Tag Archive: Autel Scanner

How to setup Printer on Auro IM600

Q: Anyone know how to setup printer on Auro Otosys IM600/ Autel MaxiIM IM608?

A: Same process as Autel MaxiSys series scanners. Check step-by-step instructions below.

 

How to enable IM600/IM608 wireless printing?

Autel scan tools cannot sent files directly to a wireless printer.

Instead, you need to install PC Suite software onto a computer which the scan tool will use as a gateway to print.

Install the Maxi PC Suite from the Autel

Download thew new Maxi PC Suite from Autel official website

Autel Printer App system requirement:

A computer connected to the same network (wired or wireless) as the Autel unit
Win7 Extractor or WinRAR (The Autel file is downloaded in a .ZIP format and must be extracted)
A restart is required after installation

The drivers for the Autel j2534 and PC Link for wireless printing are included in the Maxi PC suite.

Go to Supports & Updates->Firmware & Download-> Update Client-> Download Here

setup-printer-on-im600-im608-3

Remove Maxi PC Suite is it is currently installed.
Skip this step if you have latest Maxi PC Suite installed

setup-printer-on-im600-im608-4

Install the new Maxi PC Suite software

setup-printer-on-im600-im608-5 setup-printer-on-im600-im608-6 setup-printer-on-im600-im608-7

Make sure the latest Adobe Acrobat Reader is installed
setup-printer-on-im600-im608-8

Add exceptions to anti virus

setup-printer-on-im600-im608-9

Allow PC Link Program on Windows Firewall

setup-printer-on-im600-im608-10

Open PC Link from Maxi PC Suite

setup-printer-on-im600-im608-11

Make sure the PC Link is running in the background process

Open MaxiSys Printer

(Verify the Maxi PC suite is running? The easiest way to check the system tray at the bottom right on the task bar for the Maxisys Printer Icon.)

setup-printer-on-im600-im608-12

Disable Auto Print

setup-printer-on-im600-im608-13

Perform a test print from the Autel IM608

setup-printer-on-im600-im608-14 setup-printer-on-im600-im608-15
After tapping the print option, you should see the “Creating print file” dialog box.

setup-printer-on-im600-im608-16

You may be asked to select a “Printer”, which is simply the name of the computer, if there is more than one computer running the PC Link software. Tap to select a computer destination which will be indicated by the blue check mark. Then press, “OK”

setup-printer-on-im600-im608-17

The “Upload file to the printer” dialog box should appear for several seconds, and will disappear when the file is transfer to the computer.

setup-printer-on-im600-im608-18

Print confirmed

setup-printer-on-im600-im608-19

setup-printer-on-im600-im608-20

You should now be able to print any single page or entire report from your Autel diagnostic tools by selecting the print icon in the top right of the Maxi PC Suite pages.

BTW,  Autel IM608 is compatible with add-on functions oscilloscope, digital videoscope and digital Inspection Camera as MaxiSys series.

Autel MaxiSys Pro MS908P Review

You’re a professional mechanic, an enthusiast or and mechanic shop owner? Then you are here on the right page with the in-depth review about Maxisys MS908P, which is only for mechanics.
2-1
The Autel MaxiSys Pro MS908P Professional OBD2  scanner provides best solutions for ECU programming and Specialized Automotive Diagnosing.Autel MaxiSys Pro MS908P is easy to use with a large pool of features that ensure optimum diagnosis performance.

MS908P is capable of covering all diagnostics that are OE-related. It’s the best solution for diagnosing peerless smart vehicle repairs.

Autel MS908P runs on Android OS thus enables you to multitask and manage many applications at the same time. By this you are able to fix a particular part of the engine and at the same time monitor the effects it has on other parts.

The diagnostic scan tool has a wide vehicle coverage, from 1996 onward. It can work efficiently with over 80 vehicle makes in the US, Europe and Asia.

MaxiSys pro Software as well as a reprogramming box is incorporated into the tool to make it possible to solve complicated problems.

The Autel Maxisys Pro MS908P OBD2 scanner enables enhanced vehicle identification, quick and accurate, as with its Auto-Vin technology.

Autel MaxiSys Pro MS908P: Features

1. Super fast diagnosis

It runs on an Android 4.0 OS and has a strong Cortex-A9 Samsung Exynos 1.4 GHz processor which enhances its speed a great deal and allows multi tasking. When powering it on, it takes 20 seconds to boot up, a speed that is approximately 5 times quicker than similar products in the market.

2. Auto-Vin Technology

This is a new technology for quick and precise identification of vehicles that are CAN-enabled with just a single touch. Data is displayed in texts as well as graphs which makes analysis easy and efficient.Once it has identified a vehicle, it not only runs diagnosis of the engine, but on all the selected systems as well

3. Battery Recharge

MS908P is for professional mechanics only. Its 11000mAH-3.7V battery lasts up to eight hours with continuous operation and it’s only a few of hours of recharging.

4. Extensive Vehicle Coverage

It is designed to work efficiently on more than 80 US, European and Asian models.

5. Smart Screen

The 9.7 inches IPS touch-screen is LED-back-lit and has a 1024 by 768 resolution thus providing a clear contents display. Multi-touch is also an added advantage with a possibility of 5 touches at a go.

6. Sufficient Storage Capacity

The Autel Scanner MaxiSys Pro MS908P has 2 GB DDR-3 RAM, which comfortably handles large numbers of files and support live streaming without hanging.The 32 GB internal hard drives provide enough space for storing all the clients’ detailed history.

7. Autofocus Camera

The 5-megapixel in-built rear camera provides images of high quality with its auto-focusing capability. the camera has a flashlight as well.

8. Easy Printing

The tool enables easy printing using any PC that runs on Windows or a Wi-Fi enabled printer.

9. High-Level Configuration

This diagnostic tool covers almost all OE-Level Diagnostics. This means that OE_level library in the device contains all error codes that are likely to occur.

You, therefore, do not have to contact a car dealer in case of an unidentified error.

10. DataLogging

These sessions are interactive, giving you the chance to contact Autel Technical team directly in case of any challenges with the device.

It gives you easy and unlimited technical support remotely.

11. Compact and Light

The device weighs 28.9 pounds, making it easy and suitable to carry.

Its dimensions are 9 by 18 by 7.6 inches in length, width and height respectively.

12. MaxiFix

This is an additional feature in the cloud which enables users to network and access a database of procedures, repair and diagnostic tools.

You are able to interact with fellow technicians and share knowledge via MaxiFix.

Other additional features include fast data transfer with both Wi-Fi and Bluetooth and notification center for updates and news.

Autel Maxidas DS808 full kit fit small repair shop – affordable price and good performance

I have the first generation Autel Maxidas DS708 for many years, I love it because of its reasonable price and cost efficient function, but what a pity that it will not be updated any more.

Then you consider to have one Autel Maxidas DS808K full kit which adds extra special functions i.e injector coding, key coding, adaptation, ECU information, trouble codes, freeze frame, live data, active test and special functions. I have one small repair shop and have many different car brands fix, MaxiDAS DS808 can fully meet my requirements.

It has many different vehicles’ diagnostic adapters which are not standard 16pin(see following pic). Maxidas DS808 is compatible to many US, European, Asian vehicles, user friendly and has software for different vehicle models and systems.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-1.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-2.jpg

Its new CPU and LCD touch screen (7″ LCD 1024×600 resolution touch scrren), dramatically improved the entire users’experience, much more smooth comparing with DS708. Personally, I would recommend DS808 for those small shops with limit budgets. Of course, if money is not a problem, Maxisys Elite may be your good choice.It is smaller than ms906, so very handy.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-3.jpg

This is what I got Autel Maxidas DS808 full kit
www.cnautotool.com claims they are the exclusive sales dealer authorized by auteltech. Means lowest price $845 free shipping.

BTW, I am not affiliate with this shop, but a customer.

Next is my Autel Maxidas DS808 tests report:
Program new keys ………Yes
Program the abs module ……..NO (maxisys pro yes)
AutoVIN Technology……….Yes
MaxiFix Cloud-Based Information System ……..yes
Shop Manager ………..yes
Injector coding …….yes
Key coding ……….yes
Many special function works: Oil Reset Service, TPMS Programming Service, EPB Service, ABS/SRS Services, SAS Calibration Service, DPF Regeneration Service

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-4.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-5.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-6.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-7.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-8.jpg

Register Autel Maxidas DS808:

Registering the device was easy. I simply go to autel’s website and set up an account. Once I do that I take the registration code/passcode from the scan tool and register it on the website. I  then make sure that the scan tool is hooked up to my wifi which is setup in settings. Then I am ready to update the scan tool with the latest software.

Update Autel Maxidas DS808:

Make sure the Display Tablet is connected to a power source with stable access to the internet.

Tap the Update application button from the Autel Maxisys Job Menu;or tap the update notification message when received one; or tap the Update icon on Vehicle Menu in Diagnostics application.

The Update application screen displays.

Check all available updates:

If you decide to update all the items, tap the Update All button.

If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).

Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.

When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/11-9.png

Autel MaxiSYS MS906,Autel DS808 which to buy?

As known , this is Autel Maxidas revolution course:

Autel Ds708 scanner -> Autel MaxiSYS MS906-> Autel DS808 standard package-> Autel DS808K full package