Tag Archive: MDI Interface

Configure the Wireless Interface for GM MDI

GM MDI is a multiple wireless diagnostic interface with WIFI, which can be used to perform Pass-Thru programming on almost all vehicles (1996-now). It is one of reputable diagnosis in the markets; meanwhile, users encounter all kinds of problem, like configuring the wireless interface (one of typical problems). And here eobdtool.co.uk technicians offer some possible solutions.
–How to configure the Wireless interface?
· Connect to MDI with USB connection.
· Update the MDI firmware if required
· From the MDI explorer TAB, select the MDI and press the connect button.
· Select the Network Setup TAB.
· Select the ‘Enable Wireless Interface’ box in the Network Setup TAB.
· If using Dynamic IP addresses (DHCP) select the ‘Obtain an IP address automatically’ box.
· If using Static IP address:
o If connecting to the dealer network contact your IT/Network Administrator for IP
settings.
o Select the ‘Use the following IP address’ box.
o Enter the IP address to be used.
o Enter the appropriate Subnet mask.
· Select ‘Access Point’.
· Select ‘Refresh’ to list the SSID’s of the ‘in range’ Access Points available.

Configure-the-Wireless-Interface-for-GM-MDI-1

· If the SSID of the Access Point is not broadcast or is not in range may be entered manually
by selecting ‘Enter Network Name’ and entering the SSID.
· Select ‘Configure’ and enter the Access Point security information. Select ‘Next’.

Configure-the-Wireless-Interface-for-GM-MDI-2

· Select ‘Apply’.
· Verify settings in Properties tab.
· Signal Quality (fair, good, excellent) indicates the MDI has connected to AP.
· From MDI explorer TAB, select disconnect.
· Unplug the USB connector from the MDI.
· Unplug the wired Ethernet connector from the MDI if present.
· If the Car Diagnostic Tool MDI, PC and AP are configured properly, the MDI should still appear in the MDI
explorer.
· Select Connect
–When configuring a Wireless interface for the MDI, which authentication and encryption level should be used?
It is necessary to access the AP/Router in order to determine these settings. It some cases you
are required to contact your IT/Network Administrator for this information. Authentication and
encryption level settings are dependent on the Access Point/Router security settings.
–How do I disable the Wireless interface?
· Connect to MDI with USB connection.

· Deselect the ‘Enable Wireless Interface’ box in the Network Setup tab.

Gm mdi scan tool software installation well with laptop ready to use

If you ready to buy GM MDI Scan Tool and feel it is difficult to install software.  this is a good news for you .we  can  install the gm mdi software well for you.  when you received the  goods, you can use it directly . save money and time.  we also provide technology  support . best aftermarket service

after  you received the GM MDI Scanner. you need to connect it with vehicles. following picture show you how to connect with vehicles.

24-1

24-2

this gm mdi not need battery. When you use it, connect this device with your car, car will provide the power for this GM MDI. And use it to diagnose and code the car.

GM MDI software including GlobalTIS, opeltis, gds2, techwin etc. see in the pictures

24-3

if you buy the gm mdi with laptop together. we will install the software well, when you use this device again, it will prompt the hardware is low, you need to update, then just click update is ok.

GM MDI support multi-language. it is convince for you.

24-4

Professional automotive diagnostic tool Gm MDI support GM cars 1990-2013, support Opel model before 2013 year , Holden around 2010 and more vehicles.

gm mdi is work better than gm tech2 diagnostic tool. GM MDI from CnAutotool is newer scanner for new GM models, while Tech2 scan tool is for old models.

Following is the GM MDI product provided by CnAutotool.

1.GM MDI Scan tool Plus EVG7 Tablet PC V2017.09 Software – $758

23-1

2.GM MDI GM Scan tool V2017.09 Plus Lenovo E49AL Laptop Full Set Ready To Use High Quality – $499

23-2

3.Best Price MDI for GM Scan Tool – $148

24-7

4.Best quality MDI for GM Scan Tool – $238

24-8