478FBD208

Why Ktag / Kess checksums error and how to prevent it happens

Why Ktag / Kess checksums error and how to prevent it happens
http://www.cnautotool.com/images/201411/thumb_img/4304_thumb_P_1415688979284.jpg
Some users feedback they have a same problem with KTAG Programming Tool Master and/or Kess v2 Master checksums error eg. the units will not calculate checksums when loading files. And this error happens on both Chinese clone Ktag/Kess and EU clone ones.
Then why Ktag / Kess checksums error and how to prevent it happens?
According to this ECU, you must do a full read and then straight after that you must do a full write. After you’ve done that, the ECU is open for you to load your tunes based on partial reads and writes. The reason for the full read and full write is that it takes off the tuning protection on the ECU.
The process is different for other ECUs I’d imagine.
2.13V Ktag Master V6.070 Plus V2.15 Kess V2 Unlimited Token V4.036 with Free ECM TITANIUM V1.61 Software:

http://www.cnautotool.com/goods-4304-K-TAG+ECU+Programming+Chip+Tuning+Tool+.html

2.13V Ktag Master V6.070 Plus V2.15 Kess V2 Unlimited Token V4.036 with Free ECM TITANIUM V1.61 Software
Who Views This Also Viewed:

1.KESS V2/KTAG Ksuite “External exception EEFFACE” error
2.My experience with Kess v2
3.kess v2 vs ktag vs MPPS V16
4.KTAG K-suite master clone mandatory update (fixed)
5.Kess v2 clone SD card replacement files to fix wake up error