Tag Archive: CG PRO

How does CGDI BMW diagnose BMW 3 series E93 successfully?

Confirmed: CGDI BMW adds “BMW diagnosis” to be able to program and code BMW E series; able to read/clear trouble codes for BMW E series, F series, G series.

How to update CGDI BMW diagnosis function for free:

As long as you have any of CG100 or CG PRO or CGDI MB, please provide the serial number for free trial.

For BMW diagnosis: CGDI BMW VS BMW ICOM

1.Easy to use. As long as you are qualified with corresponding vehicle maintenance knowledge, CGDI BMW does not have high requirements for the user’s professional skills and English level.

2.Cheap. CGDI BMW is cheaper than BMW ICOM (clone and original).

BMW ICOM clone & original are able to diagnose, program and code BMW E-series models at higher price (clone: about 400eur).

Besides, BMW ICOM has some requirements for the user’s operating skills during installation, therefore some users will choose a hard disk with pre-installed software and be charged.

3.Menu-driven & automatic operation instead of manual operation, which save much time.

How does CGDI BMW diagnose BMW 3 series E93 successfully?

1.Select “BMW diagnosis”.

series-e93-1

2.It pops up “Whether to scan vehicle quickly”.

Press “Yes” and CGDI BMW will scan the BMW in 30 seconds.

Press “No” and CGDI BMW will scan the BMW all systems and take about 3 minutes.

series-e93-2

3.After selecting “No”.

series-e93-3 series-e93-4

4.It pops up the BMW information.

Have diagnosis options :

Read fault codes, clear fault codes, Clear all codes, Help, back.

It is menu-driven operation, easy to use.

At the left corner, you will see the working status.
series-e93-5 series-e93-6 series-e93-7

5.Back to select “BMW diagnosis”, then “scan vehicle quickly”.

And you will see all trouble codes are cleared, and all are normal.

series-e93-8 series-e93-9 series-e93-10

Don’t you think it is easy to use CGDI BMW Prog for diagnosis?

BMW EWS, CAS, FEM Add Keys via OBD: CG Pro? CGDI? CG100?

Look here: CG PROCGDI Prog BMW and CG100 – will all these CGDI programmers make key BMW EWS, CAS and FEM?

How to Identify your BMW Immobilizer System?

BMW systems: EWS, CAS, FEM/BDC

EWS: Old cars with keys unfoldable and chips 7935

CAS: CAS1, CAS2, CAS3, CAS3+, CAS4, CAS4+

CAS 1, CAS 2: Old 7 series with semi-smart and smart cards

CAS 2: 520, 530 with keys unfoldable and normal chips ID46

CAS 3:

– Old 3 and 5 series before year 2010: OBD add keys without ECU disassembled (even when all keys are lost)

– Old 3 and 5 series after year 2010: CAS3 is updated and encrypted; have to disassemble an ECU before making keys and system will try 64 times for all keys lost

CAS 4:

New 3, 5 and 7 series before year 2012 with CAS 4 1L15Y and 5M48H;

necessary to disassemble CAS for adding new keys and all keys lost

CAS 4+:

CAS4 is updated to CAS4+ after year 2012, incl. 5M48H and 1N35H;

add new keys with CAS disassembled and a spare key;

all keys lost need find ISN codes from ECU;

FEM:

CAS 4+ on 5 and 7 series (not on 1 and 3 series in the year 2012) is updated to FEM;

CGDI BMW, CG100 and CG Pro all these device can make BMW key?

CGDI BMW:

a definitely YES.  It is a BMW specific key programming tool.  CGDI will program key for BMW EWS1-EWS4, CAS1-CAS4+ and FEM/BDC immo system. Both add key and all keys lost.

CAS1-CAS3+ all done via OBD. EWS, CAS4/CAS4+ and FEM/BDC need to remove and done on bench.

CG Pro 9S12:

cgpro will make key for BMW EWS1-EWS4 and CAS1-CAS4+ (both add key and all keys lost).

All requires to remove the IMMO box.  CG Pro CANNOT do FEM/BDC key programming.

For example: CG-Pro add key BMW CAS4 525Li 5M48H (don’t need other devices)
cg-pro-bmw-525-1 cg-pro-bmw-525-2 cg-pro-bmw-525-3  cg-pro-bmw-525-5 cg-pro-bmw-525-6

CG100 Prog III:

CG100 software does have CAS1-CAS4 options, but can be used to generate BMW key ONLY.  You need to read CAS data by other eeprom programmer, i.e CG Pro, then generate key with CG100.  But in this case, CG Pro will generate key via eeprom data as well.

cg-pro-bmw-525-8

In a nutshell:

CGDI BMW and CG Pro share the same IMMO capacities on EWS, CAS1-CAS4+.  CG Pro requires to remove IMMO box and CGDI BMW can be done by OBD.

CGDI BMW supports FEM/BDC key programming, CG-Pro does not.

CG100 can only generate CAS1-CAS4 key.

Tips: CAS 3, CAS 3 + smart key program

CAS3+ OL15Y OBD add keys when all keys lost:

CAS1 CAS2 CAS3:

OBD add a new key with a spare key or even all keys lost, done without ECU disassembled;

The steps: OBD connection to a BMW car – read key data – save key data – make a dealer key – add a new key

CAS3+ add a spare key or all keys lost:

IMPORTANT: you should know if the CAS3+ is encrypted or not: OBD connection to read key info for it (“encrypted” in sw means the CAS3+ is encrypted)

Method 1: downgrade

The good:

no need disassemble ECU

The bad:

time-consuming, it takes 1 hour around

power-consuming, you should charge the battery for the car and laptop in case that there is no power on the car

Cars: BMW MINI

To downgrade is suitable for some cars that are not easy to disassemble ECU like MINI

Note: you have to remember BMW serial number in the downgrade process in case of disconnection in the middle

Tool: CGDI BMW

SAFE! So, no worries!
cg-pro-bmw-525-8 cg-pro-bmw-525-7
cg-pro-bmw-525-9
CAS3 smart keys:

First disable the original key lost and be sure that only one smart key left before key programming;

If the key is disabled but the new one is not smart, you can re-generate a non-smart key with ID46 chip;

Then disable the other original smart key and the new smart key

Then switch ignition on with the new smart key

Then switch ignition on with the other original smart key

How to Program Porsche Key with CG-Pro 9S12 Programmer

CG Pro 9S12 freescale programmer newly updated Porsche key read& write function for FREE.

How to Program Porsche key with CG-Pro programmer?

Select Model-> IMMO Key Programming

How - to - Program - Porsche - Key - with - 1

Click on “Open folder” and load eeprom data
Insert a blank key into CG-Pro programmer coil, click on “Read key”
Choose key position, then click “Write Key”

How - to - Program - Porsche - Key - with - 2

Select from chip
How - to - Program - Porsche - Key - with - 3

2. NEC

D70F3548

D70F3558

D70F3585

D70F3385

D70F3469

D70F3628

3. Motorola -9S12

How - to - Program - Porsche - Key - with - 4

9S12HA32-0M34S

9S12HY32-0M34S

9S12HA48-0M34S

9S12HY48-0M34S

9S12HA64-0M34S

9S12HY64-0M34S

9S12XHY128-0M23Y

9S12XHY256-0M23Y

9S12HZ128-3L16Y

9S12HZ256-3L16Y

9S12XEP768-4M48H

4. Models->IMMO->Jaguar & Land rover

BCM-XEP768

BCM-XEP100

CG PRO Reset Odometer on a BMW X1 CAS3 2010 M35080

Model: BMW X1

Year: 2010

Instrument type: 35080

Immobilizer: CAS3-0L15Y

Device: CG PRO 9S12 programmer

Purpose: odometer correction

cgpro-bmw-x1-change-mileage-1 cgpro-bmw-x1-change-mileage-2

Original odometer: 191,245 km

Step 1: Remove Dash

Turn off ignition.  Remove and disassemble dashboard instrument
cgpro-bmw-x1-change-mileage-3 cgpro-bmw-x1-change-mileage-4 cgpro-bmw-x1-change-mileage-5 cgpro-bmw-x1-change-mileage-6 cgpro-bmw-x1-change-mileage-7

Locate chip m35080DOWQ

cgpro-bmw-x1-change-mileage-8 cgpro-bmw-x1-change-mileage-9

Step 2: Remove IMMO Box

Remove immo box CAS3-0L15Y

cgpro-bmw-x1-change-mileage-10 cgpro-bmw-x1-change-mileage-11 cgpro-bmw-x1-change-mileage-12 cgpro-bmw-x1-change-mileage-13 cgpro-bmw-x1-change-mileage-14 cgpro-bmw-x1-change-mileage-15

Step 3: Change mileage in dash

Open CGPro software

Solder 080DOWQ chip into CGPRO M35080/35160 adapter

cgpro-bmw-x1-change-mileage-16

Select Model->Adjust mileage->BMW->35080 V1 (080DQ)

cgpro-bmw-x1-change-mileage-17

Choose Adjust mileage function icon and enter mileage you desired

Step 4: Correct odometer in Immobilizer

Connect CAS3 0L15Y eeprom IC chip with CG-Pro DB25 connector

cgpro-bmw-x1-change-mileage-18 cgpro-bmw-x1-change-mileage-19

In CG Pro software, select Chip->Adjust mileage->BMW->CAS3 0L15Y

Manully enter new mileage you desired

Press YES to confirm

cgpro-bmw-x1-change-mileage-20

Both dash and immo mileage reset successfully. Reinstall dashboard and immo box to vehicle.

cgpro-bmw-x1-change-mileage-21