I consulted BMW ICOM A2 from the professional technician mainly because I read much information in BMW forums telling that the only difference between ICOM A2 & ICOM is the hardware.ICOM A is the basic component. In physical terms, it would provide the vehicle diagnostic interface OBD II interface, and provide adaptive integration to the repair shop network interfaces required. Voltage is provided by KL30 by vehicle interface. ICOM A requirement of the electrical operation of a minimum voltage of 8V. Only the supplied voltage exceeds the minimum limit in order to ensure a stable function.
How to connect BMW ICOM A2 Wifi
1. Insert D-LINK
2. Start your computer
3. Double click “ISPI-NEXT Admin Tools” shortcuts on your desktop, wait about 20 seconds until the software startup.
4. Select “Wifi For ICOM”, wait about 5 seconds until it ticks.
5. At this time, you can check Wifi connection in your phone, you will find Wifi name “ISAP” after D-LINK successfully startup.
6. Connect ICOM to vehicle.
7. After ICOM SYSTEM light stop flashing, WLAN light will flash for several seconds then keep on, it means ICOM is successfully connected to the computer.
Leave a Reply