Tag Archive: CGDI Prog

How does CGDI BMW diagnose BMW 3 series E93 successfully?

Confirmed: CGDI BMW adds “BMW diagnosis” to be able to program and code BMW E series; able to read/clear trouble codes for BMW E series, F series, G series.

How to update CGDI BMW diagnosis function for free:

As long as you have any of CG100 or CG PRO or CGDI MB, please provide the serial number for free trial.

For BMW diagnosis: CGDI BMW VS BMW ICOM

1.Easy to use. As long as you are qualified with corresponding vehicle maintenance knowledge, CGDI BMW does not have high requirements for the user’s professional skills and English level.

2.Cheap. CGDI BMW is cheaper than BMW ICOM (clone and original).

BMW ICOM clone & original are able to diagnose, program and code BMW E-series models at higher price (clone: about 400eur).

Besides, BMW ICOM has some requirements for the user’s operating skills during installation, therefore some users will choose a hard disk with pre-installed software and be charged.

3.Menu-driven & automatic operation instead of manual operation, which save much time.

How does CGDI BMW diagnose BMW 3 series E93 successfully?

1.Select “BMW diagnosis”.

series-e93-1

2.It pops up “Whether to scan vehicle quickly”.

Press “Yes” and CGDI BMW will scan the BMW in 30 seconds.

Press “No” and CGDI BMW will scan the BMW all systems and take about 3 minutes.

series-e93-2

3.After selecting “No”.

series-e93-3 series-e93-4

4.It pops up the BMW information.

Have diagnosis options :

Read fault codes, clear fault codes, Clear all codes, Help, back.

It is menu-driven operation, easy to use.

At the left corner, you will see the working status.
series-e93-5 series-e93-6 series-e93-7

5.Back to select “BMW diagnosis”, then “scan vehicle quickly”.

And you will see all trouble codes are cleared, and all are normal.

series-e93-8 series-e93-9 series-e93-10

Don’t you think it is easy to use CGDI BMW Prog for diagnosis?

CGDI Prog BMW MSV80 programs BMW F010: Works perfectly

Works perfectly

CGDI Prog BMW MSV80 is a good key programmer for BMW users. It not only supports CAS1-CAS4+ key matching, but also supports BMW E/ F Series Program and so on.

Here is the step-by-step guide to program F series with CGDI PROG BMW.

Step 1: Connect CGDI BMW with BMW car& PC

Step 2: Program F010 ECU

In detail…

Step 1: Connect CGDI BMW with BMW car& PC

Connect CGDI BMW Programmer with vehicle via OBD

Connect CGDI BMW to the PC via USB cable

program-bmw-f010-1

Step 2: Program F010 EC

Run CGDI prog BMW software

Go to BMW F/G Series Program -> DME2 (ECU Address: 12) -> Begin Program

program-bmw-f010-2

Prompt: ECU is about to be programmed, please ensure that car battery has enough power, the programming process, please keep the equipment cable connection.

Then press “YES”

program-bmw-f010-3

Note: Whether to backup coding data?

Click “YES”

Confirm if the following VIN is correct, and modify it in text box below if VIN not correct

program-bmw-f010-4

Programming the BMW ECU…

(It needs about 5mins)

program-bmw-f010-5

Prompt: Programming success

If you did not code after programming, please enter the “BMW F/G series coding” function to set the code, please ignore it when some modules (such as gateway) do not need to set the code.

Press OK

program-bmw-f010-6

Turn on the ignition switch, works well.

Job’s done!

How to Activate CGDI Prog MB (2019 New Activation Guide)

Users should download CGDI software and provide device Serial Number to activate the CGDI Prog MB in the past.  But now CGDI has changed the activation method.

How to activate CGDI MB key programmer?

activate-cg

cg-pro-bmw-525-9
1). Open CGDI MB software, select “Online Store” tab

activate-cgdi-mb-2

2) The next screen will prompt device activation status. This device has not been activated.

Select service version: Basic version or Advanced version.

Basic Edition:

Only 1 password calculation per day.

Activation will receive a free subscription service for 12 months, free renewal.

Advanced Edition:

Users enjoy 2 password calculations per day

Activation will receive a free subscription service for 6 months, renewal 50 yuan/month.

activate-cgdi-mb-3

3). Select the version you desired. Press “Activate”

Note: Once select your version. It cannot be changed after activation. I.e The basic version cannot be changed to advanced version.

Programmation de clés intelligentes BMW CAS3 / CAS3 +: avec une clé de rechange et toutes les clés perdues

Programmeur de l’ICDG et BMW CAS3 ou CAS3 +: ?a marche ou pas?

Voici…

Quelle BMW est livrée avec CAS3:

– Anciennes séries 3 et 5 avant l’année 2010: OBD ajoute des clés sans calculateur démonté (même lorsque toutes les clés sont perdues)

– Anciennes séries 3 et 5 après 2010: la CAS3 est mise à jour et cryptée; désassembler un calculateur avant de créer des clés et le système essaiera 64 fois pour toutes les clés perdues

A quoi ressemble la clé CAS3:

Programmation  –  de  –   1

CAS3 clé intelligente 3 boutons 433MHZ (entrée sans clé) PCF7952

Clé intelligente CAS3 pour BMW 3 boutons  315MHZ (Keyless-entry) PCF7952

CAS3 clé intelligente 3 boutons pour BMW 868MHZ  (Keyless-entry) PCF7952

Comment faire un programme de touches intelligentes CAS 3 ou CAS 3 + :

CAS3 + OL15Y OBD ajoute des clés lorsque toutes les clés sont perdues:

CAS1 CAS2 CAS3:

OBD ajoute une nouvelle clé avec une clé de secours ou même la perte de toutes les clés, sans démonter le calculateur;

Les étapes: connexion OBD à une voiture BMW – lecture des données de clé – sauvegarde des données de clé – création d’une clé de concessionnaire – ajout d’une nouvelle clé

CAS3 + ajouter une clé de secours ou toutes les clés perdues:

IMPORTANT: vous devez savoir si le CAS3 + est crypté ou non: la connexion OBD lui permet de lire les informations de clé (?crypté? en sw signifie que le CAS3 + est crypté)

Méthode 1: déclasser

Le bon:

pas besoin de démonter l’ECU

Le mauvais:

prend du temps, il faut 1 heure environ

Consommation d’énergie, vous devez charger la batterie de la voiture et de l’ordinateur portable au cas où la voiture ne serait pas alimentée

Voitures: BMW MINI

Pour rétrograder est approprié pour certaines voitures qui ne sont pas faciles à démonter ECU comme MINI

Remarque: vous devez vous rappeler le numéro de série BMW lors du processus de rétrogradation en cas de déconnexion au milieu.

Outil: CGDI BMW

S?R! Alors, pas de soucis!

Programmation  –  de  –  2

Programmation  –  de  –  3

Touches intelligentes CAS3:

Commencez par désactiver la clé d’origine perdue et assurez-vous qu’il ne reste qu’une clé intelligente avant la programmation de la clé;

Si la clé est désactivée mais que la nouvelle n’est pas intelligente, vous pouvez générer de nouveau une clé non intelligente avec une puce ID46.

Puis désactivez l’autre clé intelligente d’origine et la nouvelle clé intelligente

Puis mettez le contact avec la nouvelle clé intelligente

Puis mettez le contact avec l’autre clé intelligente d’origine

CGDI Prog BMW and Mercedes Key Programmer Test Report & Video

CGDI Prog MB Mercedes and CGDI Prog BMW are two different tools from the company whom manufactured CG100 airbag reset tool.   How they works? See the test reports with photos and videos.

CGDI Prog BMW

CGDI Prog MB Mercedes

CGDI Prog BMW

CGDI BMW Prog Program BMW CAS3 keys

CGDI Prog read BMW CAS3 ISN by OBD

CGDI Prog BMW read MSD85 80 Ecu engine ISN code by OBD

CGDI Prog BMW Program BMW F30 F31 FEM Key

CGDI Prog BMW program FEM BMW F30 328 2013

CGDI Prog Mini cooper R56 cas3+ all key lost

CGDI Prog BMW program X6 BDC key via OBD

CGDI BMW program 5 series CAS4+ key success

CGDI-Prog-MB-W212-all-key-lost-FBS3-6

BMW 325 key added done. Pls update CGDI BMW to latest version if you need to do CAS 9389115  version

CGDI-Prog-MB-W212-all-key-lost-FBS3-7

How to read MSV80 by CGDI Prog BMW Key Programmer

CGDI BMW adds BMW X3 spare key by OBD success

CGDI-Prog-MB-W212-all-key-lost-FBS3-8 CGDI-Prog-MB-W212-all-key-lost-FBS3-9 CGDI-Prog-MB-W212-all-key-lost-FBS3-10

CGDI Program BMW M4 FEM smart key success

CGDI-Prog-MB-W212-all-key-lost-FBS3-11 CGDI-Prog-MB-W212-all-key-lost-FBS3-12 CGDI-Prog-MB-W212-all-key-lost-FBS3-13 CGDI-Prog-MB-W212-all-key-lost-FBS3-14 CGDI-Prog-MB-W212-all-key-lost-FBS3-15

CGDI Prog BMW add key to a 2016 BMW X5 successfully
CGDI-Prog-MB-W212-all-key-lost-FBS3-16 CGDI-Prog-MB-W212-all-key-lost-FBS3-17

CGDI Prog BMW program key to 2016 BMW 5-Series
CGDI-Prog-MB-W212-all-key-lost-FBS3-18 CGDI-Prog-MB-W212-all-key-lost-FBS3-19 CGDI-Prog-MB-W212-all-key-lost-FBS3-20

CGDI Prog BMW program key to BMW 523Li

CGDI-Prog-MB-W212-all-key-lost-FBS3-21 CGDI-Prog-MB-W212-all-key-lost-FBS3-22 CGDI-Prog-MB-W212-all-key-lost-FBS3-23 CGDI-Prog-MB-W212-all-key-lost-FBS3-24 CGDI-Prog-MB-W212-all-key-lost-FBS3-25
CGDI Prog BMW FEM all key lost: Done!

In conclusion,

1). CGDI PROG BMW is able to add new keys to BMW CAS1/CAS2/CAS3/CAS3+, CAS4/CAS4+ ,FEM/BDC and program keys/all keys lost,

CAS computer replace,

CAS3+/P4X or newer version can directly downgraded by OBD in 5 minutes 100% safety.

2). support BMW key inspection, check key status

3). support BMW engine computer DME replacement.

4).  support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)

5).  support BMW key unlock.

CGDI Prog MB Mercedes Key Programmer

CGDI Prog MB program key to Benz C260: Success
CGDI-Prog-MB-W212-all-key-lost-FBS3-28 CGDI-Prog-MB-W212-all-key-lost-FBS3-29 CGDI-Prog-MB-W212-all-key-lost-FBS3-30

CGDI MB Prog Mercedes S350 4Matic add key success
CGDI-Prog-MB-W212-all-key-lost-FBS3-31 CGDI-Prog-MB-W212-all-key-lost-FBS3-32 CGDI-Prog-MB-W212-all-key-lost-FBS3-33 CGDI-Prog-MB-W212-all-key-lost-FBS3-34

CGDI Prog MB do W166 W211 A166 all key lost

CGDI Prog MB program W221 key: (as good as VVDI MB Tool)

Mercedes E206  2011 year key added done by CGDI MB, fast done
CGDI-Prog-MB-W212-all-key-lost-FBS3-37

CGDI Prog MB Program W212 EL200 all key lost FBS3: Done!

CGDI-Prog-MB-W212-all-key-lost-FBS3-38

Added SLK200 key by CGDI MB !super fast !

CGDI-Prog-MB-W212-all-key-lost-FBS3-39

CGDI Prog MB W204 read EZS and program all keys lost

CGDI Prog MB Read Write Erase W220 BE Key

CGDI Prog MB Read EZS & Calculate Password W220 2006

CGDI MB Prog add Mercedes w221 2010 Facelift S600 Key

CGDI MB E250 2010 e250 petrol read ezs by obd calculate keys online read original key

In summary,

1). CGDI PROG MB can add a key to Mercedes-Benz faster than other VVDI MB key programmer:

data acquisition/collection time: 1’50s

password calculation time: 40s

99% success get password for one time calculator

it is the fastest key programming tool to calculate the password at present.
2). program a new key when MB lost all keys:

support models including 211,209,204,207,212,166,246,197,172,164 +, 216

3). Free 2 tokens to calculate the password each day within 6 months

4). work as good as VVDI MB TOOL, but have a better price.

How to use CGDI Prog MB Mercedes Benz Key Programmer

2017 new CGDI Prog MB is the fastest key programming tool to calculate Mercedes password and add key at present. Here is the user manual of CGDI MB key programmer.

MB - Mercedes - Benz - 1

Main Function:

1.Add a MB key or do all key lost: support models including 211,209,204,207,212,166,246,197,172,164+, 216

2. Fastest Benz Car key add: collection time 1’50s, password calculation time 40s, 99% get password for one time calculator

Workable Benz Car Model:
Mercedes-Benz A series (2004 -)
Mercedes-Benz B series (2005-)
Mercedes-Benz C Series (2001 – , including 210)
Mercedes-Benz E Series (2001-, including 203)
Mercedes-Benz CL series (2001-)
Mercedes-Benz GLK (2004-)
Mercedes-Benz ML series (2003 -)
Mercedes-Benz R series  (2003 -)
Mercedes-Benz G series (2003 -)
Mercedes-Benz S Series (2001 -, including 220)
Mercedes-Benz SLK  (2003- )
Mercedes-Benz SLS (2004 -)
Mercedes-Benz Vito (2003-)
Mercedes-Benz Sprinter (2003 -)
Mercedes-Benz Vito (2003 -)

EIS/EZS Function:
1). Can read EIS data via OBD, no need to distinguish the EIS/EZS model.
2). Can display the key status and directly disable the key position.
3). Can display EIS Number, can distinguish the Benz model
4). Can display EIS status.
5). Automatically identify EIS model.
6). Automatically identify CAN protocol

Programming Key Features:
1). Automatically identify the basic key information (including how many times you used SSID)
2). Can directly read pin code of BE keys via infrared, can erase BE keys.
3). NEC adapter can write the original Benz smart key and common key.
4). Can write the Benz original key via infrared.
5). Can restore the data of key and EIS with the key password.

Generate the Key Data:
1) Can generate the key data of HC05/908/912/9S12/NEC EIS/EZS
2) Time: 26 seconds
3) Format: 11/ 41/51 (41 format is smart key data)

Infrared Key Function:
1) Can directly read key pin code via infrared on parts of 209/211/220/215 EIS.
2)Can read/write EIS via infrared.

CGDI Prog MB Key Programmer User Manual

How to use CGDI Prog MB Key Programmer?

Lock (EIS)

MB - Mercedes - Benz -2

Read EIS data

MB - Mercedes - Benz -3

Calculate password

Copy key with key

MB - Mercedes - Benz -4 MB - Mercedes - Benz -5

Please insert key into EIS and click OK

MB - Mercedes - Benz -6

Insert the key into the device and click OK

cgdi-prog-mb

MB - Mercedes - Benz -7

Insert the original car key into the lock

Insert key into the device and wait for collection

Insert the car key into the lock for 10s and remove it

Insert the key into EIS

After 5s, insert the key into EIS

Insert the key into CGDI MB

Save the generated data

MB - Mercedes - Benz -8

MB - Mercedes - Benz -9 MB - Mercedes - Benz -10 MB - Mercedes - Benz -11

MB - Mercedes - Benz -12 MB - Mercedes - Benz -13 MB - Mercedes - Benz -14 MB - Mercedes - Benz -15 MB - Mercedes - Benz -16
Save data

MB - Mercedes - Benz -17

Upload data

MB - Mercedes - Benz -18 MB - Mercedes - Benz -19

Query Result
MB - Mercedes - Benz -20 MB - Mercedes - Benz -21

Query end

MB - Mercedes - Benz -22

Calculate password word success. Copy the key pass

MB - Mercedes - Benz -23

Paste the key password

MB - Mercedes - Benz -24

Confirm key pass and Save EIS data

MB - Mercedes - Benz -25

MB - Mercedes - Benz -26

Save EIS data file successfully, click OK

Click Generate EE

MB - Mercedes - Benz -27

Load EIS File

MB - Mercedes - Benz -28

MB - Mercedes - Benz -29

Generate Key File

MMB - Mercedes - Benz -30

Load EIS file and confirm key password

MB - Mercedes - Benz -31

Save
MB - Mercedes - Benz -32

Read/Write key

Click OK to confirm

MB - Mercedes - Benz -33

Write BE key: select communication mode: Infrared

(NEC adapter: used for writing original  key, including smart key. Method: remove the chip to weld)
MB - Mercedes - Benz -34

Read key/chip

Open/Write (insert the key into devices before click)
MB - Mercedes - Benz -35

CGDI MB shows NEC adapter, ignore it

MB - Mercedes - Benz -36

Smart key please choose 41 format, common key and BE key please choose 51 format.

MB - Mercedes - Benz -37

select location to write key

MB - Mercedes - Benz -38

MB - Mercedes - Benz -39

Write key success

MB - Mercedes - Benz -40

MB - Mercedes - Benz -41

Password display area. Manually write down the password.

BE key read password directly, no need collect data.

How to choose a BMW FEM Key Programmer for F-series FEM System

How TO identify what F series BMW is using CAS4 and what F series BMW use FEM?

FEM: 1 / x1 / 2 / 3 / 4 series
CAS4: X3 / X4 / 5 / 6 / 7 series

What a working tool to program Smart Key to F-series with FEM module?

1)

Yanhua BMW FEM Key Programmer:

1. Update Online

2. Supports offline operation, safe and stable, easy-to-use

3. Supports latest FEM system vehicles till 2017

4. No tokens needed
Yanhua BMW-FEM Key Programmer Support BMW F-chassis Car List:

1 Series             F20/F21                            2011-2017
2 Series             F22/F23/F45/F46            2014-2017
3 Series/GT       F34/F35                            2012-2017
4 Series             F30/F31/F32/F33/F36     2014-2017
X5                       F15                                     2014-2017
X6                       F16                                     2015-2017

2)

BMW Explorer since version 14.05.08 allows users to program ignition key for FEM / BDC

Key programming into FEM / BDC is divided into several stages
1 Preparation of FEM / BDC thru OBD
2 Preparation of FEM / BDC using programmer (Reading BACKUP)
3 Programming FEM / BDC with BMW-Explorer via OBD
4 Write back BACKUP with the programmer
5 Key programming thru OBD

Paragraph 1:
It is necessary to perform a quick test , go to the FEM / BDC and click the “Key learning” button,
The program will check for a supported version of the unit, prepare the unit for the next procedure, and will display the message “Read Eeprom and upload in calc“.

Paragraph 2:
Remove the FEM / BDC unit as described HERE. Disassemble the FEM / BDC unit as described in THIS SECTION.
Read 95128/95256 Eeprom (pictured in the upper right corner) using programmer
(Orange Xprog or others that supports Eeprom 95128/95256).
Download Eeprom into BMW-Explorer, and save EEprom and write it back into the FEM / BDC.

Paragraph 3:
Install the unit on the car in the reverse order of removal, and connect BMW-Explorer via OBD.
The car probably will not respond to the key, do not get scared!
Connect to FEM, press “Reset mileage”, Explorer will propose to program the FEM / BDC, agree and wait for the programming to finish.
After successful programming, the program will write to you “Return the saved original Eeprom”, then remove FEM again and using programmer, return the previously read contents of EEprom 95128/95256. Then you can install the unit back to the car.

Sometimes it is possible that after the last manipulation the FEM / BDC will stop responding to the diagnostics, then you need to flash this EEprom into the unit and program the unit with Esys or ISTA-P and start the unit preparation from step 1.
P.S: Follow the instructions and save your time.

Paragraph 4:
Connect to the FEM / BDC control unit using the BMW-explorer, press “Extra options” then “Key learning”. Key programming window will open and will read the key data we need for programming.
If you have a working key, then you need to bring it to the emergency coil as pictured below and press the “Read crypto key” button.
About successful reading of the “Crypto” BMW-Explorer show “Crypto Ok” message.
If you do not have a working key, then you need to read the ISN from the DME and enter it into the “ISN from DME” window.
You can also enter 8 bytes of the “crypto” manually.
Now you can start to learn keys. To do this we must select a free track for the key and press “Learn key”, bring a new key to the emergency coil on the steering column.

Here is a video demo guide on 2015 BMW 328 F34 FEM key Programming by using BMW Explorer.

3):

Xhorse VVDI2 key programmer to cover FEM+bdc key programming adding on all BMW Fxx series after version  V4.3.0 authorization to be offered.

Here is the step-by-step instruction on using VVDI2 to program BMW/BDC keys.

How to use VVDI2 for BMW FEM/BDC programming

4) CGDI Prog BMW MSV80 Key Programmer

FEM/BDC key programmer function is added to CGDI Prog key programmer (Aug. 2017)! Now the device supports BMW CAS1,CAS2,CAS3 CAS4 /CAS 4+/FEM/BDC key programming/all keys lost , you can pay 175USD for the FEM/BDC authorization.

k518-bmw-fem-1

5) Lonsdor K518ISE key programmer

Lonsdor K518ISE adds BMW FEM/BDC system key programming for FREE on October 27, 2017.

k518-bmw-fem-2

Program Mercedes W221 All Keys Lost with CGDI MB and AC Adapter

CGDI Prog MB is possible to program Mercedes Benz W164 2009-/W221 2009- in 2 ways:  via OBD and on bench.

OBD mode takes about 2 hours.
Bench reading shorten the online calculation time to less than 4 minutes. (This requires CGDI MB AC adapter).

Here’s the how-to guide to program W221 all keys lost with CGDI MB on bench.

Step 1: Calculate Password
Open CGDI MB software

cgdi-mb-w221-all-key-lost-1
Go to Compute Password->Copy key without key->Collect data
Select collect data via Platform mode (quick collection)

cgdi-mb-w221-all-key-lost-2
Connect the AC Adapter with cgdi follow the wiring diagram
Insert the simulation key within 1 minute, if you have inserted, pull it out and try again

Turn the quick collect adapter switch to the Platform position
Turn ignition switch to ON position
Collection is done.Very fast.

cgdi-mb-w221-all-key-lost-3
Save file.
cgdi-mb-w221-all-key-lost-4
Save the file successfully. Upload the data to calculate password.

cgdi-mb-w221-all-key-lost-5
Upload data just saved

Press Query Result to calculate pass

cgdi-mb-w221-all-key-lost-6
CGDI MB calculates password success.
Copy the password

Step 2: Save new EIS data
Go to EIS->Read EIS data

cgdi-mb-w221-all-key-lost-7
Paste the password to corresponding area

cgdi-mb-w221-all-key-lost-8
Save EIS data

Step 3: Generate Key File

cgdi-mb-w221-all-key-lost-9

Select Generate Key File function

cgdi-mb-w221-all-key-lost-10 cgdi-mb-w221-all-key-lost-11
Select key file format and press Generate Key File
cgdi-mb-w221-all-key-lost-12
Save key file

cgdi-mb-w221-all-key-lost-13

Step 4: Write Key

Go to Read/Write Key->Read Key/Chip

cgdi-mb-w221-all-key-lost-14
Then Reset

cgdi-mb-w221-all-key-lost-15
Reset operation success

cgdi-mb-w221-all-key-lost-16
Read key again, check key information
Press Open/Write

cgdi-mb-w221-all-key-lost-17
Choose a key file (common BE key choose v51 format)
Write key success

BMW F35 N20 Adapt the ECU Donor with CGDI BMW

CGDI Prog BMW adds  “BMW data Modify” function which is used for adapt the ecu donor. Its simple to do.

cgdi-bmw-data-modify-1

Engine Model example: BMW F35 N20 engine

Procedure:

1.Read EEPROM Data in engine ECU with CGDI BMW or CG Pro 9S12 programmer

N20 engine physical wiring connection to CG Pro/CGDI BMW

cgdi-bmw-data-modify-2

cgdi-bmw-data-modify-3

Read and save enginee EEPROM data

2. Go to CGDI BMW software

Select BMW data modify function

cgdi-bmw-data-modify-4 cgdi-bmw-data-modify-5

Choose engine Type: N20 and Load Data read by CG Pro

cgdi-bmw-data-modify-6

3. Manualy enter the VIN and ISN you want and save the new data.

cgdi-bmw-data-modify-7 cgdi-bmw-data-modify-8

4. Write the new generated data to the engine with CG100 or CGPRO.

CGDI Prog MB Renew Benz W221 DSM on Bench

How to: reset/renew Mercedes Benz W221 Continental DSM using CGDI Prog MB Key Programmer on bench.

cgdi-mb-w221-renew-dsm-1

Follow cgdi prog wiring diagram to connect DSM unit with CGDI MB

ccgdi-mb-w221-renew-dsm-2 cgdi-mb-w221-renew-dsm-3

In CGDI MB software, select Auto Computer, Module type W221->ISM/DSM/ESM

Read DSM information

cgdi-mb-w221-renew-dsm-4

Press Get to calculate erase password
cgdi-mb-w221-renew-dsm-5

Erase password calculated successfully

cgdi-mb-w221-renew-dsm-6

Press Erase

cgdi-mb-w221-renew-dsm-7

Reset DSM success
cgdi-mb-w221-renew-dsm-8 cgdi-mb-w221-renew-dsm-9

Done.