Tag Archive: CGDI Prog BMW MSV80

How does CGDI BMW diagnose BMW 3 series E93 successfully?

Confirmed: CGDI BMW adds “BMW diagnosis” to be able to program and code BMW E series; able to read/clear trouble codes for BMW E series, F series, G series.

How to update CGDI BMW diagnosis function for free:

As long as you have any of CG100 or CG PRO or CGDI MB, please provide the serial number for free trial.

For BMW diagnosis: CGDI BMW VS BMW ICOM

1.Easy to use. As long as you are qualified with corresponding vehicle maintenance knowledge, CGDI BMW does not have high requirements for the user’s professional skills and English level.

2.Cheap. CGDI BMW is cheaper than BMW ICOM (clone and original).

BMW ICOM clone & original are able to diagnose, program and code BMW E-series models at higher price (clone: about 400eur).

Besides, BMW ICOM has some requirements for the user’s operating skills during installation, therefore some users will choose a hard disk with pre-installed software and be charged.

3.Menu-driven & automatic operation instead of manual operation, which save much time.

How does CGDI BMW diagnose BMW 3 series E93 successfully?

1.Select “BMW diagnosis”.

series-e93-1

2.It pops up “Whether to scan vehicle quickly”.

Press “Yes” and CGDI BMW will scan the BMW in 30 seconds.

Press “No” and CGDI BMW will scan the BMW all systems and take about 3 minutes.

series-e93-2

3.After selecting “No”.

series-e93-3 series-e93-4

4.It pops up the BMW information.

Have diagnosis options :

Read fault codes, clear fault codes, Clear all codes, Help, back.

It is menu-driven operation, easy to use.

At the left corner, you will see the working status.
series-e93-5 series-e93-6 series-e93-7

5.Back to select “BMW diagnosis”, then “scan vehicle quickly”.

And you will see all trouble codes are cleared, and all are normal.

series-e93-8 series-e93-9 series-e93-10

Don’t you think it is easy to use CGDI BMW Prog for diagnosis?

CGDI Prog BMW MSV80 programs BMW F010: Works perfectly

Works perfectly

CGDI Prog BMW MSV80 is a good key programmer for BMW users. It not only supports CAS1-CAS4+ key matching, but also supports BMW E/ F Series Program and so on.

Here is the step-by-step guide to program F series with CGDI PROG BMW.

Step 1: Connect CGDI BMW with BMW car& PC

Step 2: Program F010 ECU

In detail…

Step 1: Connect CGDI BMW with BMW car& PC

Connect CGDI BMW Programmer with vehicle via OBD

Connect CGDI BMW to the PC via USB cable

program-bmw-f010-1

Step 2: Program F010 EC

Run CGDI prog BMW software

Go to BMW F/G Series Program -> DME2 (ECU Address: 12) -> Begin Program

program-bmw-f010-2

Prompt: ECU is about to be programmed, please ensure that car battery has enough power, the programming process, please keep the equipment cable connection.

Then press “YES”

program-bmw-f010-3

Note: Whether to backup coding data?

Click “YES”

Confirm if the following VIN is correct, and modify it in text box below if VIN not correct

program-bmw-f010-4

Programming the BMW ECU…

(It needs about 5mins)

program-bmw-f010-5

Prompt: Programming success

If you did not code after programming, please enter the “BMW F/G series coding” function to set the code, please ignore it when some modules (such as gateway) do not need to set the code.

Press OK

program-bmw-f010-6

Turn on the ignition switch, works well.

Job’s done!

Programmation de clés intelligentes BMW CAS3 / CAS3 +: avec une clé de rechange et toutes les clés perdues

Programmeur de l’ICDG et BMW CAS3 ou CAS3 +: ?a marche ou pas?

Voici…

Quelle BMW est livrée avec CAS3:

– Anciennes séries 3 et 5 avant l’année 2010: OBD ajoute des clés sans calculateur démonté (même lorsque toutes les clés sont perdues)

– Anciennes séries 3 et 5 après 2010: la CAS3 est mise à jour et cryptée; désassembler un calculateur avant de créer des clés et le système essaiera 64 fois pour toutes les clés perdues

A quoi ressemble la clé CAS3:

Programmation  –  de  –   1

CAS3 clé intelligente 3 boutons 433MHZ (entrée sans clé) PCF7952

Clé intelligente CAS3 pour BMW 3 boutons  315MHZ (Keyless-entry) PCF7952

CAS3 clé intelligente 3 boutons pour BMW 868MHZ  (Keyless-entry) PCF7952

Comment faire un programme de touches intelligentes CAS 3 ou CAS 3 + :

CAS3 + OL15Y OBD ajoute des clés lorsque toutes les clés sont perdues:

CAS1 CAS2 CAS3:

OBD ajoute une nouvelle clé avec une clé de secours ou même la perte de toutes les clés, sans démonter le calculateur;

Les étapes: connexion OBD à une voiture BMW – lecture des données de clé – sauvegarde des données de clé – création d’une clé de concessionnaire – ajout d’une nouvelle clé

CAS3 + ajouter une clé de secours ou toutes les clés perdues:

IMPORTANT: vous devez savoir si le CAS3 + est crypté ou non: la connexion OBD lui permet de lire les informations de clé (?crypté? en sw signifie que le CAS3 + est crypté)

Méthode 1: déclasser

Le bon:

pas besoin de démonter l’ECU

Le mauvais:

prend du temps, il faut 1 heure environ

Consommation d’énergie, vous devez charger la batterie de la voiture et de l’ordinateur portable au cas où la voiture ne serait pas alimentée

Voitures: BMW MINI

Pour rétrograder est approprié pour certaines voitures qui ne sont pas faciles à démonter ECU comme MINI

Remarque: vous devez vous rappeler le numéro de série BMW lors du processus de rétrogradation en cas de déconnexion au milieu.

Outil: CGDI BMW

S?R! Alors, pas de soucis!

Programmation  –  de  –  2

Programmation  –  de  –  3

Touches intelligentes CAS3:

Commencez par désactiver la clé d’origine perdue et assurez-vous qu’il ne reste qu’une clé intelligente avant la programmation de la clé;

Si la clé est désactivée mais que la nouvelle n’est pas intelligente, vous pouvez générer de nouveau une clé non intelligente avec une puce ID46.

Puis désactivez l’autre clé intelligente d’origine et la nouvelle clé intelligente

Puis mettez le contact avec la nouvelle clé intelligente

Puis mettez le contact avec l’autre clé intelligente d’origine

CGDI Prog BMW and Mercedes Key Programmer Test Report & Video

CGDI Prog MB Mercedes and CGDI Prog BMW are two different tools from the company whom manufactured CG100 airbag reset tool.   How they works? See the test reports with photos and videos.

CGDI Prog BMW

CGDI Prog MB Mercedes

CGDI Prog BMW

CGDI BMW Prog Program BMW CAS3 keys

CGDI Prog read BMW CAS3 ISN by OBD

CGDI Prog BMW read MSD85 80 Ecu engine ISN code by OBD

CGDI Prog BMW Program BMW F30 F31 FEM Key

CGDI Prog BMW program FEM BMW F30 328 2013

CGDI Prog Mini cooper R56 cas3+ all key lost

CGDI Prog BMW program X6 BDC key via OBD

CGDI BMW program 5 series CAS4+ key success

CGDI-Prog-MB-W212-all-key-lost-FBS3-6

BMW 325 key added done. Pls update CGDI BMW to latest version if you need to do CAS 9389115  version

CGDI-Prog-MB-W212-all-key-lost-FBS3-7

How to read MSV80 by CGDI Prog BMW Key Programmer

CGDI BMW adds BMW X3 spare key by OBD success

CGDI-Prog-MB-W212-all-key-lost-FBS3-8 CGDI-Prog-MB-W212-all-key-lost-FBS3-9 CGDI-Prog-MB-W212-all-key-lost-FBS3-10

CGDI Program BMW M4 FEM smart key success

CGDI-Prog-MB-W212-all-key-lost-FBS3-11 CGDI-Prog-MB-W212-all-key-lost-FBS3-12 CGDI-Prog-MB-W212-all-key-lost-FBS3-13 CGDI-Prog-MB-W212-all-key-lost-FBS3-14 CGDI-Prog-MB-W212-all-key-lost-FBS3-15

CGDI Prog BMW add key to a 2016 BMW X5 successfully
CGDI-Prog-MB-W212-all-key-lost-FBS3-16 CGDI-Prog-MB-W212-all-key-lost-FBS3-17

CGDI Prog BMW program key to 2016 BMW 5-Series
CGDI-Prog-MB-W212-all-key-lost-FBS3-18 CGDI-Prog-MB-W212-all-key-lost-FBS3-19 CGDI-Prog-MB-W212-all-key-lost-FBS3-20

CGDI Prog BMW program key to BMW 523Li

CGDI-Prog-MB-W212-all-key-lost-FBS3-21 CGDI-Prog-MB-W212-all-key-lost-FBS3-22 CGDI-Prog-MB-W212-all-key-lost-FBS3-23 CGDI-Prog-MB-W212-all-key-lost-FBS3-24 CGDI-Prog-MB-W212-all-key-lost-FBS3-25
CGDI Prog BMW FEM all key lost: Done!

In conclusion,

1). CGDI PROG BMW is able to add new keys to BMW CAS1/CAS2/CAS3/CAS3+, CAS4/CAS4+ ,FEM/BDC and program keys/all keys lost,

CAS computer replace,

CAS3+/P4X or newer version can directly downgraded by OBD in 5 minutes 100% safety.

2). support BMW key inspection, check key status

3). support BMW engine computer DME replacement.

4).  support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)

5).  support BMW key unlock.

CGDI Prog MB Mercedes Key Programmer

CGDI Prog MB program key to Benz C260: Success
CGDI-Prog-MB-W212-all-key-lost-FBS3-28 CGDI-Prog-MB-W212-all-key-lost-FBS3-29 CGDI-Prog-MB-W212-all-key-lost-FBS3-30

CGDI MB Prog Mercedes S350 4Matic add key success
CGDI-Prog-MB-W212-all-key-lost-FBS3-31 CGDI-Prog-MB-W212-all-key-lost-FBS3-32 CGDI-Prog-MB-W212-all-key-lost-FBS3-33 CGDI-Prog-MB-W212-all-key-lost-FBS3-34

CGDI Prog MB do W166 W211 A166 all key lost

CGDI Prog MB program W221 key: (as good as VVDI MB Tool)

Mercedes E206  2011 year key added done by CGDI MB, fast done
CGDI-Prog-MB-W212-all-key-lost-FBS3-37

CGDI Prog MB Program W212 EL200 all key lost FBS3: Done!

CGDI-Prog-MB-W212-all-key-lost-FBS3-38

Added SLK200 key by CGDI MB !super fast !

CGDI-Prog-MB-W212-all-key-lost-FBS3-39

CGDI Prog MB W204 read EZS and program all keys lost

CGDI Prog MB Read Write Erase W220 BE Key

CGDI Prog MB Read EZS & Calculate Password W220 2006

CGDI MB Prog add Mercedes w221 2010 Facelift S600 Key

CGDI MB E250 2010 e250 petrol read ezs by obd calculate keys online read original key

In summary,

1). CGDI PROG MB can add a key to Mercedes-Benz faster than other VVDI MB key programmer:

data acquisition/collection time: 1’50s

password calculation time: 40s

99% success get password for one time calculator

it is the fastest key programming tool to calculate the password at present.
2). program a new key when MB lost all keys:

support models including 211,209,204,207,212,166,246,197,172,164 +, 216

3). Free 2 tokens to calculate the password each day within 6 months

4). work as good as VVDI MB TOOL, but have a better price.

How to choose a BMW FEM Key Programmer for F-series FEM System

How TO identify what F series BMW is using CAS4 and what F series BMW use FEM?

FEM: 1 / x1 / 2 / 3 / 4 series
CAS4: X3 / X4 / 5 / 6 / 7 series

What a working tool to program Smart Key to F-series with FEM module?

1)

Yanhua BMW FEM Key Programmer:

1. Update Online

2. Supports offline operation, safe and stable, easy-to-use

3. Supports latest FEM system vehicles till 2017

4. No tokens needed
Yanhua BMW-FEM Key Programmer Support BMW F-chassis Car List:

1 Series             F20/F21                            2011-2017
2 Series             F22/F23/F45/F46            2014-2017
3 Series/GT       F34/F35                            2012-2017
4 Series             F30/F31/F32/F33/F36     2014-2017
X5                       F15                                     2014-2017
X6                       F16                                     2015-2017

2)

BMW Explorer since version 14.05.08 allows users to program ignition key for FEM / BDC

Key programming into FEM / BDC is divided into several stages
1 Preparation of FEM / BDC thru OBD
2 Preparation of FEM / BDC using programmer (Reading BACKUP)
3 Programming FEM / BDC with BMW-Explorer via OBD
4 Write back BACKUP with the programmer
5 Key programming thru OBD

Paragraph 1:
It is necessary to perform a quick test , go to the FEM / BDC and click the “Key learning” button,
The program will check for a supported version of the unit, prepare the unit for the next procedure, and will display the message “Read Eeprom and upload in calc“.

Paragraph 2:
Remove the FEM / BDC unit as described HERE. Disassemble the FEM / BDC unit as described in THIS SECTION.
Read 95128/95256 Eeprom (pictured in the upper right corner) using programmer
(Orange Xprog or others that supports Eeprom 95128/95256).
Download Eeprom into BMW-Explorer, and save EEprom and write it back into the FEM / BDC.

Paragraph 3:
Install the unit on the car in the reverse order of removal, and connect BMW-Explorer via OBD.
The car probably will not respond to the key, do not get scared!
Connect to FEM, press “Reset mileage”, Explorer will propose to program the FEM / BDC, agree and wait for the programming to finish.
After successful programming, the program will write to you “Return the saved original Eeprom”, then remove FEM again and using programmer, return the previously read contents of EEprom 95128/95256. Then you can install the unit back to the car.

Sometimes it is possible that after the last manipulation the FEM / BDC will stop responding to the diagnostics, then you need to flash this EEprom into the unit and program the unit with Esys or ISTA-P and start the unit preparation from step 1.
P.S: Follow the instructions and save your time.

Paragraph 4:
Connect to the FEM / BDC control unit using the BMW-explorer, press “Extra options” then “Key learning”. Key programming window will open and will read the key data we need for programming.
If you have a working key, then you need to bring it to the emergency coil as pictured below and press the “Read crypto key” button.
About successful reading of the “Crypto” BMW-Explorer show “Crypto Ok” message.
If you do not have a working key, then you need to read the ISN from the DME and enter it into the “ISN from DME” window.
You can also enter 8 bytes of the “crypto” manually.
Now you can start to learn keys. To do this we must select a free track for the key and press “Learn key”, bring a new key to the emergency coil on the steering column.

Here is a video demo guide on 2015 BMW 328 F34 FEM key Programming by using BMW Explorer.

3):

Xhorse VVDI2 key programmer to cover FEM+bdc key programming adding on all BMW Fxx series after version  V4.3.0 authorization to be offered.

Here is the step-by-step instruction on using VVDI2 to program BMW/BDC keys.

How to use VVDI2 for BMW FEM/BDC programming

4) CGDI Prog BMW MSV80 Key Programmer

FEM/BDC key programmer function is added to CGDI Prog key programmer (Aug. 2017)! Now the device supports BMW CAS1,CAS2,CAS3 CAS4 /CAS 4+/FEM/BDC key programming/all keys lost , you can pay 175USD for the FEM/BDC authorization.

k518-bmw-fem-1

5) Lonsdor K518ISE key programmer

Lonsdor K518ISE adds BMW FEM/BDC system key programming for FREE on October 27, 2017.

k518-bmw-fem-2

BMW F35 N20 Adapt the ECU Donor with CGDI BMW

CGDI Prog BMW adds  “BMW data Modify” function which is used for adapt the ecu donor. Its simple to do.

cgdi-bmw-data-modify-1

Engine Model example: BMW F35 N20 engine

Procedure:

1.Read EEPROM Data in engine ECU with CGDI BMW or CG Pro 9S12 programmer

N20 engine physical wiring connection to CG Pro/CGDI BMW

cgdi-bmw-data-modify-2

cgdi-bmw-data-modify-3

Read and save enginee EEPROM data

2. Go to CGDI BMW software

Select BMW data modify function

cgdi-bmw-data-modify-4 cgdi-bmw-data-modify-5

Choose engine Type: N20 and Load Data read by CG Pro

cgdi-bmw-data-modify-6

3. Manualy enter the VIN and ISN you want and save the new data.

cgdi-bmw-data-modify-7 cgdi-bmw-data-modify-8

4. Write the new generated data to the engine with CG100 or CGPRO.

Read BMW MSV80 ISN with VVDI2 or CGDI Prog?

Confirmed! Both XHORSE VVDI2 and CGDI Prog are able to read BMW ISN codes from the MSV80.

In details…

Option 1: Xhorse VVDI2 BMW read MSV80 ISN codes

Option 2: CGDI Prog BMW read ISN from MSV80

Option 1: VVDI2 4.9.0 read MSV80 ISN no issues

Go to Key Learn, then select ECU ISN

Select Type: MSV80, then Read ECU information

VVDI2-BMW-ISN-from-MSV80-and MEVD17-1

This is ECU info

VVDI2-BMW-ISN-from-MSV80-and MEVD17-2

Recommend: Connect extra power to the car

Need 8 minutes

VVDI2-BMW-ISN-from-MSV80-and MEVD17-3

Reading ISN…
VVDI2-BMW-ISN-from-MSV80-and MEVD17-4 VVDI2-BMW-ISN-from-MSV80-and MEVD17-5

Read ISN from ECU successfully

VVDI2-BMW-ISN-from-MSV80-and MEVD17-6 VVDI2-BMW-ISN-from-MSV80-and MEVD17-7 VVDI2-BMW-ISN-from-MSV80-and MEVD17-8

Job’s done.

Option 2: CGDI Prog read BMW ISN from MSV80 successfully
VVDI2-BMW-ISN-from-MSV80-and MEVD17-9
Method 1: can read directly ISN code in the car,please make sure car voltage is 12V above,directly connect OBD to operate–time about 5 minutes.

VVDI2-BMW-ISN-from-MSV80-and MEVD17-10 VVDI2-BMW-ISN-from-MSV80-and MEVD17-11

Methods 2: can directly split engine computer (DME) to operate–connect diagram as follows:
VVDI2-BMW-ISN-from-MSV80-and MEVD17-12

Review on CGDI Prog MB Benz Car Key Programmer

I used CGDI BMW MB for three months. I am very pleased to share related information with you.

Based on my experience, I have to say CGDI MB is a powerful auto key programming tool, which can calculate the password fast at present.

Purchased CGDI off cardiagtool. It cost me €640.00 with free shipping via DHL.

Software version:

V2.8.1.0 (updated on Dec.2018)

Operating system:

Windows 7

Setup:

It’s very easy to install cgdi software. You will use it quickly.

Activation:

After you receive the CGDI PROG MB, you need to activate it by the following guide below.

Download Benz Monster software from official website http://www.cgprogcar.com/?langid=en, there will be user manual in the software catalogue
2. Install software on your laptop (It can work on Windows 7/8/10), activate device yourself from menu Online Store.
Send the serial number to customer service to active your CGDI.
After finishing activation, restart CGDI Benz and the Benz Monster software.

Tokens:

CGDI PROG MB needs tokens for password calculation.

Plan A: Two free tokens can be used every day for 180 days. You need to subscribe CGDI MB 180-Day Tokens when the license gets expired.

After you pay for it, It can calculate online twice free every day again.

Plan B: One free token every day all the time. It won’t get expired anymore. If you want to get more tokens, you need to pay 5 usd each token.

Features:

Calculate the password online
Work with BE keys and original keys
Support Benz all key lost: models including 211, 209,204, 207, 212, 166,246,197,172,164+, 216 etc.
Run fast when adding keys to Mercedes: collection time 1’50s, password calculation time 40s, 99% get password for one time calculator

EIS/EZS Functions:

Can read EIS data via OBD, no need to distinguish the EIS/EZS model.
Can display the key status and directly disable the key position.
Can display EIS Number, can distinguish the Benz model
Can display EIS status.
Automatically identify EIS model.
Automatically identify CAN protocol

Key data generation:

Can generate the key data of HC05/908/912/9S12/NEC EIS/EZS
Time: 26 seconds
Format: 41/51 (41 format is smart key data)

Infrared Key:

Can directly read key pin code via infrared on parts of 209/211/220/215 EIS.
Can read/write EIS via infrared.

Vehicles supported:

Mercedes-Benz A series (2004 -)
Mercedes-Benz B series (2005-)
Mercedes-Benz C Series (2001 – , including 210)
Mercedes-Benz E Series (2001-, including 203)
Mercedes-Benz CL series (2001-)
Mercedes-Benz GLK (2004-)
Mercedes-Benz ML series (2003 -)
Mercedes-Benz R series  (2003 -)
Mercedes-Benz G series (2003 -)
Mercedes-Benz S Series (2001 -, including 220)
Mercedes-Benz SLK  (2003- )
Mercedes-Benz SLS (2004 -)
Mercedes-Benz Vito (2003-)
Mercedes-Benz Sprinter (2003 -)
Mercedes-Benz Vito (2003 -)

CGDI MB Software Display:

EIS

Auto - computer -1

Key read and write

Auto - computer -2

Computer password

Auto - computer -3

EE generation

Auto - computer -4

Auto computer

Auto - computer -5

ELV

Auto - computer -6

How to Program BMW CAS4+ All Key Lost by CGDI BMW

How to Program BMW CAS4+ All Key Lost by CGDI BMW

This article I want to show you how to program new keys for BMW CAS4+ all key lost by CGDI BMW Programmer.Hope it helps!

Devices You Need?

CGDI BMW Programmer

CGDI Pro 9S12

CG-100 Prog

Procedures:

Step 1:Read CAS4+ Immobilizer Data

Remove CAS4+ module from vehicle

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-1-1

Disassemble cover and take out PCB

 

Run CG Pro software,and follow the software wire connection diagram to build connection between CG Pro 9S12 and CAS4+ module

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-3
How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-4
How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-5

Operate CG Pro software to read out and decrypt immo data,then save the data on your laptop

Note:Don’t forget to make backup before operation.

Step 2:CG-100 read ECU data

Run CG-100 software,and select “ECU”

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-6

Select “BMW E series”à” MEVD1724(N20)”

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-7

Then follow the software wire diagram to connect CG-100 to MEVD1724(N20) ECU

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-8-

Click “Read EEPROM”

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-9

After reading ECU data successfully,save the ECU data file on your laptop.

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-10

CG-100 will show ISN and VIN

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-11

Note:CG-100 full version support this function.

Step 3:CGDI BMW Program Keys

Connect CGDI BMW to laptop and run CGDI BMW software and select “CAS4 Key Match”

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-12

Select “Load CAS Data”

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-13

Note select the immo data you save on step 1 to load

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-14

Then CGDI BMW software will show relevant information

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-15

Select the key position that need to be configured,then click “Generate dealer key”,and the select the way to input “ISN” code,here select “With the engine data,the next step is to load the engine data”

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-16

Now load the ISN file you saved in step 2

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-17

Input a blank key into CGDI BMW slot,and click “OK” to start programming

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-20 porsche-piwis-3-download-18

After programming successfully,it will prompt you new key programming successfully.

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-19

To end by test this new key on your BMW.

How-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMWHow-to-Program-BMW-CAS4+-All-Key-Lost-by-CGDI-BMW-20

UOBDII Official Blog All rights reserved How to Program BMW CAS4+ All Key Lost by CGDI BMW

Auto Key Programmer CGDI for BMW CAS4 to choose

5-1

CGDI Prog BMW MSV80 is a powerful auto key programmer, which to do BMW cars.BMW CGDI MSV80 could do BWM on Auto Scanner Tools, key programming security maintenance.

CGDI Prog has below functionalities:

1.BMW CAS1/CAS2/CAS3/CAS3+/: can match spare key, KEY all lost matching, CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/: can perform key matching and support key all lost matching.

3.Support BMW key inspection, can check key what status in.

4.Support BMW engine computer DME replacement.

5. Support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)

6. Support BMW key unlock.

Besides key programming, CGDI Prog BMW MSV80 can perform:

1. auto diagnosis, and security maintenance.

2. BMW CAS3/CAS3+Data repair–support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine

change computer, ISN code reading and writing.

CGDI Prog Update online:

Newest software version: V1.0.02

Update online 6-month free update after activating device, after that it costs 10.00USD/Month.

Free update software:

001: CAS

002: CAS4

CAS4+ 003: Engine EME

CGDI Prog Key Programmer is reliable or not?

1. Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.

2. has new breakthrough in operation safety and technical support.

3. Warranty:1 year

How to use CGDI on BMW MSV80 vehicle?

via OBD: can directly read ISN code in the car, please confirm you have 12V or above car voltage, it directly connects OBD to operate, take about 5 minus.

Disassemble DME: can directly disassemble engine computer (DME) to operate, follow the below guide to connect the line.

CGDI Prog user manual:

http://www.cnautotool.com/goods-6613-CGDI+Prog+BMW+MSV80+Car+Key+Programmer+for+BMW+CAS1CAS2CAS3CAS3C.html

Go and see our website:www.cnautotool.com