Tag Archive: X300 DP Full Configuration

USA 2018 Jeep Compass Program a Smart Key with Obdstar X300DP PLUS

This is a test report from CnAutotool.com.

You will get the solution of: What for 2018 Jeep Compass USA key programming? How to?

Two keys to Compass:
obdstar-2018-jeep-compass-proximity-1
Jeep USA-CANADA in OBDSTAR X300 DP PLUS:
obdstar-2018-jeep-compass-proximity-2
obdstar-2018-jeep-compass-proximity-3
It’s 2018 Jeep Compass USA
Immobilizer -Compass (2017-2018)- proximity
obdstar-2018-jeep-compass-proximity-4

obdstar-2018-jeep-compass-proximity-5

VERY IMPORTANT: pls confirm your internet connection is good, coz server connection is required for the functions below

obdstar-2018-jeep-compass-proximity-6
Test 1: Read pin code
Test 2: Read key quantity
Test 3: Erase a key
Test 4: Program a new key

in detail…

Test 1: Read pin code
obdstar-2018-jeep-compass-proximity-7
X300DP PLUS is gonna to read Pin codes
Confirmed that your network connection is good
Switch ignition off and press the emergency flasher switch
obdstar-2018-jeep-compass-proximity-8
Read Pin code success
obdstar-2018-jeep-compass-proximity-9
Test 2: Read key number
Obdstar key master dp will read keys
2 keys available
Test 3: Erase a key
Obdstar key master dp will erase a key
obdstar-2018-jeep-compass-proximity-12
Make sure that your network connection is good
Switch ignition off and press the emergency flasher switch
Make sure there are no wireless devices close to the prox key
Make sure all doors are closed
obdstar-2018-jeep-compass-proximity-13
The procedure will disable all prox and then program one prox
obdstar-2018-jeep-compass-proximity-14
Obdstar fill in pin automatically
Just press enter to continue
obdstar-2018-jeep-compass-proximity-15
obdstar-2018-jeep-compass-proximity-16
Put the smart key to be added in the central control position
press and release the unlock key once within 30 seconds (3 times)
obdstar-2018-jeep-compass-proximity-17

Now, only 1 key available

obdstar-2018-jeep-compass-proximity-18
Finish

Test 4: Program a new key

Obdstar X300 DP PLUS will program a smart key

obdstar-2018-jeep-compass-proximity-19

Make sure:

– your network connection is good

– Switch ignition off and press the emergency flasher switch

– Make sure there are no wireless devices close to the prox key

– Make sure all doors are closed

obdstar-2018-jeep-compass-proximity-20

The procedure will add a new key without erasing the ones previously programmed

Auto fill in pin

obdstar-2018-jeep-compass-proximity-21

Pls add to the smart key in the central position

30 seconds

press the unlock button repeatedly until the door lock moves

obdstar-2018-jeep-compass-proximity-22

2 keys now!

Finished!

obdstar-2018-jeep-compass-proximity-23

Test the new key

Worked!

OBDSTAR X300 DP Plus adds Buick Cadillac GMC Chevrolet IMMO

OBDSTAR X300 DP PLUS adds Buick Cadillac GMC Chevrolet OBD pin code reading and key programming models.

No 20-digit authorization code required on all these models.

The upgrade can be applied to all OBDSTAR X300 DP PLUS version, Configuration A, B and C.

Chevrolet

Cruze 2017-
Malibu 2017-
Malibu XL 2017-
Camaro 2016-
Silverado 2017-
Sububran 2017-
Tahoe 2017-

x300-dp-plus-update-1

Buick

Lacrosse 2017-
Regal 2017-
Envision 2017-
Encore 2017-
GL8 (2.5L) 2017-

x300-dp-plus-update-2

Cadillac

ATS 2017-
ATSL 2017-
XTS 2017-
XT5 2017-
CT6 2017-
Escalade 2017-

x300-dp-plus-update-2

GMC

Sierra 2017-
Yukon 2017-

x300-dp-plus-update-4

2012 Land Rover Discovery 4 All Keys Lost Programming by Obdstar X300 DP PLUS

OBDSTAR X300DP PLUS test report:

Have programmed two new keys to 2012 Land Rover Discovery 4, when all keys are lost.

Key master:
Obdstar x300 dp plus

Car model:
2012 Land Rover Discovery 4

Two remotes for key programming:
obdstar-key-master-landrover-discovery-all-keys-lost-1

obdstar-key-master-landrover-discovery-all-keys-lost-2

obdstar-key-master-landrover-discovery-all-keys-lost-3
Steps:
Step 1: select the car model
Step 2: erase all keys
Step 3: program new keys
Step 4: confirm functionality of new keys

in detail…

Step 1: select the car model

In obdstar x300 dp plus key master:

Diag program – Land Rover – v31.01 sw – Discovery 4 – smart key system – before 2013

obdstar-key-master-landrover-discovery-all-keys-lost-4
obdstar-key-master-landrover-discovery-all-keys-lost-5
obdstar-key-master-landrover-discovery-all-keys-lost-6
obdstar-key-master-landrover-discovery-all-keys-lost-7
obdstar-key-master-landrover-discovery-all-keys-lost-8

obdstar-key-master-landrover-discovery-all-keys-lost-9

Step 2: erase all keys

add smart keys lost – all keys will be erased – at least two smart keys need to be registered to start the key

obdstar-key-master-landrover-discovery-all-keys-lost-10

obdstar-key-master-landrover-discovery-all-keys-lost-11

obdstar-key-master-landrover-discovery-all-keys-lost-12
press the start button – switch ignition off

obdstar-key-master-landrover-discovery-all-keys-lost-13

obdstar-key-master-landrover-discovery-all-keys-lost-14
obdstar-key-master-landrover-discovery-all-keys-lost-15

obdstar-key-master-landrover-discovery-all-keys-lost-16

current key number: 0

obdstar-key-master-landrover-discovery-all-keys-lost-17

Step 3: program new keys

obdstar-key-master-landrover-discovery-all-keys-lost-18

obdstar-key-master-landrover-discovery-all-keys-lost-19

obdstar-key-master-landrover-discovery-all-keys-lost-20

obdstar-key-master-landrover-discovery-all-keys-lost-21

obdstar-key-master-landrover-discovery-all-keys-lost-22

obdstar-key-master-landrover-discovery-all-keys-lost-23

obdstar-key-master-landrover-discovery-all-keys-lost-24

obdstar-key-master-landrover-discovery-all-keys-lost-25

obdstar-key-master-landrover-discovery-all-keys-lost-26

obdstar-key-master-landrover-discovery-all-keys-lost-27

obdstar-key-master-landrover-discovery-all-keys-lost-28

obdstar-key-master-landrover-discovery-all-keys-lost-29

obdstar-key-master-landrover-discovery-all-keys-lost-30

obdstar-key-master-landrover-discovery-all-keys-lost-31

programming completed!

Step 4: confirm functionality of new keys

obdstar-key-master-landrover-discovery-all-keys-lost-32

obdstar-key-master-landrover-discovery-all-keys-lost-33

Both two keys work good!

Success!

Have fun with obdstar key master sp!

Program Ford Edge 2014 Smart Key with OBDSTAR X300 DP Plus

OBDSTAR X300 DP PLUS will program keys on old (pre-2014) and new (2017 up) Ford Edge. Both add key and all keys lost.  Here we have successfully added a new smart key to a Edge year 2103 via OBD.

Procedure:

Turn on ignition switch

Put original smart key into the cup holder

Select Immobilizer-Ford->Smart key system->Edge->Asia->pre-2014

ford-2013-smart-key-obdstar-1 ford-2013-smart-key-obdstar-2
ford-2013-smart-key-obdstar-3
ford-2013-smart-key-obdstar-4
ford-2013-smart-key-obdstar-5

ford-2013-smart-key-obdstar-6

Put new smart key into the cup holder

Built communication

Select Program Smart Keys

ford-2013-smart-key-obdstar-7

Configuring system

ford-2013-smart-key-obdstar-8
Program key success. Continue to add another key or quit

ford-2013-smart-key-obdstar-9

Test the new smart key. It works.

ford-2013-smart-key-obdstar-10

www.cnautotool.com

2004 Mazda rx-8 USA AKL program key: ikey820/x300DP/CK200 /SKP900

2004 Mazda rx-8 USA AKL program key
ikey820 FAIL to communicate all the time under everything under 2004 year only one type

X300 DP PLUS FAIL same shit 2004 one type and nothing else communicated

Mazda 6 2012 USA AKL erase and program 2 key no problem 30 seconds SUCCESS

CK200 successful communication and pulled proper information to do job ~~~~ ME THIS THING IS STILL KICKING ASS

ikey820 - x300DP - CK200 - SKP900

for 2004 year it had a type 1 and a type 2 i believe type 2 was the one that worked
vin: jm1fe17n7401xxxxx
serial# 01ef
part number# n3z1-18881-v
outcode:8b9a32
error ctrl:3fe92
outcode:832e

in the end though i didnt use the ck200 as i wanted to know if the skp900 had the ability to do it as well. the ikey820 is supposedly built off of it so it should fail too right?

SKP900 match auto pincode mazda 8 add key done in 30 seconds SUCCESS

so if the ikey820 is built off of the skp900 then why did it just fail?????

so winners are SKP900 and ck200

OBDSTAR X300 DP X-300DP PAD Functions Updated

OBDSTAR X300 DP is the first tablet of OBDSTAR, which has reached a higher level inkey programming and diagnosis.

Full Configuration: Immobilizer+ odometer Adjustment+ EEPROM/PIC Adapter+ OBDII+ ABS+ TPS+ SRS Reset+ TPMS(Low Tire) Reset+ Steering Angle Reset+ CVT Learning/Value Reset+ EPB+ Oil/service Reset+ Battery Matching+ Full systems Diagnosis (Japanese and Korean Serials,more car models for diagnosis will be added in the future)

OBDSTAR X300 DP Update Announcement on July 31st

1. Odometer Reset:

Solve NEC 95320 MM dash board type odometer reset function defects

Solve NEC 24C64_VDO dash board type odometer reset function defects

Solve Sagitar (2007-2010) CDC24C32 dash board type odometer reset function defects

Solve NEC24C32 dash board type odometer reset defects

Solve W251, W164 odometer reset defects

Solve the following models odometer reset function

Crown Victoria (2005 -), E250 (2008-2009), E350 (2008-2009), E450 (2008-2009), Escape (2008-2012),

Explorer (2004), F150 (2006-2007) F250 (2006-2007), F350 (2006-2007), F450 (2006-2007),

F500 (2006-2007), F550 (2006-2008), Five Hundred (500)) Flex (2008-2012), Focus (2005-2008),

Freestar (2006 -), Freestyle (2005-), Merc Mariner (2008 -), Town car (2005-),Taurus (2008-2009, 2004)

2. IMMO Remote Control Programming:

Issued VW Touareg IMMO

Issued Audi A6/A7/A8 IMMO optimization

Issued Audi Q5/A4L generation 5

Optimize Ford Ranger, transit (Transit) IMMO programming (BUG:1337, BUG:1338)

Adding the IMMO system ISO type

3. Diagnostic Models:

Adding Renault new models:

ALASKAN\AVANTIME\CAPTUR/KAPTUR BR/IN/RU\CAPTUR/QM3/KABIN\CLIO II PH6\CLIO II\CLIO III\CLIO IV\CLIO V6 PH2\CLIO V6

CLIOIIP2/3/4\DOKKER/KANGOO\DUSTER PH2\DUSTER\ESPACE IV\ESPACE V\ESPACE\ESPACEIV PH2/3/4\KADJAR CN\KADJAR\KANGOO II,ect.

Adding Daxia new models:

1304_PK_1_POINT_9D\1304_DS_1_POINT_9D\1305_PK_1_POINT_9D\1305_DS_1_POINT_9D\D_POINT__CAB1_POINT_9D\SUPERNOVA

SOLENZA\LOGAN\SANDERO\DUSTER\LODGY\DOKKER,ect.

Adding Renault – Samsung new models:

CAPTUR_QM3_KABIN\CLIO_IV\KOLEOS_II_CN_QM6_CN\KOLEOS_II_QM6\KOLEOS_QM5\LATITUDE_SM5\MEGANE_IV_SEDAN\NEW_SM3_FLUENCE_MEGANE

SAFRANE2_Point_0_SM5_DF\SAFRANE_2_Point_3_SM7_LF\SCALA_SM3_CF,ect.

Adding Mercedes-Benz new models:

CLK-series\E/CLS-series\CLS-series\S/CL/Maybach- series\CL- series\SL/SLR/SLK- series\SLR- series\SLK- series\M/G/GL/GLK- Series\M-series\G-series

GL-series\R-series,ect.

Adding Maybach new models:

240.078 MAYBACH 57\240.079 MAYBACH 57S\240.077 MAYBACH 57 S\240.178 MAYBACH 62\240.179 MAYBACH 62S/R\240.177 MAYBACH 62 S,etc.

4. optimization

Optimize VW reset airbag

Optimize VW throttle

Optimize B30 VIN all 00 flashback (1334)

Optimize VW oilrvice reset

Optimize VW steering angle reset

Optimize VW EPB

Optimize VW battery matching

Optimization software (to solve the problem of DP device can not be tested)

First Issue FR language

Solve the error and content returns problem when diagnostic device enters the connection detection

Solve the multiple content coverage APP crash problem

Solve the APP crash problem during software update in Thai language

Solve the VCI.BIN failed to load when double click the diagnostic models list

Remove the password operation to clear fault code

PASU version adds ALTO 800 ID46 (Blank) IMMO system

Optimize Buick Royaum key programming

Optimize Chevrolet Koros

Optimize the Bluetooth communication of Audi Q7, A6L generation 4 (EEPROM backup)

Optimize NEC 24C64 read IMMO data algorithm

Optimize Transit IMMO system (BUG: 1302)

Solve the system entry failure of Corolla – 06 / 2004-> / Avensis – <- 04/2005 / LEXUS – Gs430

Optimized 510 smart key programming function security verification

Key Programming

Adding 310 Wagon smart key system function support

Added DX3 smart key programming function

Addingd Roewe ERX5, I6 smart key programming

Added Roewe 360 smart key programming

Added KWIND model key programming function

5. Injector Code

Adding injector code function new models

Audi

Automatic scanning

Manual selection
A1
A2
A3
A4
A5
A6
A7
A8
CABRIO
Q3
Q5
Q7
R8
RS3
RS5
S2
S3
S5
TT
TTRS
TTS
Chrysler
Automatic scanning
Manual selection
Cherokee (free light)
2014
2015
Ram 3500 Pickup
2011
2012
Ram 4500/5500
2011
2012
Town & Country
2011
300/Magnum/Charger
2006
2007
2008
2009
2010
Challenger
2008
2009
2010
Commander
2006
2007
2008
2009
2010
Grand Cherokee
2005
2006
2007
2008
2009
2010
Wrangler (Export)
2008
2009
2010

The obdstar company recently has released a OBDSTAR X300 DP key programmer.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-0.jpg

Here, engineers at CnAutotool.com wanna guide you how to use OBDSTAR X300 DP to erase a working key and program a new key.

About X300 DP obdstar:
There are two versions of this obdstar key programmer in the market:

Full package: Immobilizer + mileage adjustment + EEPROM/PIC adapter + OBDII + ABS + TPS + SRS reset + TPMS (low tire) reset+ Steering angle reset + CVT learning/Value reset + EPB + Oil service reset + Battery matching + Diagnosis(Japanese and Korean serials)

Standard package: Immobilizer + mileage adjustment + EEPROM/PIC adapter + OBDII

obdstar X300 DP pad clear a working key:

This is the working key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-1.jpg

Go to Diagnosis & Programming

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-2.jpg

Select the model:
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-3.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-4.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-5.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-6.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-7.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-8.jpg

Go to Immobilizer system for the GS model’s non-smart key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-9.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-10.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-11.jpg

Reading vin

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-12.jpg

Clear a key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-13.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-14.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-15.jpg

OBDSTAR X300 DP obdstar key programmer add a new key:

Go to program a key

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-16.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-17.jpg

Enter pass

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-18.jpg
Program a key successfully

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-19.jpg

Test the new key on the car and verify it’s working.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/24-20.jpg

Done!

Program Audi A6L 4th IMMO Remote Key by OBDSTAR X300 DP

To Program Audi A6L 4th immobilizer remote key by OBDSTAR X300 DP X-300DP PAD Tablet Key Programmer, you need extra OBDSTAR RFID Adapter (for VW AUDI SKODA SEAT 4th & 5th IMMO) to work with.

Step-by-step Guide:
1. Turn on ignition with dealer key and read out eeprom data thru 9S12DT256 for Audi A6L.

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-1.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-2.jpg

Select IMMO key programmer->VAG-> Audi

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-3.jpg

Select 4th generation immobilizer system

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-4.jpg

Select 9S12DT(G)128

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-5.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-7.jpg

Read EEPROM data (backup)

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-8.jpg

Turn ignition to ON position

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-9.jpg

Reading eeprom data
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-10.jpg

Save eeprom data

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-11.jpg

2. Generate CS code and PIN code from EEPROM data thru 9S12DT256.

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-13.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-14.jpg

3.Generate Dealer Key from the EEPROM data(Bin file) and do Key Data Learning with OBDSTAR RFID Adapter Chip Reader.

Connect RFID adpater with X300DP tablet

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-15.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-16.jpg

Insert the new key into OBDSTAR RFID Adapter

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-17.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-18.jpg

Make sure you have backup the eeprom data

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-20.jpg

Enter key numbers to be programmed (1-8)

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-22.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-23.jpg

Turn ignition to ON

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-24.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/19-25.jpg

Insert the key to be learned one by one and follow OBDSTAR X300 DP prompt

After key learning done, test the new key to turn on the ignition.

http://forobd2tool.com/wp-content/uploads/2017/06/14/19-26.jpg

Done!