Tag Archive: K518ISE Key Programmer

How to choose a BMW FEM Key Programmer for F-series FEM System

How TO identify what F series BMW is using CAS4 and what F series BMW use FEM?

FEM: 1 / x1 / 2 / 3 / 4 series
CAS4: X3 / X4 / 5 / 6 / 7 series

What a working tool to program Smart Key to F-series with FEM module?

1)

Yanhua BMW FEM Key Programmer:

1. Update Online

2. Supports offline operation, safe and stable, easy-to-use

3. Supports latest FEM system vehicles till 2017

4. No tokens needed
Yanhua BMW-FEM Key Programmer Support BMW F-chassis Car List:

1 Series             F20/F21                            2011-2017
2 Series             F22/F23/F45/F46            2014-2017
3 Series/GT       F34/F35                            2012-2017
4 Series             F30/F31/F32/F33/F36     2014-2017
X5                       F15                                     2014-2017
X6                       F16                                     2015-2017

2)

BMW Explorer since version 14.05.08 allows users to program ignition key for FEM / BDC

Key programming into FEM / BDC is divided into several stages
1 Preparation of FEM / BDC thru OBD
2 Preparation of FEM / BDC using programmer (Reading BACKUP)
3 Programming FEM / BDC with BMW-Explorer via OBD
4 Write back BACKUP with the programmer
5 Key programming thru OBD

Paragraph 1:
It is necessary to perform a quick test , go to the FEM / BDC and click the “Key learning” button,
The program will check for a supported version of the unit, prepare the unit for the next procedure, and will display the message “Read Eeprom and upload in calc“.

Paragraph 2:
Remove the FEM / BDC unit as described HERE. Disassemble the FEM / BDC unit as described in THIS SECTION.
Read 95128/95256 Eeprom (pictured in the upper right corner) using programmer
(Orange Xprog or others that supports Eeprom 95128/95256).
Download Eeprom into BMW-Explorer, and save EEprom and write it back into the FEM / BDC.

Paragraph 3:
Install the unit on the car in the reverse order of removal, and connect BMW-Explorer via OBD.
The car probably will not respond to the key, do not get scared!
Connect to FEM, press “Reset mileage”, Explorer will propose to program the FEM / BDC, agree and wait for the programming to finish.
After successful programming, the program will write to you “Return the saved original Eeprom”, then remove FEM again and using programmer, return the previously read contents of EEprom 95128/95256. Then you can install the unit back to the car.

Sometimes it is possible that after the last manipulation the FEM / BDC will stop responding to the diagnostics, then you need to flash this EEprom into the unit and program the unit with Esys or ISTA-P and start the unit preparation from step 1.
P.S: Follow the instructions and save your time.

Paragraph 4:
Connect to the FEM / BDC control unit using the BMW-explorer, press “Extra options” then “Key learning”. Key programming window will open and will read the key data we need for programming.
If you have a working key, then you need to bring it to the emergency coil as pictured below and press the “Read crypto key” button.
About successful reading of the “Crypto” BMW-Explorer show “Crypto Ok” message.
If you do not have a working key, then you need to read the ISN from the DME and enter it into the “ISN from DME” window.
You can also enter 8 bytes of the “crypto” manually.
Now you can start to learn keys. To do this we must select a free track for the key and press “Learn key”, bring a new key to the emergency coil on the steering column.

Here is a video demo guide on 2015 BMW 328 F34 FEM key Programming by using BMW Explorer.

3):

Xhorse VVDI2 key programmer to cover FEM+bdc key programming adding on all BMW Fxx series after version  V4.3.0 authorization to be offered.

Here is the step-by-step instruction on using VVDI2 to program BMW/BDC keys.

How to use VVDI2 for BMW FEM/BDC programming

4) CGDI Prog BMW MSV80 Key Programmer

FEM/BDC key programmer function is added to CGDI Prog key programmer (Aug. 2017)! Now the device supports BMW CAS1,CAS2,CAS3 CAS4 /CAS 4+/FEM/BDC key programming/all keys lost , you can pay 175USD for the FEM/BDC authorization.

k518-bmw-fem-1

5) Lonsdor K518ISE key programmer

Lonsdor K518ISE adds BMW FEM/BDC system key programming for FREE on October 27, 2017.

k518-bmw-fem-2

How to Solve K518 program Renault primastar 2004 key ok but not start van

Lonsdor K518ISE:Renault primastar 2004 – program key all went OK, but after finished the key would not start van, or work with central locking.

2x keys tested, both from AUTOWAVE company. keys were LOCKED after programming.

Programmed under Renault trafic first, then Renault master second key used.

Maybe it was faulty keys, I don’t know, autowave keys are usually good.

Analysis:

ISK (Crypto low, Crypto high) = is the 6 byte in HITAG2 which close the pcf (like a password) if you have cloning stuff you can see the ISK after key decoding, like Handy or something or some tools are informing you like Renault ECu tool. Whatever, you got the ISK
Take your transponder programmer and enter the isk. Put the locked key to the programmer, it depends the prommer there is a different ways but you can always unlock Renault hitag2 keys or cards(7946, 7947) if you have the ISK.
And yes even the EFFI able to do it, my miraclone have a dedicated button..etc.
When I programming Renault I always writing down the ISK. If the key is broken/defected/something I can start over after unlock.

In addition, the only key you can’t unlock if you know ISK is the new Renault card for Meganne. 2. If order by official dealer card come locked with Vin you order and can’t unlock with any way.

Lonsdor K518ise key programmer add non-smart keys to Renault Clio 3

Confirmed! Lonsdor K518ISE Key Programmer is able to add non-smart keys to Renault Clio 3

In Lonsdor K518ise:

Immobilizer – Renault – select from vehicle – Clio – Clio 3

lonsdor-k518ise-renault-clio-1

Add non-smart keys

lonsdor-k518ise-renault-clio-2

Downloading application…

lonsdor-k518ise-renault-clio-3

Lonsdor starts programming new keys…

Turn off the ignition switch and remove the key

lonsdor-k518ise-renault-clio-4

Current key: 2

lonsdor-k518ise-renault-clio-5 lonsdor-k518ise-renault-clio-6
Insert the key and switch ignition on

lonsdor-k518ise-renault-clio-7

Switch ignition off, remove the key

lonsdor-k518ise-renault-clio-8

Insert the key and switch ignition on

lonsdor-k518ise-renault-clio-9

Switch ignition off, remove the key

lonsdor-k518ise-renault-clio-10

Continue to program the next key

lonsdor-k518ise-renault-clio-11

Key learn complete

lonsdor-k518ise-renault-clio-12

Test both keys

lonsdor-k518ise-renault-clio-13 lonsdor-k518ise-renault-clio-14

Peugeot 407 2007 read pin & program keys by Lonsdor K518ISE

Possible to program remotes (Peugeot 407 2007) using Lonsdor?

Yep! it’s tested. Lonsdor K518ISE is able to read pin codes and program new keys and remotes to 407.

The test: (done by engineers working for cardiagtool.co.uk)

step 1: read pin

step 2: add new keys

step 3: program remotes

in detail…

Step 1: Read Pin Code

Select- Peugeot-1 Select- Peugeot-2 Select- Peugeot-3
During the function operation, the windshield wiper brushes and the headlight illuminates which is normal
To stop wiper brush, check Help and pull out the corresponding fuse.

Turn ignition switch to ON position

Select- Peugeot-4

Lonsdor is gonnna to read vehicle information

Select- Peugeot-5

Reading data and verifying pin

Read pin code success

Step 2: Program a new key

Select Peugeot->Select from vehicle->407->Immobilizer->Program key

Select- Peugeot-6 Select- Peugeot-7

Turn on ignition

Select- Peugeot-8

require to enter pin to access

Select- Peugeot-9

Turn ignition off and then turn on within 15 seconds

Select- Peugeot-10

Program complete.

Press YES to program next key or Cancel to quit.

Step 3: Program the remote control

Select- Peugeot-12

Step to reprogram remote control:
1.Switch ignition off and remove key
2. Insert a key and switch ignition on
3. Press any button of the remote key for 10 seconds and release within 20 seconds.
4. Switch ignition off and remove key
5. For more keys, repeat step 2-4

Select- Peugeot-13

Job’s done!

Result: success!

Lonsdor K518ISE programs 2005 Ford Focus key in two minutes

A quick demonstration of Lonsdor K518ISE programming key for 2005 Ford Focus in two minutes. And for more auto key programming,check hereautomotive key programming cases.
lonsdor-k518ise-key-programming-on-a-ford-focus-1
This is the Ford with this key the HP 100 101, sorry not the Tibbe key.
lonsdor-k518ise-key-programming-on-a-ford-focus-2
lonsdor-k518ise-key-programming-on-a-ford-focus-3
It’s very simple to use Car Key Programmer Lonsdor K518ISE.
You see there is a range of other things but we’re just doing this key today.
lonsdor-k518ise-key-programming-on-a-ford-focus-4
So just show you the original key is this one and when you put that in the ignition, turn the ignition on and this light here that’s currently, flashing will go solid and then go out that shows that the system’s working.
lonsdor-k518ise-key-programming-on-a-ford-focus-5
lonsdor-k518ise-key-programming-on-a-ford-focus-6
The new key is this one, it’s been cut ready, switch the ignition on and you see that light goes just flash basically, so it’s not programmed yet.
lonsdor-k518ise-key-programming-on-a-ford-focus-7
lonsdor-k518ise-key-programming-on-a-ford-focus-8
So, go to “Immobilizer“.
lonsdor-k518ise-key-programming-on-a-ford-focus-9
There is a nice search function at the right corner of the machine.
Type F and choose “Ford”, then “China”.
Yes, it does say China, but I’ve tested it quite a few times there’s name of Europe, South America, and anything else, it’s just China here, but it does work under that, so we are gonna go for China.
lonsdor-k518ise-key-programming-on-a-ford-focus-10 lonsdor-k518ise-key-programming-on-a-ford-focus-11 lonsdor-k518ise-key-programming-on-a-ford-focus-12 lonsdor-k518ise-key-programming-on-a-ford-focus-13 lonsdor-k518ise-key-programming-on-a-ford-focus-14
We will see that years the classic focus’s, tap “Type 2”, then “Immobilizer”.
Tap “Add key”, then get message “Downloading application”.
lonsdor-k518ise-key-programming-on-a-ford-focus-15 lonsdor-k518ise-key-programming-on-a-ford-focus-16 lonsdor-k518ise-key-programming-on-a-ford-focus-17
Read message ” Connect device (Lonsdor K518) OBD test cable with the vehicle OBD port, switch ignition one.”, tap “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-18 lonsdor-k518ise-key-programming-on-a-ford-focus-19
Please insert the new key to be programmed. Note: It needs two right keys to start vehicle.
So we are in a certain new key to be programmed which is this new one here, so press “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-20 lonsdor-k518ise-key-programming-on-a-ford-focus-21
Identified number of programmed keys in car:2, select “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-22
Programming, please wait…
lonsdor-k518ise-key-programming-on-a-ford-focus-23
Programming complete, successfully programmed key count (2).
lonsdor-k518ise-key-programming-on-a-ford-focus-24
So I’m going to test out because that should have jumped up to free rarely.
Just ignition on, insert back to see if the light goes solid and goes out.
So that’s goes solid and goes out, the key is programmed.
lonsdor-k518ise-key-programming-on-a-ford-focus-25

lonsdor-k518ise-key-programming-on-a-ford-focus-26

And going to check another one, insert into the ignition and to see if the light goes solid and goes out, then the key is programmed successfully.
So they both work. So when it says keys programmed to it must have meant the new key count will be too, so there must have just been just this one key programmed at the time and the other key is gonna be this one the new one. To me that should say free, but it works, the both start the car. So we’re gonna do is pop the key in just test it turn the ignition on, might go solid and goes out, means it’s gonna work it’s a neutral, start the car.
So Lonsdor K518 programmer takes literally less than two minutes to program the key.
lonsdor-k518ise-key-programming-on-a-ford-focus-27 lonsdor-k518ise-key-programming-on-a-ford-focus-28 lonsdor-k518ise-key-programming-on-a-ford-focus-29
CnAutotool.com Official Blog All rights reserved Lonsdor K518ISE programs 2005 Ford Focus key in two minutes

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014

Used to read pin codes for 2014 Jeep Grand Cherokee using Lonsdor K518ISE.

But now i cannot read the pin.

this is the version able to read pin from Grand Cherokee

l(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -1

but now it cannot…

forced to update sw

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -2

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -3

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -4

nothing changed

the machine device info (id, sn)

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -4 (Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -5 (Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -6

i check alk immo0

nothing as smart 453

immo4 immo5 all
(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -6

go to the trial apply in the main interface

Trial apply it’s only 90 days

so, now, everything is clear.

In Lonsdor K518S, menus are divided into two parts:

free menus and subscribed menus.

Free menus are free for lifetime.
Subscribed menus can be used for free for 90 days.

You need to pay for them after the trial period. After the trial period, subscribed menus will not work properly if you don’t pay. And the menus will disappear after updating the device.
A. 365 days is a period and the price is USD600 per period. One year period starts from the day of the trial period finished.
B. Purchase menus with a dealer. You can use the menus normally and permanently after payment.
C. Menus which you purchase includes subscribed menus that have been released and that will have been released in one year period.
D. Subscribed menus beyond one year period requires extra payment.

after 90 days’ trial period, click check for updates in one key update, you can use subscribed menus for an extra 90-day period

 

Lonsdor K518ISE Key programmer Test Results

 Lonsdor K518ISE Key programmer Test Results: after 90 days free trial update

Lonsdor K518ISE Key Programmer is tested by users 95.5% working fine after 90 days free trial update, it can work fine on an increasing number of car models. Here list some.

1. New 3 month trial period for certain special function.

I used it for Megane 3 with Smart Card system. The programmed key card in 2 minutes. No need pin code or anything…
Seems they have finally got a good competition for the Zedfull…..

2. Mégane 3 RS 2010, 4 buttons card, hands-free. Cards programmed 2 mins, Starts/stops, opens/closes, and the hands-free works too with factory cards

3. Fiat Doblo 2017. Program key ok And disabled key lost
Honda Accord 2012. Add key ok

4. Renault master3 2012 add key ok

5. BMW 1 F25 2012 fem add Key ok

6. Read pin add key Peugeot 208 2014 ok

7. Mazda cx9 2015 add key 4d-63 80bit ok

8. -Renault espace 2008 added 2 smart cards with no error, after finished the 2 cards were not recognized did not start car or work central locking

took long while, 5 minutes per card, MVP coded all cards in under 30 seconds, working perfectly…

9. – I made cas 2 one week ago no problem at all i made key in slot off lonsdor max 5 min

10. -Personally I never had issue with BMW cas 2/3 with lonsdor

11. – Volvo v50 2005 add key and remote ok

12. -Good news !! New update is good for MQB key !! Work fine add key on golf mk7 2015 ! Very fast and easy !!! Bravo !!

13. Mitsubishi space wagon 2003, precoded id61 and programmed key ok.

14. Corsa E (2016) read PIN (BCM) = OK

16. VW Amarok 2016 add key ok and backup EEPROM

17. FIAT 500 2008 Read Pin code and prepare remote key than program. ALL FINE

18. I have start loving this toy when i bought it was working 20% ok 80% not Now it is 95 – 5. Today megane 3 year 2009 keyless key made job in 2minutes

19. Porche Panamera 2010 km adjust obd job done

20. hyunday i20 2015 year
read pin ok
add key ok

21. Citroën c5 2008 read pin add key ok
307 Kline read pin fail/add key ok

22. 206 kline all key lost read pin ok about 3sec
23. Opel Zafira b read pin add key
24. Touran 2006 learn key and remote ok

25. Zafira B, read pin and add key, – Success (note, this failed under Zafira B in menu, but i chose type 3 from by system for both pin read and program and works fine)

26. Peugeot 607 2006 abrites won’t connect with BSI to read pin and key learning too.
Lonsdor read pin and program key 2 min.

27. Renault Fluence 2015 keyless go works excellent, in fact, zed full asks for pin and Lonsdor doesn’t. The key works ok in central module and keyless go,5 min job.

28. Suzuki Swift 2015-> (pcf7961)
all key lost
Program without pin – OK (2min)

29. Ford focus 2006 year
add key (all key lost) work all ok

30. Suzuki Swift 2013 all key lost – OK

31. Ford kuga smart spare key….ok, max 5min job

32. i30 2009 all key lost pin i key(7936) ok

33. grand Cherokee 2014 add smart ok

34. Lonsdor K518 Jeep Grand Cherokee 2015 Smart Key programming definetely. Read eeprom, calculate pin code OK.

35. Berlingo 2014 all key lost pin read ok

36. Fiesta 2013 keyless ok

37. Mazda 3 2014 add Smart key OK. All keys lost also OK.
I20 2014, read pin without working key and program key OK.

38. 2012 Ford Transit T350 2.2 RWD

AKL ok

Add Keys ok

39. Today Megane 3 year 2009 keyless key made job in 2 minutes.

Lonsdor K518ISE Key programmer FAQ:
Q: hmmm, i suppose i should update, seems like some new features are cropping up,
A: You need update and activate trial version for show new functions for 90 days. If you not activate trial version news functions not visible.

Q: What does trial for 90 data means?
A: for coverage in red color, after 90 days if you want still to use that coverage it will be paid option

Information about subscription update for a year: 600$

I’m planning to buy, but now this will be ban.

Q: Bmw X5 cas3+ the year 2008 add key not successful read ok all , but was not able to add key , ZedFull add in 1 min .
A: you must add it with key in ignition, in slot doesn’t work ok, but with key in ignition should work. tested by me

Lonsdor K518ISE Update Immobilization of American Vehicles

Lonsdor K518ISE Update Immobilization of American Vehicles on May.3, 2018.

FORD

FORD\Remote System

LINCOLN

LINCOLN\Navigator\Remote System

HUMMER

HUMMER\H2\Remote Programming\Type2\2008-2009

HUMMER\H2\Remote Programming Method\2003-2007

HUMMER\H2\Remote Programming Method\2008-2009

DODGE

DODGE\Mechanical Key\Type\Type1(CAN)

DODGE\Mechanical Key\Type\Type2(CAN)

DODGE\Mechanical Key\Type\Type3(CAN)

DODGE\Mechanical Key\Type\Type4(CAN)

DODGE\Mechanical Key\Type\Type5(CAN)

DODGE\Mechanical Key\Type\Type6(VPW)

DODGE\Smart Key\Type\Type1(CAN)

DODGE\Smart Key\Type\Type2(CAN)

DODGE\Smart Key\Vehicle Type\Challenger\2015-

DODGE\Smart Key\Vehicle Type\Charger\2011-

DODGE\Smart Key\Vehicle Type\Dart\2013-\Half Smart

DODGE\Smart Key\Vehicle Type\Dart\2013-\Smart

DODGE\Smart Key\Vehicle Type\Magnum\2011-

DODGE\Smart Key\Vehicle Type\Viper\2013-

DODGE\Remote\Type\Type1

DODGE\Remote\Type\Type2(VPW)

DODGE\Remote\Type\Type3(VPW)

DODGE\Remote\Type\Type4(CAN)

DODGE\Remote\Type\Type5

DODGE\Remote\Type\Type6

DODGE\Remote\Type\Type7

DODGE\Remote\Type\Type8

DODGE\Remote\Vehicle Type\Caravan\2001-2003\Remote Programming

DODGE\Remote\Vehicle Type\Dakota\2001-2004\Remote Programming

DODGE\Remote\Vehicle Type\Durango\2001-2003\Remote Programming

DODGE\Remote\Vehicle Type\Intrepid\1998-2004\Remote Programming

DODGE\Remote\Vehicle Type\Neon\2000-2005\Remote Programming

DODGE\Remote\Vehicle Type\Ram\2002-2005\Remote Programming

DODGE\Remote\Vehicle Type\Startus\4 door\2001-2006\Remote Programming

CHRYSLER

CHRYSLER\Select from System\Remote\Type1

CHRYSLER\Select from System\Remote\Type5

CHRYSLER\Select from System\Remote\Type6

CHRYSLER\Select from System\Remote\Type7

CHRYSLER\Select from System\Remote\Type8

CHRYSLER\Vehicle Type \Smart Key\200\2015-

CHRYSLER\Vehicle Type\Smart Key\300\2011-

CHRYSLER\Vehicle Type\Smart Key\Freemont\2011-

CHRYSLER\Vehicle Type\Remote\300M\1999-2000

CHRYSLER\Vehicle Type\Remote\Concorde\1998-2004

CHRYSLER\Vehicle Type\Remote\LHS\1999-2001

CHRYSLER\Vehicle Type\Remote\PT cruiser\2001-2005

CHRYSLER\Vehicle Type\Remote\Sebring\2001-2006

CHRYSLER\Vehicle Type\Remote\Town&Country\2001-2003

BUICK

BUICK\Excelle\2017-\Immobilizer

CADILLAC

CADILLAC\ATSL\2015-2016\Smart Key Immobilizer\Type2

CADILLAC\SRX\2010-2014\Smart Key Immobilizer\Type2

CHEVROLET

CHEVROLET\Cavalier\Immobilizer

www.cnautotool.com

Lonsdor K518ISE update error abnormal machine and try to restore

One customer feedback: when he tried to update Lonsdor K518ISE Key Programmer, he got error: “The machine is abnormal, try to restore, scm file lost” shown as bellow.

9-1

Solution:

1.  Press the “Settings” button and “Back” button at the same time.

9-2

2.  Uninstall the current APK until you see “APK is uninstalled successfully”.

9-3
9-4

3.  Tap “Online update (New), you can tap the circle to check if there is newest updates.

9-5
9-6

4.  Install and it will take you a longer time, during this waiting process you can do something else. After installation complete, reboot the machine and you are asked to set the WIFI and tap the “Update” option, if the update failure, change another Wifi or refer to the WIFI settings file to change domain name.

If you get the same prompts shown as below, then please follow the below guide to operate Auto key Programmer.

1). Tap “Fault repair”.

9-7

2). Get message “This operation will delete APK related data and reinstall, are you sure to go on?”

Tap “Yes”.

9-8

3). Tap “Factory reset”.

9-9
4). Install complete, tap “Back”.

9-10

5). Tap “Start the application”.

9-11

6). Please enter 6-digit power-on password.

9-12

7). Tap “Update”.

9-13

Done.

Lonsdor K518ISE Key Programmer Maintenance

19-1

This Post is about OBD2 Scanner Lonsdor K518ISE  Key Programmer Maintenance, please read it carefully, they can help your K518 key programmer in good working efficient and has long service life.

K518ISE Main Unit Maintenance:

1. Place the equipment and accessories in a place where children are not accessible.
2.Keep the equipment in dry and good ventilated environment. Do not use chemicals,
detergents or water to clean the equipment, and avoid rain, moisture or liquid contained
minerals to corrosion electronic circuit boards.
3.Do not store the equipment in over hot/cold place as it will shorten the lifespan of
electronic devices and damage the battery, the temperature range required: low
temperature (-10 ± 3) ℃, high temperature (55 ± 3) ℃.
4.Please do not disassemble the equipment personally, shall you have any problem,please contact
after-sales service or the certified dealer.
5.Do not throw, knock or strongly vibrate the device, it will damage the internal circuit board.
6.If the equipment is in water, make sure it is disconnected and should not be
disassembled personally. Do not use any heating equipment (dryer, microwave oven,
etc.) to dry. Please send the device to local dealer for inspection.
7.After a long time use, such as during working state, long charge, connect OBD to
diagnose, the device may become a slight fever, this is a normal, please do not worry.
8.The device has a built-in antenna, please do not damage or modify the antenna
without authorization, to avoid performance degradation of the device and the SAR value
exceeds the recommended range. As the antenna position will affect antenna performance,
resulting in equipment transmission power in an unstable state, so please try to avoid
holding the antenna area (upper right corner).
9. Do not place heavy objects on the device or squeeze vigorously, to avoid device
damage or display screen distortion.

Auto Key Programmer K518ISE Battery Maintenance:

1.When the device is in start state, please do not remove or maintain the battery. The
inside polymer lithium battery, if not handled properly, may run the risk of fire or burning
itself.
2.Please do not disassemble the battery, do external short-circuit contact, or expose the
battery at excessively high or low temperature (-10°C~55°C as suggested), and do not
dispose battery in fire or as normal waste.
3.Please be careful to keep the battery dry and away from water or other liquids, to avoid
short circuit. If soaked, please do not start the device or remove the battery without
direction.