Uncategorized

Renault CAN CLIP V168 Test Report: Success!

V168 CAN Clip for Renault diagnostic software has been tested to work without any issue!

Purpose: This write-up explains how RenaultCLiP V168 works successfully!

Overview: About Renault Can Clip. You do not need to postpone your trip because of reprogramming or airbag issues that your Renault car is facing. With Renault CAN clip, you can scan and diagnose different problems that you car may have before a long trip.

Test scope:
– In Scope
– Out of Scope

A functionality verification which needs connectivity to a third party application cannot be tested, as the connectivity could not be established due to some technical limitations. This section should be clearly documented, else it will be assumed that Testing covered all areas of the application.

a) In Scope
Functional Testing for the following modules are in Scope of Testing
·Functions tested: OBDII diagnosis, ECU reprogramming.
·Systems tested: ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I, etc.

b) Out of Scope
Performance Testing was not done for this application.
·Renault can clip key programming
·Renault can clip ECU programming

Note: you can try FVDI2Renault or Renault-COM for programming.

Metrics:
A) No. of test cases planned vs executed
b) No. of test cases passed/failed
http://forobd2tool.com/wp-content/uploads/2017/06/22/14-1.jpg

Test environment and tools:
http://forobd2tool.com/wp-content/uploads/2017/06/22/14-2.jpg

Lessons Learned:
– Issues faced:
Connected to the car and four lights are lit Prompted for this content: 5800 window, units of measurement appear 104 Error 5800: Please check the power supply is connected, the normal connection indicator light red flashes. If it is any problem of these two situations: reconnect, wait about 10 seconds before verification.

– Solutions:
1) The installed software can’t run in your computer system stably, there is no communication between the software and the device.
2) The computer USB interface does not work, try to use another one.

 

2017 BMW AK91 Plus key programmer

2017 BMW AK91 Plus Key Programmer is BMW AK91+ Key Maker.  V4.00 BMW AK91 plus software is the last update of v3.19 bmw ak90. CnAutotool.com 2017 BMW AK91 Plus key programmer with V4.00 BMW AK91 plus software adds key information identification function of the new BMW F series CAS4/CAS4+/ new Porsche.

BMW AK91 Plus from CnAutotool.com adds key information identification function of the new BMW F series CAS4/CAS4+/ new Porsche; supports reading frame number, key state, KM data.

CnAutotool.com BMW AK91 Plus Key Programmer V4.00 for BMW EWS Support EWS4.4

Latest update software version is V4.00 for EWS4.4

AK91 Plus adds key information identification function of the new BMW F series CAS4/CAS4+/ new Porsche;

support reading frame number, key state, KM data.

AK91 Plus support BMW E series PCF7945 chip, F series CAS4/CAS4+ factory and the original factory PCF7953 chip refresh function
(restore to a new key state); no need to disassemble the chip free, safe and efficient.

AK91 Plus BMW KEY-PROG can read the key information on all BMW EWS 1995-2009. It speeds up the EWS reading & writing. It is safe and effective BMW EWS key programmer

Auto key Programmer BMW AK91 Plus Key Programmer Function:

1. Directly reading data dumps from MCU which marked 1D47J, 2D47J, 0D46J, 2L86D without removing MCU from circuit board, easy to do yourself.
2. With the help of software you can change VIN, Mileage and renew,lock or unlock keys as well.
3. Programming original chips “EML 10030A” for making keys.
4. Identifying keys for all EWS, showing VIN, key No. and mileage.

How Can You Update Your Launch X431 V/V+/Pro With Small Fees

How Can You Update Your Launch X431 V/V+/Pro With Small Fees

 

All the Launch Scanner users know that the latest launch x431 diagnostic tools with dbscar connector is with only one year free update online. After one year, you need to pay a lot of update fee, for example, if you want to update your launch x431 pro or pad, you need to pay more than thousand dollars. The price is beyond your budget, but you really need the latest software. Where can you get the help on it? Is there any solution? Yes, you can visit cnautotool and search item number A221-1 LAUNCH X431 5C Wifi/Bluetooth Tabletand then place order directly. After you place order, please send us your launch x431 pro or pad clear sn photo. Then we will send you the latest software by email.
Can I get the latest update by email for my launch x431 pro3?
Yes, we can send you the latest update softwares by email for all launch x431 scan tools like Launch X431 V /V+/Diagun Iii/ Pro /Pro3/ Pros/ Pro3S/ PAD/5C. But please remember to send us the necessary sn photo. If the SN is not right, the software won’t be compatible with your hardware. LAUNCH X431 5C Wifi/Bluetooth Tablet is only 128USD. For details, welcome to check: http://www.cnautotool.com/goods-4584-The+Update+for+Launch+X431+V+Vdiagun+iii+pro+pro3+pros+pro3S+PAD5C.html

Best Obd2 Scanner Super Launch X431 Idiag With 100 Software

Launch x431 heavy duty Scanner Super Launch X431 Idiag With 100 Software

 

 

if you are looking for the best obd2 scanner for different vehicles recently, please do check our this new tool-Launch x431 heavy duty. It can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and full car system diagnose make it a professional automotive diagnostic tool. Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special functions etc; If the other brand diagnostic tools like Launch, Autel, Autoboss, Xtool, OBDStar ect are too expensive and you can not afford to it, do not hesitate to buy this super launch x431 idiag with only 188USD on cnautotool.
Launch x431 heavy dutyBluetooth Connector Vehicle List:
USA Car Software Bundle List:
E0BD,Buick,Cadillac,Chevrolet,Chrysler,Dodge,Fiat(Brazil),FORD,USAFORD,GM,GM(Brazil),Jeep,Lincoln
European Car Software Bundle List:
Abarth,Romeo,Audi,Bentley,BMW,Bugatti,Citroen,Dacia,Ferrari,Fiat,EURO Ford,GAZ,GMSA,Jaguar,Lancia, Landrover,Maserati,Maybach,Bugatti,Mini,Opel,Peugeot,Porsche,Renault,Rollsroyce,Rover, Saab,Seat,Skoda,Smart,Sprinter,Vauxhall,VAZ,Volvo,VW
Asia Car Software Bundle List:
Acura, Changan, ChangCheng, Daewoo, Daihatsu, Flyer, Australia Ford, Hafei, HaoQing, Holden, Honda, HuaChen, Hyundai, Infiniti, Isuzu, Jacty, Jiao, JinLong, JPIsuzu, Kia, Lexus, Luwei_TY, Mahindra, Maruti, Mazda, Mitsubishi, Nissan, Perodua, Proton, Qirui_TY, SSANGYONG, Subaru, Suzuki, Tata, TLIsuzu, Toyota, Xiali, ZhongShun, ZhongTai and ZhongXing.
Resetfuntion: Reserbms,Resetbrake,Reseroil,Resettpms,Resetets,Resetdpf,Resetbleed,Ecuaid,Resetgear

OurLaunch x431 heavy duty can be installed in any phone and tablet with Android system. There is detailed instruction in the package and easy to install. But it needs your phone or tablet is with extra spare space more than 2GB, otherwise it can not work normally. Anyway the more space, the better it can work. It can replace launch x431 IV,V,V+X431 Diagun 3,X431 PROand X431 PRO3,available for some 12V diesel cars. You can select different software language before ship.

MB SD C5 Star Diagnostic Tool Has Update Software 2016.09

MB STAR C5 Star Diagnostic Tool Has Update Software 2016.09

 

Our A358-3 MB STAR C5 Star Diagnostic Tool With Vediamo V05.00.06 Engineering Software Plus EVG7 Tablet PC Support Offline Program has latest update software now, it’s till 2016.09, welcome to visit cnautotool and buy it. The highlights for C5 is that it includes the Super Engineer Mode for Benz cars Vediamo, vediamocbf is 8.16GB. What’s the function for this software? It’s a diagnostic application for measurement analysis, control of actuators, DTC reading, activation of ECU functions, flashing, variant coding, parametrize and calibrate of ECUs, and for erecution of automated test sequences(Scripts).

New MB Compact 5 Features
1. New MB SD Connect Compact 5 Star Diagnosis support wireless diagnose;
2. New MB SD Connect Compact 5 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol.
Because old MB STAR C5 main board do not have UDS chip, so old MB STAR C5 can not support it;
3. Multiplexer now use Lan cable to connect
4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;
5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;

The software will be preinstalled in the EVG7 tablet for thisMB STAR C5, you can get it work directly after you receive it. But please note that you can not connect it to internet when you use it or can not update it, otherwise the software will be damaged at once. If you pay attention to it, the full set of c5 plus tablet including software will be your great assistant.

The customer feedback of MB SD Connect C5

MB SD C5 Star Diagnostic Tool newest software version is 2017.03 now . the mb strar c5 diagnostic tool support Benz cars, trucks, bus, passenger car and more.

mb stra c5 Super engineer software DTSmonaco  it can achieve separate programming, scan entire vehicle software code, read entire vehicle setting code data, It truly one-button operation, Keep entire vehicle data.

The new Mercedes Benz diagnostic tool MB SD Connect C5 clone is verified working great. Here are customer feedback to Benz C5 SD Connect (not original Xentry Connect C5).

1.“Mercedes Sprinter year 2006 and 2014 works, both the diagnosis, All the personal cars also works, no problem”

2.“All the trucks including euro6 also works, no problem. Bus Mercedes Tourismo euro5 year 2010-2012 test works, BUT year 2014 euro6 does NOT work, it says that the license is invalid. Both sd c4 and sd c5, we have tested both on the same cars, to be sure.”

3.SD Connect C5 this one customer has test, works good, in function it no difference with SD C4, but performance it is better. So you can buy MB SD C5 if you want buy new MUX. SD C5 use the same software as Mb Star C4.

How Can You Update Your Launch X431 V/V+/Pro With Small Fees

b

All the Launch Scanner users know that the latest launch x431 diagnostic tools with dbscar connector is with only one year free update online. After one year, you need to pay a lot of update fee, for example, if you want to update your launch x431 pro or pad, you need to pay more than thousand dollars. The price is beyond your budget, but you really need the latest software. Where can you get the help on it? Is there any solution? Yes, you can visit cnautotool and search item number A221-1 The Update For Launch X431 V /V+/Diagun Iii/ Pro /Pro3/ Pros/ Pro3S/ PAD/5C and then place order directly. After you place order, please send us your launch x431 pro or pad clear sn photo. Then we will send you the latest software by email.

Can I get the latest update by email for my x431 pro3?
Yes, we can send you the latest update softwares by email for all launch x431 scan tools like Launch X431 V /V+/Diagun Iii/ Pro /Pro3/ Pros/ Pro3S/ PAD/5C. But please remember to send us the necessary sn photo. If the SN is not right, the software won’t be compatible with your hardware. Update Launch X431 V /V+/Diagun Iii/ Pro /Pro3/ Pros/ Pro3S/ PAD/5C is only 128USD. For details, welcome to check: http://www.cnautotool.com/goods-4584-The+Update+for+Launch+X431+V+Vdiagun+iii+pro+pro3+pros+pro3S+PAD5C.html

BMW ICOM A2 With V2017.03 Engineers software Plus EVG7 Tablet PC Ready to Use

BMW ICOM A2 With V2017.03 Engineers software Plus EVG7 Tablet PC Ready to Use
BMW ICOM A2 With V2017.03 Engineers software Plus EVG7 Tablet PC Ready to Use
Software version:
V2017.03
ISTA-D 4.04.12
ISTA-P 3.60.2.001
VIN: 2017.02.13
Not connected 9000 days remaining

BMW ETK: 2017.2
BMW KSD 09.2016 Multilanguage
With free BMW Engineer Software (INPA, NCS, WinKFP, E-Sys 3.27.1, Psdzdata 59.0), BMW FSC code generator and BMW AiCoder

Multi-language available in diagnosing, programming and TIS diagram circuit: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.

System Requirements:
Dual-core processor, better above I3; over 4G of memory

EVG7 DL46 Specification:
Mark : EVG7
Model : DL46
Processor : Intel Celeron 1037(Dual – 1.8Ghz/L3 2M)
DDR : The biggest support memory : 4GB
HDD : 500 GB SATA HDD.
LCD : 10.4 Inch The resolution of the 1024×768
Graphics : touchscreen widescreen LED backlight, the core graphics Intel HD Graphics
Speakers : Built-in Speakers
Wireless : 802.11b/g/n
LAN : The built-in 10-100M card
Bluetooth : BT2.0 , 4.0
USB : USB3.0 / Mini USB / 2 x USB2.0
Card Reader : TF Card Reader
Other Interface : VGA Voice Input / The Sound Output / DC Power Jack / Parallel LPT Port I/O VGA Output
Battery Type : 9 The core of lithium batteries 10.08V 6600 mAh
Power Adapter : 110V-240V The adaptive communication power supply
Battery Life : The specific time depending on the use environment
Specifications : 270x180x60 mm
weight : 1911g (with battery)
Certificates : CE / FCC /  RoH

Top 5 Reasons to Get BMW ICOM A2 with Latest Software
1.BMW ICOM A2 Hardware Version: V01.40.05
2.Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3.Support BMW All Series Diagnose and Programming
4.With Bonus Engineer Programming Software
5.NEW EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC Ready to Use

Notice of BMW ICOM A2+B+C:
1. No Network And Also No Connection With The Original Server When You Use The BMW ICOM Software HDD, Ortherwise It Is Will Be Damaged, And Need You Send Back For Repair
2. If your BMW ICOM HDD got error “database version mismach, the found database version are not compatible”, just need to set the ISTA/D language as American English

Latest Professional Motor Diagnostic Scanner MCT-500 MCT500 Motor Scanner Tool

Professional Motor Diagnostic Scanner MCT500 is the latest and best scanner for Motorcycle diagnosis, the belows are the informations about the MCT-500 Motor Diagnostic Tool

Languages
English.Chinese. Vietnamesa and Indonesian
MCT-200 Universal Motorcycles scanner Update:
1. Update procedure is easy.
1) Connect the USB cable with PC, select “USB storage” option, the PC will detect the device as new flash disk.
2) Copy the update tool files to the disk, follow the tips to finish updating procedure. ( If your TF card can not be reset, please follow the tips to disconnect and connect power, then finish the updating procedure)
2. Device can be used as a USB flash disk
When connect USB cable with PC and select “USB storage” option, the device can be used a USB flash disk which can save files based on your needs. Disable the flash disk on PC when finish using. The scanner will back to Main Menu automatically.
Replace TF card and battery
If the TF card is damaged or the battery is low, open the device back cover to replace. Make sure the scanner is power off before replacing.
NOTE: MCT-500 Motorcycle scanner’s TF card is FAT32 format. Please pay attention when formatting SD card. Otherwise the scanner will not work properly

More details please contact with us: sale@cnautotool.com

Best Heavy Duty Truck Scanner-DPA5 Dearborn Portocol Adapter 5


The DPA5 Dearborn Portocol Adapter 5 device
is to be used by those trained in the troubleshooting and diagnostics of light-duty through heavy-duty vehicles. It covers all critical systems, including engines, transmissions, brake warning device, comfort, safety, emissions, air suspension, trailer and maintenance,to provide in-depth functionality for each application. The user is assumed to have a very good understanding of the electronic systems contained on the vehicles and the potential hazards related to working in a shop-floor environment.

The DPA 5 truck scanner products are used to connect vehicle and equipment communication networks to personal computers (PCs).
This allows programs written for the PC to retrieve pertinent information such as fault codes, component information, as
well as perform component level diagnostics, tests, and component reprogramming. The DPA 5 communicates with the
PC using either a USB cable or via Bluetooth (Class I or Class II), and comes standard with Technology and Maintenance Council (TMC) Recommended Practice (RP) RP1210C-compliant drivers, as well as Society of Automotive Engineers
(SAE) J2534-compliant drivers.

DPA5 Truck Diagnostic Tool is provided with a Technology and Maintenance Council (TMC) RP1210C compliant (backwards compatible with RP1210B and RP1210A) interface and has been validated against the following OEM and component applications:
Detroit Diesel Diagnostic Link  7.05
Caterpillar  Electronic Technician  2010B
Cummins Insite  7.5(windows XP and 7), inste 7.6(only for windows 7)
International – ServiceMAXX Fleet Pro
Volvo PTT 2.40
VCADS /Elite Mack/Volvo  2.35
V-MAC Service Tools
Allison DOC? For PC-Service Tool – Protocols Supported: J1939, GMLAN, J1708/J1587, J1850, and
ATEC160
Allison DOC For PC (AED) – Protocols Supported: J1939
Allison DOC For Fleets (1000/2000) – Protocols Supported: J1939, J1850, GMLAN
Allison DOC For Fleets (3000/4000) – Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger 3.2
Bendix Acom
ZF-Meritor TransSoft  / WABCO Toolbox
International ABS
International DLB
International Intune
International IPC v2.02
Perkins EST Diagnostic Interface  2010

DPA5 Heavy Duty Scanner is your best choice for manufacturers diagnosing the fault of trucks, trailers, buses and light commercial vehicles. It supports bluetooth function. Welcome to buy it on cnautotool with price only 438USD. For details, please check: http://www.cnautotool.com/goods-4317-DPA5+Dearborn+Portocol+Adapter+5+Heavy+Duty+Truck+Scanner+With+Bluetooth.html