Tag Archive: saab tech 2

How to upload captured data by GM TECH2 TIS2000

Topic:  How to upload captured data by using GM Tech 2 Scan Tool.

How-to-upload-captured-data-by-GM-TECH2-TIS2000-1

I hope TIS2000 can give more useful info regarding troubleshooting on C5 than a coloring book .
The Tech2 can record snapshots ( two I think) of a number of parameters. These snapshot recordings can be started by a DTC or manual started pressing the Tech 2 keypad .
These snapshots can later be uploaded from Tech 2 to the PC with TIS2000 and replayed as shown on the sceendump below.

How-to-upload-captured-data-by-GM-TECH2-TIS2000-2

It’s a neat feature for someone who doesn’t have another way to do a datalog.
Sure was worth the money I spent.

How to Bleed ABS on Corvette with GM Tech II

Bleeding ABS on Corvette with GM Tech II by following the next procedure.

Perform a manual or pressure bleeding procedure. If the desired brake pedal height results are not achieved, perform the automated bleed procedure below.
The procedure cycles the system valves and runs the pump in order to purge the air from the secondary circuits normally closed off during normal base brake operation and bleeding. The automated bleed procedure is recommended when air ingestion is suspected in the secondary circuits, or when the BPMV has been replaced.

Automated Bleed Procedure
Notice: The Auto Bleed Procedure may be terminated at any time during the process by pressing the EXIT button. No further Scan Tool prompts pertaining to the Auto Bleed procedure will be given. After exiting the bleed procedure, relieve bleed pressure and disconnect bleed equipment per manufacturer’s instructions. Failure to properly relieve pressure may result in spilled brake fluid causing damage to components and painted surfaces.
1. Raise the vehicle on a suitable support.
2. Remove all four tire and wheel assemblies.
3. Inspect the brake system for leaks and visual damage. Refer to Brake Fluid Loss or Symptoms – Hydraulic Brakes. Repair or replace as needed.
4. Inspect the battery state of charge.
5. Install a scan tool.
6. Turn ON the ignition, with the engine OFF.
7. With the scan tool, establish communications with the Professional Diagnostic Tool. Select Special Functions. Select Automated Bleed from the Special Functions menu.
8. Bleed the base brake system.
9. Follow the scan tool directions until the desired brake pedal height is achieved.
10. If the bleed procedure is aborted, a malfunction exists. Perform the following steps before resuming the bleed

procedure:
– If a DTC is detected, refer to Diagnostic Trouble Code
(DTC) List and diagnose the appropriate DTC.
– If the brake pedal feels spongy, perform the conventional brake bleed procedure again.
11. When the desired pedal height is achieved, press the brake pedal in order to inspect for firmness.
12. Remove the scan tool.
13. Install the tire and wheel assemblies.
14. Inspect the brake fluid level.
15. Road test the vehicle while inspecting that the pedal remains high and firm.
Read a hot topic:

Free download GM TECH 2 PATHING DOCUMENT

Here is the GM Tech 2 PATHING DOCUMENT that every TECH 2 Owner should have. You work BACKWARDS from what you want to see.

GM-TECH-2-Scanner

See the attach PDF Document:

Look at MISFIRE in the chart and on the Tech2 Go to Special Functions, Powertrain and then misfire graphic

Misfire Graphic – Engine > Engine Controls > Special Functions > Powertrain Control Module
Misfire Graphic – Powertrain > Special Functions
Misfire Graphic – Powertrain > Special Functions > Special Functions (PCM)

https://mega.nz/#!JEwwXCLR!5EGrMvZegLzKzjB8pdJ_3ahPwNi2sdejVtmjAcob3eE

[Promotion] July Special Offer with 3 Items! GM Tech2, Launch X431 Pro Mini, Iprog+ Key Programmer

For July, we prepared a special Offer for following tools, if you need them, please don’t miss this discount:

1. GM Tech 2 Tech 2 Diagnostic Scanner Tool Full Package with GM TIS2000 Software

259USD DHL fast shipping
Original Price: 285USD

2. Original Launch X431 Pro Mini WiFi/Bluetooth Full System Diagnostic Tool

659USD DHL Free shipping
Original Price:679USD

3. Iprog+ Iprog Pro Programmer Support IMMO + Mileage Correction + Airbag Reset till year 2019

239USD DHL Free shipping
Original Price:289USD

GM Tech2Win Software Free Download

What is GM Tech2Win?

GM Tech2Win is an application version of the Tech 2 and CANdi (Control Area Network diagnostic interface) moduleTech2Win can be used during a vehicle road test, offering a larger screen with all of the Tech 2 Scan Tool functionality. The Tech2Win application offers all of the features and functions of the Tech 2 for Opel, Saab etc.

GM - Tech2Win - Software - Free - Download GM - Tech2Win - Software - Free - Download

Tech2Win Software Features:

1.Tech2Win is designed to be used for diagnostic function(No programming function)

2.Service programming function can only through the TIS2Web service programming system (SPS)

3.Cover the same vehicle models as Tech2

4.Detect the computing power of PC as well as the speed of the GM MDI diagnostic interface

5.Provide faster operation that a Tech2 scan tool with CANdi module

GM Tech2Win Software Functions:

The software’s diagnostic features and reporting capabilities include reading and clearing diagnostic trouble codes, viewing data parameters, operating output controls, and executing system tests.

Tech2Win Support Languages:

Bulgarian, Czech, Danish, German, English (either British or American), Greek, Spanish, Finnish, French, Croatian, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese (Brazil), Portuguese (Portugal), Romanian, Russian, Slovenian, Swedish, Thai, Turkish, Chinese (Simplified), Chinese (Traditional)

GM Tech2Win Download:

Original GM Tech2Win Download,you need to subscribe on Official ACDelco website,and download it by TIS2web(cost extra money)

Original GM Tech2Win Subscription Price:

Tech2Win Subscription Option

3 Days $55

1 Month $225

1 Year $775

GM Tech2Win System Installation Requirements:

Processor:Intel Core i3, i5, i7 4thGen

System Memory(RAM):4GB

Hard Disk Drive:256GB

USB Ports:4

Display:17” 1366*768

Network Adapter:Wired–Gibabit,Wireless–802.11n

Operating System:Window 7/8/10

Cracked GM Tech2win software for GM MDI software activation
when you install tech2win software, and try to update or run tech2win software, your license has expired on GM MDI tech2win software, show: “e667481 your license has expired or does not exist, following error picture:

Solution 1: if tech2win’license has expired, you need renew it, If you have TIS2web you should have a security icon you can click on.. Make sure tech2win is running in the background, just click ok at the E667481 error, you don’t even need the MDI plugged in for this either.. Once you follow the prompts thru the security process you’ll have another 30 days.

Solution 2: If you don’t have TIS2Web, you also can modify the system time, attempt to get the new license.

Solution 3: you can crack the tech2win software, or install cracked version tech2win software, the tech2win software remove license limitation, and which does not check the bin against a whitelist. It will try and run any GM tech2 bins file, We offer third soution, and sell cracked tech2win software. you can free add any tech2 bins file to tech2win software