Tag Archive: Odometer adjustment Tool

Lonsdor K518ISE Key Programmer Maintenance


This Post is about OBD2 Scanner Lonsdor K518ISE  Key Programmer Maintenance, please read it carefully, they can help your K518 key programmer in good working efficient and has long service life.

K518ISE Main Unit Maintenance:

1. Place the equipment and accessories in a place where children are not accessible.
2.Keep the equipment in dry and good ventilated environment. Do not use chemicals,
detergents or water to clean the equipment, and avoid rain, moisture or liquid contained
minerals to corrosion electronic circuit boards.
3.Do not store the equipment in over hot/cold place as it will shorten the lifespan of
electronic devices and damage the battery, the temperature range required: low
temperature (-10 ± 3) ℃, high temperature (55 ± 3) ℃.
4.Please do not disassemble the equipment personally, shall you have any problem,please contact
after-sales service or the certified dealer.
5.Do not throw, knock or strongly vibrate the device, it will damage the internal circuit board.
6.If the equipment is in water, make sure it is disconnected and should not be
disassembled personally. Do not use any heating equipment (dryer, microwave oven,
etc.) to dry. Please send the device to local dealer for inspection.
7.After a long time use, such as during working state, long charge, connect OBD to
diagnose, the device may become a slight fever, this is a normal, please do not worry.
8.The device has a built-in antenna, please do not damage or modify the antenna
without authorization, to avoid performance degradation of the device and the SAR value
exceeds the recommended range. As the antenna position will affect antenna performance,
resulting in equipment transmission power in an unstable state, so please try to avoid
holding the antenna area (upper right corner).
9. Do not place heavy objects on the device or squeeze vigorously, to avoid device
damage or display screen distortion.

Auto Key Programmer K518ISE Battery Maintenance:

1.When the device is in start state, please do not remove or maintain the battery. The
inside polymer lithium battery, if not handled properly, may run the risk of fire or burning
2.Please do not disassemble the battery, do external short-circuit contact, or expose the
battery at excessively high or low temperature (-10°C~55°C as suggested), and do not
dispose battery in fire or as normal waste.
3.Please be careful to keep the battery dry and away from water or other liquids, to avoid
short circuit. If soaked, please do not start the device or remove the battery without

Lonsdor K518 SKE-LT Emulator Key Binding Guide

Insert battery 2032 to emulator keys. All 4 emulator keys should be Binded with K518ISE.

Turn on K518

Select Toyota-> All smart keys lost-> Bind emulation key

14-1 14-2 14-3

This function can bind SKE-LT series emulator keys to lonsdor k518ise host.

Such operation is required when using the SKE-LT series emulator keys.


Place the emulator key into car programmer K518 key slot


Press the button on the emulator, green indicator tuns on


emulator keys with car key programming Lonsdor K518ise success,and you can program all keys lost with the emulator key.

TIPS:If a key fails to bind, switch the key more than three times to re-bind, click the button to open, press the button a few seconds off

Lonsdor K518ise Support BMW Functions

Lonsdor K518ISE Key Programmer support different BMW key immobilizer system with different functions.  It support BMW CAS2,CAS3,CAS4,CAS4+,FEM/BDC.

Lonsdor K518ise for BMW CAS2/CAS3 Series:

Key Programming, Disable and Enable key, Synch ELV, Synch Dem, CAS3 updating, Backup&Recover Eeprom data,Clean fault code, Clean shadow,Force to recover CAS, Make key with EEPROM data.

Lonsdor K518ise for BMW CAS4/CAS4+:

Make ignition key,Disable/Enable key.

Lonsdor K518ise on CnAutotool for BMW FEM/BDC:

Read Key info,Preprocess FEM/BDC system, make dealer key, Enable/Disable key, Delete key.


Lonsdor K518ise Mileage Programmer Car List

Lonsdor K518ISE Key Programmer is able to perform odometer adjustment on some car models including VW,Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia etc.

19-1 19-2

Lonsdor K518ISE odometer adjustment car list

Here we go one by one.

1.Tab “VW”, get option: IMMO4, Phaeton, IMMO2 & IMMO3.


Tab “IMMO 4”, have options: NEC 24C32, NEC 95320, 2013 NEC 24C64, NEC 24C64, 2013 NEC+24C64 color screen, 9S12XHZ512, CDC + 24C32 and 2012 NEC+24C64 color screen.


2.Tab “Prosche”, you get options : Cayenne  2010-   panamera  2010-     918  2015
3.Tab “Ford” and you get options: Max (2010 -), S-Max (08-10), New Mondeo, Ecosport, Kuga (Color monochrome), Mondeo (11-, 08-, 08-10), Fiesta (13-, 08-12), Focus (04-08, 12-, 09-11), Explorer (11-15), Mondeo Chia-X (11-13).


4.Tab “Jaguar ” and you get options: Xj  f-type    xe2015-
5.Land rover coverage: Evoque 11-  range rover 10-  discovery 4  freelander2
6.Tab “Mazda” and get options: Axela, M6(Atenza), CX-5, CX-9, M2, M3, M5, M6, New M6.


7.Audi coverage: a6L -2009
8.Renault coverage: type1
9.Hummer coverage:  h2 2007-
10.HYUNDAI coverage: Accent (06- ), Getz (24c16), I20 (24c16), IX25 (24C16), Verna (RBC) 24c16, Veloster ((24C16), Azera (D70F3423), HB20 (D70F3423), Mistra (D70F3536), Sonata9 (D70F3536), New Tucsom (2016), Elantra (AD) D70F3536.


11.car key programming Kia coverage: K5 (24c16, D70F3423, D70F3536), Ceed (24c16,D70F3423), Magentis (Optima) 24C16, Rio (24C16 2015 ), Sorento (2007-), Soul (24C16), Sportage (2008-), Sportage (Sportage R) 24C16, D70F3423, D70F3536, K4 D70F3536, KX5 D70F3536.

More to be upgraded…