Tag Archive: Renault CAN Clip Diagnostic Interface

Renault CAN CLiP v166 download link, which is working?

There are many Renault can clip v166 software download links online. Anyone tested it? Which one works OK?

CAN CLiP v166 download on Mega:

https://mega.nz/#!7cBVCSiS!SR_FluwN1PWoYc1KFp8vL7sAhMDAGfr8m1u1JxUfobY

Anyone has experience of it? safe to use?

No! Renault CAN CLiP v166 software is only offered online, but professionals haven’t tested them yet. So, probably, you are taking risks with CLIP above.

So, where to get a working CAN CLIP for Renault?

Usually, you had better spend some pennies (with 10euro) to get a tested CAN CLIP Renault software at www.cnautotool.com. You can Google “renault can clip download”; there are many sites available, like cardiagtool.co.uk. Renault diagnostic software there is crack, no pass, never expire, and working great with CAN CLIP diagnostic interface china clones.

What should you pay attention to if you decide to buy items from China?

Tip 1: Quality & Price

In China, you can get anything – at/for any price, problem is that you will have to accept the quality. “You get what you pay for” – And this is more or less true, there will be always someone somewhere “trying to” do it for less, but there are thresholds and once you step under them, you will have to suffer from the results. Quality of a product also depends on the material you purchase (You can’t simply make gold out of wood)

Tip 2: Reasons for low costs

The only reason why the obdii diagnostic cables are made in China is because 90% of the materials (micro-controllers and ICs) come from there. That is, it’s mainly about cost, most people would not be ready to pay 3-4 times the price just for the device being made in Europe or the US.

So, items are produced in high quantity and cost saving here

Good luck with china clones! And have fun!

Renault CAN CLIP V168 Test Report: Success!

V168 CAN Clip for Renault diagnostic software has been tested to work without any issue!

Purpose: This write-up explains how RenaultCLiP V168 works successfully!

Overview: About Renault Can Clip. You do not need to postpone your trip because of reprogramming or airbag issues that your Renault car is facing. With Renault CAN clip, you can scan and diagnose different problems that you car may have before a long trip.

Test scope:
– In Scope
– Out of Scope

A functionality verification which needs connectivity to a third party application cannot be tested, as the connectivity could not be established due to some technical limitations. This section should be clearly documented, else it will be assumed that Testing covered all areas of the application.

a) In Scope
Functional Testing for the following modules are in Scope of Testing
·Functions tested: OBDII diagnosis, ECU reprogramming.
·Systems tested: ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I, etc.

b) Out of Scope
Performance Testing was not done for this application.
·Renault can clip key programming
·Renault can clip ECU programming

Note: you can try FVDI2Renault or Renault-COM for programming.

Metrics:
A) No. of test cases planned vs executed
b) No. of test cases passed/failed
http://forobd2tool.com/wp-content/uploads/2017/06/22/14-1.jpg

Test environment and tools:
http://forobd2tool.com/wp-content/uploads/2017/06/22/14-2.jpg

Lessons Learned:
– Issues faced:
Connected to the car and four lights are lit Prompted for this content: 5800 window, units of measurement appear 104 Error 5800: Please check the power supply is connected, the normal connection indicator light red flashes. If it is any problem of these two situations: reconnect, wait about 10 seconds before verification.

– Solutions:
1) The installed software can’t run in your computer system stably, there is no communication between the software and the device.
2) The computer USB interface does not work, try to use another one.