Tag Archive: VXDIAG VCX DoIP Porsche Tester Piwis III

How to set up VXDIAG Porsche PIWIS3 VCX DoIP WiFi connection

Question:
I cannot mange to setup wireless connection between vxdiag vcx doip VXDIAG Porsche PIWIS 3 and laptop. How can i enable wifi connection? How to search WLAN and set up IP address?

vxdiag-porsche-piwis-2-wifi-1
vxdiag-porsche-piwis-2-wifi-2

CnAutotool.com solution:

Porsche PIWIS3 Wifi setting is the same as VXDIAG Porsche PIWIS2
How to set up/connect VXDIAG Porsche PIWIS2 VCX Plus with laptop via WiFi?
1.Click [SETTINGS]->[Network settings]

vxdiag-porsche-piwis-2-wifi-4
vxdiag-porsche-piwis-2-wifi-5
2.Click [WLAN],then Select a network card

vxdiag-porsche-piwis-2-wifi-6
3.Click [Search],then click select Network name,and input Network Key
4.obtain ip address automatically:select [Obtain IP address automatically] and [Obtain DNS server address automatically],then click [Save]

vxdiag-porsche-piwis-2-wifi-7
5.Manually settings IP address : select [Use following IP addresses] and [Use following DNS server addresses],then input IP address 、subnet mask 、standard gateway 、Preferred DNS Server , then click [Save]

Piwis 3 Compare With Piwis Tester 2

As the VXDIAG Porsche PIWIS 3 for Porsche diagnostic & programming released, most client inquiry for the Piwis 3 to replace Piwis tester ii for Porsche new models. Some client asks what’s the difference between Piwis Tester II & Piwis 3. whether the Piwis II work with the Piwis 3 software? Below CnAutotool.com share one client opinion for this.
Purchase Piwis 2 or Piwis 3?

 

It may be an interesting subject, I’m sure there is some information about this out here.

First of all, the Piwis 2 interface is a lot more robust piece of equipment, compared to the cheesy and flimsy looking and feeling interface produced by Actia for Piwis 3.

Originally designed for the VW ODIS system, the VAS6154 VCI is quite the service needy piece. [Breaks easily] not a hard comparison to make.
Is it worth to purchase Piwis 3 replace Piwis 2 now? Can the Porsche Piwis 2 compatible with Piwis 3 Software?

This answer for the question of whether Piwis 3 software can work with Piwis II Samtec HSX Interface from Piwis-Tester-2.com?

Secondly, I thought the Piwis 3 for Porsche went cheap. [my humble opinion, way below Porsche standard!]

At the same time, there is a service from Poland and Ukraine [If I remember correctly] that can make the Samtec based Piwis 2 VCI from Piwis-Tester-2.com, to work with Piwis 3.

Unfortunately, their charges are just as much and frankly cost prohibitive as the New Piwis 3 VCI. 2-3-4 thousand dollars for these VCIs is simply not reasonable for small operators.

They will come down in price just like the Chinese VCIs did for all manufacturers as the markets get saturated and folks are not buying them as eagerly as at the beginning of the Piwis 3 had.

They will get as much money as the market bares. [as much as people are willing to pay]

Your more pointed answers will not come in this tread Ibi. This is Cars Fan’s money-making tread, he will not volunteer any information, but if U start your own tread, U may be more likely to find out stuff.

Regards,

What Do the Piwis 3 updates replace Piwis 2?

Diagnostics application is used for communication with control units. You can search for, identify, code and control program units, read out the event memory, execute complex processes, change drive links and execute routines.

Guided fault finding (GFF) generates a test plan for a fault code. This test plan shows the best sequence for carrying out tests. GFF compiles a list of recommended tests, documents and wiring diagrams

Actual values/input signals functions display you the actual values and input signals of control units

Drive links/tests function displays the drive links of control units, allows you to change the parameters of these drive links and run test routines for individual control units

Maintenance/repairs function group – use this function to call up control unit-specific processes that cannot be implemented generically from the ODX data

Coding/programming function group – use this function to write coding values. Piwis 3 can code Values automatically or set manually. This function group includes (Automatic coding, Manual

coding, Customer-specific settings, and Factory settings) coding modes

Logging – use this function to activate logging for diagnostics, guided fault finding (GFF) and measuring equipment applications. Temporary and permanent working log can be created

Filter – use this function to limit the view of the control units installed in the vehicle. In the diagnostic application, you can create, edit, activate, deactivate or assign filters

Wiring diagrams application is the representation of physical connections and layouts of circuits

Measuring equipment interface work for DC and AC voltage measurement, direct and alternating current measurement, diode testing, resistance measurement, continuity/open circuit testing, showing voltage, current and resistance over time (oscilloscope function)

Porsche Piwis Tester III with Panasonic CF54 Piwis3 PT3G Ver 37.250.020

Porsche Piwis Tester III with Panasonic CF54 Piwis3 PT3G Ver 37.250.020

Porsche Piwis Tester III is the newest fully operational diagnostic equipment based on PIWIS vehicle interface and Porsche software. Piwis Tester III provides exclusive support for Panamera G2, Cayenne E3 and all 2017 model range and above also provides legacy support for older models.

It is the new third generation Porsche diagnostic tool, it’s update to modern user interface, more faster performance, also have: license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work.
Porsche Piwis Tester III Main Unit

Porsche-Piwis-Tester-III-with-Panasonic-CF54-Piwis3-PT3G-Ver-37.250.020-1

Version: 37.250.020
License: Unlimited
Update: Via DVD or Online
Support Online Programming, no develop mode
Multi-Languages
Porsche Piwis 3 Languages

Porsche-Piwis-Tester-III-with-Panasonic-CF54-Piwis3-PT3G-Ver-37.250.020-2

Porsche Piwis Tester III main functions
? General ECU diagnostics (DTC read/clear)
? Guided fault finding
? ECU programming/coding
? Real-time control parameters display
? Electrical schematics mapping

Porsche PIWIS 3 advantages
? Exclusive support for 2017 model range and above (Panamera G2, Cayenne E3)
? Fast and stable connection Simulation mode (diagnostic session without VCI connection)
? End user capable DVD update
? Wired USB connection

Porsche PIWIS 3 Packing List:
1pc x Piwis 3 VCI
1pc x USB Cable
1pc x Laptop Power Adapter
1pc x Panasonic CF54 Laptop(Software Preinstalled,Ready to work)

Porsche-Piwis-Tester-III-with-Panasonic-CF54-Piwis3-PT3G-Ver-37.250.020-3 Porsche-Piwis-Tester-III-with-Panasonic-CF54-Piwis3-PT3G-Ver-37.250.020-4 Porsche-Piwis-Tester-III-with-Panasonic-CF54-Piwis3-PT3G-Ver-37.250.020-5