Tag Archive: Tango key programmer

Program Mitsubishi Pajero Sport 2013 All key lost

Mitsubishi Pajero Sport 2013 all key lost programming guide is provided by www.cnautotool.com below.

30-1

Remote:

program remote by Car Key Programmer KD900 remote maker, then directly generate remote with Xtool X300 auto key programmer.

Chip:

Try to read key chip data with XTOOL X300+, if failed to read it. Then disassemble the immo box.
30-2

30-3

Open the immo box,find out eight-foot chip  S25A32 , see picture below

30-4
Read chip S25A32 data with Xhorse VVDI Prog programmer or D3, select 25320 to read and then save data.

30-5

Open Tango software, upload the data just read by VVDI-Prog
30-6

Use common ID46 chip to write key. Tango Key Programmer will automatically re-write key data to S25A32 8 foot chip.
30-7

Tested the newly programmed remote.

Done.

Precode PCF7947 for Laguna 2 button key card with Zed Bull

Here is little guide on pre-coding new PCF7947 for Renault Laguna two button key card with cloned Zed Bull transponder Car Key Programmer.

Instruction:

After replacing the transponder PCF7947 need to be precoding remote control to work properly. You can do this with expensive equipment – TP2, Tango transponder key programmer, or the original ZedBull.
But here’s a way how to do it with Zed Bull V508 cloned.

1. PCF7947 new mount in the card. Then go to HITAG2 buton in ZedBull software.
2. In the menu select PCF7946 and press the button: “READ ALL PAGES”
3. In section “TRANSPONDER ” in the third page, change the bytes as shown in the picture.
4. The same way you do in the “REMONTE” section.
5. Press the buttons: W3, W4, W5, W6, W7
6. The card is ready to be programmed in the car.

25-1

Description is designed for two button key card Laguna 2 2001-2005.

Gives only solution tested by jaca4591 from DK.

Additional information:
Here are the hitag2 pages from a genuine new renault megane 3 button card note page 7 is 00000000 i programmed this to the car all ok,i think page 7 changes with every press of the buttons for the rolling code.

25-2
Clio3 3 button key.
25-3

one button remote control for a clio II
25-4

Here are pages for a Renault 1 Button genuine key
25-5

Xhorse VVDI2 Get ISN code from BMW CAS3+ by OBD

Here is little tutorial on getting ISN from BMW CAS3+ encrypted file with Xhorse VVDI2 BMW key programmer for all keys lost.

Tool required:

VVDI Prog or R270 programmer (Read CAS3+ encrypted file)

VVDI2 BMW with latest software version (read ISN)

Tango Key Programmer (program key)

Guide:

Open VVDI2 software, select Auto Detect

Select Key Learn tab-> File Make Key

20-1

Select CAS3+ (0L15Y,0M23S)

20-2

Click Load EEPROM dump file
20-3
upload dump read by VVDI programmer

VVDI2 will display vehicle information, VIN, KM, key cutting code etc
20-2

Select Key position: KeyID1

Click on Make Dealer Key

20-4

Select “Use try start method to start engine, no need working key or original dump file”, click on Next

Xhorse VVDI2 prompts lost all working key you will gave 64 attempts, do you want to continue, click on YES

20-5

Do you already make new key at key 1?
If already made new key (Already saved new EEPROM dump), press YES

Please use current key to start the engine, if start success press YES, else No
If cannot start engine, please take out the key and insert to programmer before press NO
Is the engine start now?

Click Yes to continue
20-6

Then VVDI2 BMW will display CAS3+ ISN, copy the ISN code

Open Tango transponder key programmer software
20-7

Select Car Model->BMW->Cars->CAS 1-3

Click on upload dump icon to load the eeprom dump
20-8

CAS3+ Detected

To decrypt data the valid key is necessary or ECU dump

Press OK

20-9

Select having a key, DME dump or DME ISN. In this situation, we select “I have DME ISN”

Tick OK

20-10

Paste the ISN got by VVDI2 here

20-11

Press OK

Program transponder with tango.
20-12

Done!

Original Tango Key Programmer Update to V1.107.7 (Details)

14-1

Here is the newest update of Tango Key Programmer V1.107.7 for you! This blog will show you all update details. Hope it helps!

14-1

14-2

Tango Programmer Newest Version V1.107 Details and Information:

(Hardware V1.079)

Again FIRST in the WORLD:

1) Daihatsu-G TRUE Image generator (Page1 3B, 5B)

2) Copying of Daihatsu-G keys

Dump editor to pair Smart key ECU with ID CODE ECU

True calculation of synchro code on Smart key ECU

Dump editor pairs all four units: Engine ECU, Smart key ECU and Steering

Lock ECU and ID CODE ECU

Improved Toyota Certification maker:

– ADD a Key

– Solution if ONE key only

Tango V1.107 NEWLY Added:

Transponders LKP-02 (Emulation of 4C, 4D, 4D80, 4E)

Keymaker VW Passat 1997- (93C66,ID48)

Keymaker Daihatsu Move 2010-(93C66, DST80)*

Keymaker Toyota Avanza 2010- (93C66, DST80)*

Image generator Daihatsu DST40

Which Auto key programmer best for American and Asian cars

9-1

Are you confused about which Car Key Programmer is best for American and Asian cars? This blog will recommend three key programmers with different prices: OBDSTAR X-100 PROSuperOBD SKP-900 and Tango Programmer. The details are as follows:

Here you will start from learning OBDSTAR X-100 PRO, SuperOBD SKP900 and Tango programmer separately, then user feedbacks on these three tools, then a short conclusion at last.

OBDSTAR X-100 PRO Auto Key Programmer for American and Asian cars

9-1

Price: $299

X100 PRO C+D Type function: Immobilizer remote match+ Odometer+ OBD Software

http://www.cnautotool.com/goods-4936-OBDSTAR+X-100+PRO+Auto+Key+Programmer+%28CDE%29+Type+for+IMMOOdometerOBD+Software+EEPROM+Function.html

OBDSTAR X-100 PRO Programmer supported car list:

Insignia 2011 read security code +program keys OK
just make key for ford focus 2011 on 80bit tranposnder 10 min job done
Astra J 2011 X100 Pro from OBDSTAR pull pin OK
Audi a4 1998 pin read. OK
Arosa 2003 immo2 pin code no
Corsa b 1.0/1.2 pin read no, several cars, pin read by Carprog and next by x100
Corsa c 1.0/1.2 pin read no, 2 cars, pin read by Carprog and next by x100
Chevrolet cruze 2013,2012 pin reading ok,program key and remote ok,mileage ok.
Dodge Journey various models pin reading and key learning ok.
Kia rio 2012. Read pin-ok. Program new key-ok
Nissan Primera P11 2000. Chip 4D (ID60) – key programming – OK (need PIN).
Honda early model with 3pin conector ok.
Nissan Versa 2015 and 2016 read bcm,calculate pin and smart key learning ok.
Nissan Xterra 2007, reading BCM code, calculating PIN, re-adapting used key,OK
Hyundai Elantra 2010 key learning and neutralize ecm ok.
Ford Mondeo 2013 smart key *EU ok
Ford Ecosport 2013 facelift program key ok.
Ford Fiesta 2014 facelift program key ok.
Ford Focus 2010 incode bypass and program key ok.
Ford Focus 2012 key programming -OK
Ford focus 2007 pin reading OK and key coding but you need to go online to calculate pin code
Fabia 1.4 16v 2002 pin read from dash, ok
Golf 4 1997 1.6 pin read ok
Honda Jazz 1,2 2004 pin code no.
Mazda 6 2012 smart key ok transponder and remote,
Mazda 2,3,6 ok
Polo 2008 d pin read ok keys and remotes ok
Passat 2002 1,9 tdi pin read from dash, ok
Peugeot 206 2003 1.4 add new key and remote. ok U need pin code.
Touran 2007 d pin read ok

OBDSTAR X-100 PRO Highlight: 

Support EEPROM Function (EEPROM Chip read and Immobilizer initialization)

Note: It doesn’t support Toyota G Chip and Proton.

What about OBDSTAR X-100 PRO update?

OBDSTAR X-100 PRO update free online on official website for 1 year.

SuperOBD SKP-900 Key Programmer for American and Asian cars

9-2

Price: $378

SKP-900 can support almost all cars in the world, such as Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, Hyundai, Kia, and so on.

http://www.cnautotool.com/goods-4364-SuperOBD+SKP-900+Hand-Held+OBD2+Auto+Key+Programmer+V27+Support+Almost+All+Cars+Lifetime+Free+Update.html

SKP900 Key Programmer supported list:

http://forobd2tool.com/wp-content/download/SKP900/skp-900-supported-car-model.pdf

SKP-900 Key Programmer Highlights:

1.It can program many car key without need for Pin Code. Besides, it can read Pin Code for many cars.
2.It support TOYOTA G chip.

What about SKP-900 update and token issue?

1.SKP-900 update free monthly.
2.SKP-900 need tokens but it is free to add tokens.

Tango key programmer for American and Asian cars

9-3

Price: $370

http://www.cnautotool.com/goods-1726-Original+Tango+Key+Programmer+with+Basic+Software.html

What transponders Tango key programmer can do?

Philips Transponders, Temic Transponders, Megamos Transponders, Texas Transponders, Atmel Transponders.

Tango programmer’s features:

1.It can read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
2.It can produce working keys by EEPROM dump, identify transponders and clone keys.

Tango programmer’s supported car list/ transponder list:

Acura
Brilliance
Chang an
Chang cheng
Chery
Daewoo
Daihatsu
FAW Group
Geely
Great Wall
Honda
Hyundai
Infiniti
Isuzu
Kawasaki
Kia
Lexus
Mazda
Mitsubishi
Nissan
Proton
Roewe
Saipa
Sammand
SsangYoung
Subaru
Suzuki
Tata
Toyota
Yamaha
AD100 Out – In codes 8 digits calculator

BMW CAS Keyless Go key maker
BMW CAS remote key maker
BMW CAS unlock and write locked with unknown password  transponders PCF7943&PCF7944 key maker
BMW bikes (Hi Tag 2) Key maker
DAF key maker
KESSY (Hi Tag 2) Audi , Bentley, Porshe, VW key maker
New AUDI A6/Q7 EZS (Megamos 8E) Key maker
VW Key maker
FREE Off-line Full Copy of TIRIS DST (ID60-70) onto TPX2,EH2
FREE Image generator ID70 on ID4D
Image generator ID67/68 on ID4D
Full FREE production of TP22, TP23, TP24, TP25

What special functions Tango have? (Tango highlight)

1.After generating a new transponder with Obd2 Key Programmer TANGO, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
2.Tango can read kilometers, VIN and transponder types.

What about Tango update and token issue?

1.This Original TANGO Key Programmer with basic software update online free. (Now you can get Free Daihatsu G Chip Authorization support both write and copy at uobdii.com) You need to pay for authorization when add additional capabilities, special function or work it on special car model.
2.TANGO Key Programmer doesn’t need tokens!

User feedbacks on OBDSTAR X-100 PRO, SuperOBD SKP900 and Tango:

Very good for Asian and American cars is SKP-900. But I also use Tango. Tango is excellent, but can’t do cars remote locking for example and is all for off car programming (needing XPROG etc)

I use X100 pro OBDSTAR. I’m very happy with it. Not perfect but very good!

I have x-100 pro and it’s nowhere near as good as SKP900 FROM CnAutotool, also Tango in my opinion is much better for off car programming. SKP900 has very good OBD coverage especially American cars. Tango is superb for all difficult and on the bench. Moreover Tango is very good at EEPROM Applications.

Conclusion:

There is no a perfect key programmer that can do all car keys in all occasions. But you can find a better one which is good and useful for your own usage. Hope this blog helps.

Solved MD5 Failed ERROR for Tango Key Programmer

OEM Tango Key Programmer with Basic Software V1.97.12 is a super new generation transponder programmer supporting read, write and generate the latest transponder, additionally with newly added functions, such as reading kilometers, VIN and transponder type for all BMW keys being added to BMW software module.

What l listed above is the main reason (powerful functions) why I choose Tango key programmer as an assistant serve my car. While I met the error reading “MD5 Failed” under the case that I tried to update my Tango transponder programmer.
4-1

4-2

Note: Newest software update: V1.97.12, connect your device to computer and choose good internet, start the software and go to [help] >> [check update], then you can update to latest software.

The following part list some screen shots during the process:

Under this case, I asked CnAutotool Engineer for help, follow the solution below to settle the update error:

Tango Key Programmer needs to update per 28 days, otherwise the device will be locked.