What is Vocom II 88894000?
88894000 Vocom Interface is a diagnostics application that covers the whole repair process through the use of plug-ins. With 88894000 Vocom Interface you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine. 88894000 Vocom Interface also provide functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.
Vocom II 88894000 firmware installation instruction:
1.Locate the saved file and extract the file contents.
3.On your PC, go to Start, All Programs.
Click on VOCOM II folder and then click to launch the VOCOM II Configuration Application.
4.Plug the VOCOM II into the PC USB port. The VOCOM2 will display under “All devices”
Please note: Serial Number (SN) differs. Do not connect to the vehicle at this time.
When you receive the “Please update device firmware” pop up message.
Click to continue. Otherwise, click on the “Device software” tab.
5.Click on “Update device”.
6. The software will begin to update.
Note: Updating device can take a few minutes.
When the Update is complete, the VOCOM Configurator will refresh the settings.
7.Open Tech Tool and go to “Settings” to configure the adapter settings.
Here you can select the VOCOM II and then “Activate” to enable.
Next, click on OK to close window.
Please note: VOCOM I and VOCOM II use different drivers and must be activated separately.
8.You’re now ready to connect to a vehicle!