Tag Archive: Mitsubishi diagnostic tool

Mitsubishi MUT-III Software Download, Install, Review, User Guide

MUT-III software download for PC:
Here are links for Mitsubishi MUT-III PRE15061-00 Multilanguage
Description:

MUT-III (Multi Use Tool) is a hardware-software complex for diagnosing Mitsubishi cars.
Contains:
VCI (Vehicle Communication Interface) – a hardware interface with which a diagnostic laptop is connected to a car, as well as some other diagnostic procedures;
set of diagnostic cables for connecting to vehicle diagnostic points (OBD-II connector, battery terminals, etc.);
Microsoft Windows laptop with proprietary software.
The MUT-III complex allows for the complete diagnostics of ALL electronic components of a Mitsubishi car, measurement of engine and transmission parameters, tuning and adaptation of electronic components of the car, updating the firmware (firmware) of the car blocks, etc.
You need to know that to change the settings of the “hidden functions” of the car (Lancer X, ASX, Outlander XL, Outlander III, Eclipse Cross, L200 V, Pajero Sport III …) in its pure form MUT-III is not suitable.
With its help, you can only unload from the car and load back the configuration files (kon-file). You can edit these settings with third-party software .
mitsubishi-MUT-III-software-download-01

mitsubishi-MUT-III-software-download-02

mitsubishi-MUT-III-software-download-03

MUT 3 VCI (Vehicle Communication Interface):
mitsubishi-MUT-III-software-download-04

mitsubishi-MUT-III-software-download-05

mitsubishi-MUT-III-software-download-06
source
Mitsubishi MUT 3 install
So mine just showed up, but the software craps out mid-install. It left a MUT-III link on m desktop, but then it bitches about not having IE5. I’m running Windows 7, and I set the installer to run in XP compatibility mode. :-/
Tried an XP machine, got this error:
FAILED TO SETUP MSDE COMPONENTS ON MUT 3 CAESARCOMPDB2
I have installed no problem on W7 and XP
for W7 – run as admin, and also run internet explorer in full time compatibility mode.
for XP – it just worked.
4 . you can run MUT3 SW on windows7
it runs on Internet Explorer (yes, i know!)
before you run MUT3 – quit any IE windows you have open
– put your IE into Compatibility Mode.
5. In W7 it will error when you load up MUT3. it does for me anyways. just kill the error popup and off you go
6. when you first connect the VCI – wait a while – it will need to update the VCI firmware in some cases. just let the MUT3 S/W do it’s thing. look on the VCI screen for details of what it’s doing before you go any further
Conclusion:
Mut3 needs some patience… it was made at the time of web 0.1 or just before.…
It runs only on XP and only with a really old release of IE.
It is difficult (not user friendly) to choose the car’s model.
It is very difficult to navigate from menu to item…
Good luck….

Mut 3 Mut III MUT-3 Mitsubishi Diagnostic Scanner FAQS

Want to know more about MUT 3 diagnostic tool ? Lets check some FAQs as bellow :

What is MUT-3 ?
MUT stands for Multi-Use-Tester.
The MUT-3 can perform a variety of functions including rewriting the vehicles ECU, rewriting the vehicles TCM, reading diagnosis codes, and clearing diagnosis codes.

What is the difference between the USD$415 and USD$748 Chinese mut 3 and What is the function of the cf car includes in some mut3
There have no generic answer as that totally depends on vendors, etc. Pick two actual auctions or items for sale and compare those two.

There are usually two flavors available – one that reads codes and stuff and the other that is capable of doing programming. The programming units are usually a higher price.

How to install Mitsubishi MUT 3 Software on Windows 7 ?
Please check here : How to install software

Chinese MUT 3, can it do teach in and reprogramming?
Yes, it works.

I heard I can download a MUT III online. Is that true? Where?
There are various sources to obtain the MUT-III SOFTWARE online. However doing so through a torrent or FTP site is software considered piracy and illegal.

Do I need to install the file somewhere in my hard drive?
Yes, you will need to manually copy the FILE. it does not appear in the DB anywhere.
You select the TCU portion, then Options, then program TCU and manually search for the file. Then tell it Yes to continue with the programming.

My vin’s not recognized either! Where do you find the b001?
The DB in your installation is not for the proper region. Not to worry. It should show the current VIN and you can use that same one when doing VIN programming.

Note the “CFF_SST” subdirectory in the CDE12031 subdir (or off the root of the new CD you burned). All the different SST TCU ROM files are in there. Three for EVO (A749, B001, B151), some for Ralliart, some for other models with an SST.

You will need to manually copy those files to the computer then specifically tell the MUT3 program where to locate them. It’s not intuitive on how to do this, but it’s not particularly difficult either.

It’s just like falling off a bicycle – Learn it once and know it for life.

No communication with V.C.I. i have the newest mitsubishi software: PRE14031_00 ….

Is the VCI (large black box with both cables connected to it) powered on (there’s a small rocker switch on the side). A green light will come on.

Do you using the blue db25-OBD2 cable?
Was the VCI recognized by the OS when the USb cable was connected to the computer? It should install a driver for it. Look in Computer Management. Devices to see if it’s seen by the OS (with it connected, powered on). Try different USB cable.
Lastly the ignition switch must be in Run position, engine does not need to be running.
It’s always a good idea to have a battery charger connected when doing programming. Just in case the battery isn’t strong enough.

Outside of a defective unit or cable, that’s about it. The CF card plays no part as far as connecting to the car.

Is it true I can unlock Super Sport Mode and Launch Control with a MUT-III?
Yes.

I don’t know of anyone who got the ecu update thing to work
but you don’t need it , it all works fine without it

I have been successful in getting EVERY update to install. But I agree there’s not much useful in there for me so far.

( I hate how html’ing screws up tabs and directory listings!! )
Original DVD directories:
08/06/2013 03:05 PM <DIR> CD3E12031
08/06/2013 03:05 PM <DIR> PRE12031

cd PRE12031 (Path = \PRE12031):
Dir:
08/06/2013 03:06 PM <DIR> .
08/06/2013 03:06 PM <DIR> ..
07/13/2012 12:40 AM 53 autorun.inf
08/06/2013 03:05 PM <DIR> BAT
08/06/2013 03:06 PM <DIR> INSTALL
07/13/2012 12:40 AM 139,264 Mut3Check.exe
07/13/2012 12:40 AM 633 Mut3Check.exe.manifest
07/13/2012 03:01 AM 4,511 MUT3Check.ini
08/06/2013 03:06 PM <DIR> N
08/06/2013 03:06 PM <DIR> UNINSTALLER

So one would execute \PRE12031\Mut3Check.exe to install the MUT3 *program*.

Back on DVD:
cd ..\CD3E12031 (Path = \CD3E12031)
dir

07/13/2012 12:40 AM 61 autorun.inf
08/06/2013 03:05 PM <DIR> CFF_SST
07/13/2012 12:40 AM 225,280 ECUUpdateJudg.exe
08/06/2013 03:05 PM <DIR> ENV
08/06/2013 03:05 PM <DIR> MUT3

Burn the above files and directories to a new CD so these are in the ROOT of the CD (NOT in a subdirectory)

Dir on the new CD will show this:
07/13/2012 12:40 AM 61 autorun.inf
08/06/2013 03:05 PM <DIR> CFF_SST
07/13/2012 12:40 AM 225,280 ECUUpdateJudg.exe
08/06/2013 03:05 PM <DIR> ENV
08/06/2013 03:05 PM <DIR> MUT3

Then run the ECUUpdateJudg.exe program. All this does is populate the database with stuff that you probably won’t need. There can be useful ETACS/ABS/AYC/etc. updates but we have no way – just now – of knowing which ones we may want or what they do, or how to get back to what we just over-flashed.